Sfoglia Prof G20125 - Pasta machine G3 Ferrari - Free user manual and instructions

Product Type	Pasta Machine
Brand	G3 Ferrari
Model	Sfoglia Prof G20125
Power Supply	AC 230V ~ 50Hz
Power Consumption	70W
Thickness Settings	7 levels (1 thinnest, 7 thickest)
Cutting Formats	Spaghetti and Tagliatelle
Maximum Continuous Operation	90 minutes
Rest Period	30 minutes
Protection Class	Class II (Double Insulated)
Cleaning Method	Hand wash with soft brush or damp cloth; do not use dishwasher or immerse main body in water
Accessories Included	Flat pasta maker, 2 cutting rolls for tagliatelle and spaghetti
Intended Use	Making homemade flat pasta and cutting into spaghetti or tagliatelle
Safety Features	Overheat protection via recommended rest; do not operate unattended; keep hair and clothing away from moving parts
Control Type	ON/OFF switch and thickness selector knob

Frequently Asked Questions - Sfoglia Prof G20125 G3 Ferrari

How do I use the flat pasta maker?

Place the knob on position 7 (thickest). Insert a ball of dough into the rolls. Accompany the dough with both hands, fold it in two, add flour, and pass again. Repeat until smooth, then gradually adjust to thinner settings.

How do I adjust the thickness of the pasta?

Use the thickness knob (4). Position 7 is the thickest and 1 is the thinnest. Start at 7 and progressively move to lower numbers after each pass for even thinning.

How do I cut pasta into spaghetti or tagliatelle?

After making a flat sheet, let it dry for 10 minutes. Then insert the sheet into the desired cutting roll (spaghetti or tagliatelle). The machine will cut it automatically.

Can I wash the parts in a dishwasher?

No, do not wash any part in a dishwasher. The flat pasta maker and cutting rolls must be cleaned by hand with a soft brush or damp cloth.

How should I clean the pasta machine?

Unplug the unit. Use a damp cloth and non-abrasive detergent for the main body, avoiding water inside motor housing. For the rolls, use a soft brush to remove residues. Do not immerse in water.

How long can I use the machine continuously?

Do not operate for more than 90 minutes continuously. Then allow the machine to rest for at least 30 minutes to prevent overheating.

What should I do if the dough sticks to the rolls?

Add a little flour to the dough before each pass. Ensure the dough is not too wet. If sticking persists, gently brush the rolls with a soft brush after cleaning.

Is the pasta machine safe to use?

Yes, it is a Class II double insulated appliance. However, always follow safety instructions: keep children away, do not touch with wet hands, and never insert fingers or hard objects into the rolls while operating.

What should I do if the machine jams?

Immediately switch off and unplug the machine. Do not force the rolls. Gently remove the jammed dough by hand or with a wooden utensil. Avoid using metal objects.

Where can I get service or spare parts?

Contact the authorized service center via phone at 0541 694246 or email [e-mail]. Use only original spare parts to maintain safety and warranty.

USER MANUAL Sfoglia Prof G20125 G3 Ferrari

Exterior view of a Ferrari pasta mill (no text or symbols visible on the device body)

Safety instructions.... p. 7

General information.... p. 9

G20125 p. 10

Functioning p. 10

Usage p. 10

Cleaning.... p. 10

Technical features.... p. 10

Waste of Electric and Electronic Equipment (WEEE

Directive)....p. 10

CLASSI DI PROTEZIONE / PROTECTION CLASSES

ATTENZIONE RISCHIO DI SCOSSE ELETTRICHE NON ESPORRE A PIOGGIA E UMIDITA'

WARNING ELECTRIC SHOCK RISK DO NOT EXPOSE TO RAIN OR MOISTURE

ATTENZIONE: NON APRITE L'APPARECCHIO. ALL'INTERNO NON VI SONO COMANDI MANIPOLABILI DALL'UTENTE NE' PARTI DI RICAMBIO. PER TUTTE LE OPERAZIONI DI SERVIZIO RIVOLGERSI AD UN CENTRO DI ASSISTENZA AUTORIZZATO.

