Duals1 - Loudspeaker Lamax - Free user manual and instructions

Product Type	Portable Bluetooth Speaker
Brand	Lamax
Model	Duals1
Bluetooth Version	5.0
Wireless Range	Up to 10 meters
Battery Type	Lithium-ion rechargeable
Battery Capacity	1200 mAh
Playback Time	Up to 8 hours
Charging Time	2-3 hours
Charging Port	Micro USB
Audio Input	Bluetooth, AUX 3.5mm
Speaker Output	5W RMS
Dimensions (LxWxH)	10 x 10 x 10 cm
Weight	300 g
Water Resistance	IPX5
Hands-free Calling	Built-in microphone
MicroSD Card Slot	Yes, up to 32 GB
FM Radio	Yes
Package Contents	Speaker, USB cable, AUX cable, Manual
Warranty	2 years

Frequently Asked Questions - Duals1 Lamax

How do I turn on the Lamax Duals1 speaker?

How do I pair the speaker with my phone via Bluetooth?

Can I use the speaker while charging?

What is the battery life of the Duals1?

How do I charge the speaker?

Does the speaker have a microphone for hands-free calls?

Can I play music from a microSD card?

What do the LED indicators mean?

How do I reset the speaker?

Is the speaker waterproof?

USER MANUAL Duals1 Lamax

Line drawing of an LAMAX wireless earbuds with open case (no text or symbols on device)

Controls

On	Hold down the multifunction button for 3 seconds
Off	Hold down the multifunction button for 4 seconds
Play / Pause	Press the multifunction button
Next track	Hold down the multifunction button on the right earphone for 2 seconds
Previous track	Hold down the multifunction button on the left earphone for 2 seconds
Accept / End call	Press the multifunction button
Reject call	Hold down the multifunction button for 2 seconds
Activate smart assistant	Press the multifunction button 3 times

Switching on

The earphones switch on automatically when removed from the charging station. To switch on manually, hold down the multifunction button for 3 seconds. Both earphones must be manually turned on separately. When switched on, an audible alert sounds and the blue LED flashes.

Switching off

The earphones switch off automatically when inserted into the charging station. To switch off manually, hold down the multifunction button on one of the earphones for 4 seconds. When switched off, an audible alert sounds and the red LED lights up.

Connecting

1. Remove the earphones from the charging station. The earphones will automatically pair to each other and an audio alert will sound. One of the earphones will act as the master and be ready for pairing, as indicated by the alternating flashing of the blue and red LEDs. On the other earphone the blue LED will flash.

2. Switch on Bluetooth on your device and search for LAMAX Duals1 in the list of available Bluetooth devices. After successfully connecting, an audible alert sounds and the LED goes off.

If there are problems with making a connection, remove the earphones from the list of connected devices on your smartphone. Take the earphones out of the charging station. The earphones will automatically turn on and be ready to connect. Turn them off by holding the multifunction button for 4 seconds. Then manually hold down the multifunction button on both earphones for 10 seconds until the LEDs on both flash red and blue 3 times, then turn off for a moment and then flash blue. Place them back into the charging station and connect as described in step 1.

Charging

To charge the charging station, plug the cable into the USB-C port on the back of the charging station and plug the other end of the cable into a USB power supply with a maximum voltage of 5 V. When charging, the LEDs will gradually light up according to the charging status. When fully charged, all 4 LEDs will be lit.

To charge the earphones, place them into the charged charging station. When charging, the LEDs in the earphones light up red.

Parameters

Wireless technology	Bluetooth 5.0
Max. connection range	up to 15 meters
Supported codecs	aptX, AAC, SBC
Earphones battery capacity	55 mAh
Charging station capacity	500 mAh
Earphones charging time	1.5 hours
Playback time	up to 12 hours
Weight of each headphone	5 g
Weight including charging station	66 g

[Non-Text]

Printing errors reserved.

The current version of the user manual can be downloaded here:

https://lamax-electronics.com/duals1/manual

CE RoHS

Line drawing of an LAMAX wireless earbuds with open case and earpiece (no text or symbols)

Bedienung

Line drawing of an LAMAX wireless earbuds with open case and earphones (no text or symbols on devices)

Ovládání

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated underscores where none should exist based on the GT's visual context. Hence, the OCR result is inconsistent with the Ground Truth.
......

Line drawing of an LAMAX wireless earbuds with open case and earplush (no text or symbols)

Ovládanie

Line drawing of an LAMAX wireless earbuds with open case (no text or symbols on device)

Obsługa

Line drawing of an LAMAX wireless earbuds with open case (no text or symbols on device)

Vezérlés

Line drawing of an LAMAX wireless earbuds with open case and earphones (no text or symbols)

Upravljanje

Line drawing of an LAMAX wireless earbuds with open case and earplush (no text or symbols)

Upravljanje