N200RE V3 - Router Totolink - Free user manual and instructions

USER MANUAL N200RE V3 Totolink

If you access Internet by ADSL, please comply with step 1, 2, 3 and 4 in below diagram in correct order; if you access Internet by residential broadband, please comply with step 2, 3 and 4 to connect the WAN port of your router with the residential broadband directly.

LED Indicators
POWER (Ω)	Light on when router is power on
CPU (Ω)	Light on when system is working
MHz (Hz)	The indicator lights on active or low currents
MAX (Ω)	Light on when motor port connected to switching
	Light breaking after transmission up or receiving costs
I/O (A)	Light on when the I/O port is connected to circuits
	Light breaking after transmission up or receiving costs

Ports and Buttons Description
DC Ib	Used for ordered by the power source
VOLAN	Used for ordered by the rail to the IEC
WAL	Used for ordered by the rail to the internal.
UPS	Press the station for about 2 seconds, the GPS function
TEA	Used in a box press and hold the RGT station until all LECs are off, the owner will receive to battery rated sublogs.

1. Please disconnect the power adapter and all cables during
2. Kain was, my best, very well, well
3. Please pay attention to the waterproofing and moisture proof
   when shang, rng;wng and wng
4. The power adapter must be original or approved by JOTELN4.
5. For the name in 3rd place

2 Set Up PC

Windows Vista7

For Windows Vista or Windows 7 Operating System, please comply with following steps to set up.

1 Click Start—Control Panel—Network and Internet—Network Connection, right side Local Area Connection, and choose Properties.

② Source disk Internet Protocol Version 4 (TCP/IPv4).

③ Choose Obtain an IP address automatically and Obtain DNS server address automatically, click OK; And then click OK.

Windows 10

For Windows 10 Operating System, please comply with following steps to set up.

Start: All apps Windows com—Control Panel—Network and ring Center Change adapter ing, right-skk Local Area Connection listes Properties

② Double disk Internet Protocol Version 4 (TCP/IPv4).

③ Choose Obtain an IP address automatically and Obtain DNS server address automatically, disk OK And then pack OK

3 Set Up Router

Please set up the router following below steps.

1 Run any Web wherever.

2 Type 192.168.1.1 in the web between, their phone Enterkey

182.160.1.1

③ Enter User Name and Successful Site (the site) to Use Name and Successful Site admin. From which LOCIN or non-Listion

4 How you can see the Easy Setup Interface.

Data Entry Data Entry: 100% Data Entry Data Entry: 100% Data Entry Output Data Data Entry: 100% Data Entry: 100% Output Data Data Entry: 100% Data Entry

⑤ Choose the WAN Access Type and enter the controller provided by your Internet Service Provider.

6 Here we take PFPuE as examples. You are required to enter the user come and password...

7 'Wireless Settings, you can change or retain your SSD (with one network name).

8 Choose the encryption type. The APA2-Mixed is recommended. Than type in your environment (personality, height more than 5 connections)

9 By default, IFTV is disable. It enable this function, please enter the W/AN ID and choose control IFTV port. Then click Apply to save the settings

10 Wait for a while, normal connected successful if Please click finish.

Successful Connection!! you have successful internet all the information required to bring your user!

Now the router's Status Interface turns up, if shows connected type and P'adience & ONS you get.

Add Subtype Subtype Subtype Subtype Subtype Subtype Subtype Subtype Subtype Subtype Subtype Subtype Subtype Subtype Subtype Subtype Subtype Subtype Subtype Subtype Subtype Subtype Subtype Subtype Subtype Subtype Subtype Subtype Subtype Subtype Subtype Subtype Subtype Subtype Subtypes Subtypes Subtypes Subtypes Subtypes Subtypes Subtypes Subtypes Subtypes Subtypes Subtypes Subtypes Subtypes Subtypes Subtypes Subtypes Subtypes Subtypes Subtypes Subtypes Subtypes Subtypes Subtypes Subtypes Subtypes Subtypes Subtypes Subtypes Subtypes Subtypes Subtypes Subtypes Subtypes Subtypes

⑫ Try any assets to bind the internet. I are not types in www.leclink.net.

TOTO LINK AC1600 The mini Duct & Part 10 (EC) www.toto.com

4 FAQ

① How to reset the router to default settings?

1. Please make sure your order, let's get a right, then can a put in over the RST option for your 1-2s.

2. Loosen the button until your motor's LED lights at flashing, then you have read your router to default settings.

② Forget the password?

P notes need your order to default seeking directly, valid and a rate presented. The default: IP 192.168.1.1 The default: User name: admin The default: Password: admin

Auto Pop-up Setting page for First Wi-Fi Devices Connection

① C#k Settings → Wi-Fi

② Seed TOTCUMK 10%RE, enter the NFI

③ When connected the 'Web page of TOTALINK H10ORE will stop us automatically.

the non-shelfs. (www.018) www.shelfs