This symbol warns the user that un-insulated dangerous voltage inside the system may cause an electrical shock. Do not open the case.

Class II Appliance symbol. The double insulated electrical appliance is one which has been designed in such a way that it does not require a safety connection to electrical earth/ground.

Caution: this symbol reminds the user to read carefully the important operations and maintenance instructions in this owner's guide.

AVVERTENZE DI SICUREZZA

ENGLISH: SAFETY INSTRUCTIONS

The following are important notes on the installation, use and maintenance; save this instruction manual for future reference; use the equipment only as specified in this guide; any other use is considered improper and dangerous; therefore, the manufacturer cannot be held responsible in the event of damages caused by improper, incorrect or unreasonable use.

Before use, ensure the equipment is undamaged; if in doubt, do not attempt to use it and contact the authorized service center; do not leave packing materials (i.e. plastic bags, polystyrene foam, nails, staples, etc.) within the reach of children as they are potential sources of danger; always remember that they must be separately collected. Make sure that the rating information given on the technical label are compatible with those of the electricity grid; the installation must be performed according to the manufacturer's instructions considering the maximum power of the appliance as shown on the label; an incorrect installation may cause damage to people, animals or things, for which the manufacturer cannot be considered responsible thereof.

If it is necessary to use adapters, multiple sockets or electrical extensions, use only those that comply with current safety standards; in any case do not exceed the power consumption limits indicated on the electrical adapter and / or extensions, as well as the maximum power shown on multiple adaptor.

Do not leave the unit plugged; better to remove the plug from the mains when the device is not in use. Always disconnect from power supply if you leave it unattended. Cleaning operations should be carried out after unplugging the unit.

If the unit is out of order and you do not want to fix it, it must be made inoperable by cutting power cord.

• Do not allow the power cord to get closer to sharp objects or in contact with hot surfaces; do not pull it to disconnect the plug.
• Do not use the appliance in the event of damage to the power cord, plug, or in case of short circuits; to repair the product only address an authorized service center.
• Do not handle or touch the appliance with wet hands or bare feet. Do not expose the appliance to harmful weather conditions such as rain, moisture, frost, etc.. Always store it in a dry place.

- Children must not play with the appliance.

- This appliance cannot be used by children, even if they're more than 8 years old.

- This appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they received supervision or instruction concerning use of appliance in a safe way and understand the hazards involved.

- Keep the appliance and its cord out of reach of children less than 8 years.

If the power cord is damaged, or in case of failure and / or malfunction do not tamper with the unit. The reparation must be done by manufacturer or by service center authorized by the manufacturer in order to prevent any risk. Failure to comply with the above may compromise the unit safety and invalidate the warranty.

- This appliance is intended to be used in household and similar applications such as: staff kitchen areas in shops,

offices and other working environments; by clients in hotels, motels and other residential type environments; farm houses, bed and breakfast type environments.

• The appliance is not intended to be operated by means of an external timer or separate remote-control system.
• Before every use, unroll the power cord.
• Use original spare parts and accessories only.
• Do not subject the product to strong impacts, serious damages may result.
• Do not use near or under flammable materials (like curtains), heat, cold spots and steam.

GENERAL INFORMATION

Intended use: this appliance is designed to make homemade flat pasta and to cut it in 2 formats of pasta.

CAUTION: do not wash in dishwasher, do not wash under water.

• Before first use, wash carefully all parts, as they will come into contact with food.
• Before first use, pass some dough in all the parts of the 3 rolls, in order to collect eventual impurities.
• To avoid the overheating of the engine does not use the appliance running continuously for more than 90 minutes; in this case interval with at least 30 min rest.

- Do not put your fingers inside the rolls while the unit is operating. Do not insert hard objects.

Keep hair and clothing away from moving parts.

• Place the unit on a flat, stable and not slippery surface.
• Bring knob on "0" (OFF) position before inserting the plug in the socket.
• Clean the accessories after each use.
• Never leave the appliance unattended while it is running.
• Do not immerse the main unit in water or other liquids; clean it with a damp cloth.

G20125

1. Roll flat pasta maker

2. Knob for thickness

3. Roll for tagliatelle

4. ON/OFF switch

5. Roll for spaghetti

6. Motor housing

FUNCTIONING

At the first use, pass some dough in all the parts of the 3 rolls, in order to collect eventual impurities.

• Place the appliance on a stable and flat surface.
• Appliance can be switched on with the switch (5), and is switched off by the same button.

FLAT PASTA MAKER

Use the flat pasta maker (1) to make pasta flat, in 7 possible thickness levels. That flat pasta can be used to make lasagne, or can be cut to make any format of pasta (with one of the rolls or with a knife), or can be used to make filled pasta.

• Place regulation knob (4) on “7” (biggest thickness). Insert a ball of dough previously prepared in the roll.
• Accompany the passage of the dough in the rolls with both hands (one over the roll and one under), tending the dough to get a better result. Fold the dough in two and put flour. Pass again the dough in the rolls and repeat operation even several times until a homogeneous sheet is obtained.
• To make the sheet more thin, move the knob (4) to the next positions (7 is the thickest and 1 the thinnest).
• Repeat above operations in various positions of the knob, going from thick to thin, until obtaining the desired thickness. Put flour before every passage in the rolls.

CUTTING ROLLS

After having obtained the sheet of pasta as described in the paragraph “Flat pasta maker”, this sheet can be cutted, making it pass in one of the rolls included. Before inserting the sheet in the cutting roll, is advised to wait 10 minutes in order to dry the sheet of pasta and have a better cutting.

You can obtain 2 formats: spaghetti and tagliatelle.

CAUTION: to not make the motor work continuously for more than 90 minutes. In this case make it cool down for 30 minutes.

When operation is finished, stop appliance with the switch (5).

After finishing operation, clean as described in the paragraph “Cleaning”

CLEANING - Unplug the unit.

CAUTION: do not wash in dishwasher. Do not wash with water or with detergents.

Do not immerse the main body (6) in water, only wash it with a damp cloth and non-abrasive detergent. Avoid any infiltration of water inside motor housing.

Flat pasta maker and double rolls cannot be washed in the dishwasher. To remove big residues stucked, do not use hard objects, but a gentle brush. To remove flour of soft residues, use a soft brush or a damp cloth.

TECHNICAL FEATURES

• Power supply: AC 230V\~50Hz. Power 70W
• Accessories: flat pasta maker, 2 cutting rolls for tagliatelle and spaghetti

WASTE OF ELECTRIC AND ELECTRONIC EQUIPMENT

The product is made of non-biodegradable and potentially polluting substances if not properly disposed of; other parts can be recycled. It's our duty to contribute to the ecological health of the environment following the correct procedures for disposal. The crossed out wheelie bin symbol indicates the product complies with the requirements of the new directives introduced to protect the environment (2002/96/EC, 2003/108/EC, 2002/95/EC, 2012/19/EC) and must be properly disposed at the end of its lifetime. If you need further information, ask for the dedicated waste disposal areas at your place of residence. Who does not dispose of the product as specified in this section shall be liable according to the law.

To find the nearest service center, please call the telephone number 0541 694246, fax number 0541 756430 or contact us at [e-mail] asking for the service centers supervisor.

TREVIDEA S.r.l. reserves the right to make ELECTRICAL, TECHNICAL and AESTHETIC changes to the devices and / or replace parts without prior notice to always offer more reliable, durable and advanced technology. TREVIDEA S.r.l. also would like to apologize for any possible printing errors.