NEO+ - Keyboard Connect IT - Free user manual and instructions

USER MANUAL NEO+ Connect IT

Black adjustable gaming table with visible legs and a 'NEON PSS Gaming Desk' label on the side (no other text or symbols)

RGB GAMING TABLE

RGB SPIELTISCH

RGB HERNÍ STŮL

HERNÝ STÔL RGB

GAMER ASZTAL RGB VILÁGÍTÁSSAL

CGD-2020-BK

EN

Before putting this product into operation, please read carefully all the instructions, even if you are already familiar with using similar products. Use the product only as described in this manual. Keep this manual in case you need it for future reference.

The electronic version of this user manual can be downloaded on the website www.connectit-europe.com.

We recommend keeping the original packaging of the product, invoice and warranty certificate at least for the time the warranty is valid. When shipping the product, we recommend using the original packaging that the product was delivered in that will provide the best protection for it from being damaged during transport.

1 Warning

• Use with products heavier than the rated weights indicated may result in instability causing possible injury.
• Use the mounting screws provided and DO NOT OVER TIGHTEN mounting screws.
  ● This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
  ● This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.

2 Specifications

• Desk top colour: Carbon
• Desk legs colour: Black
• Quick and easy assembly
• RGB backlit
  ● Max. load capacity: 100 kg

1200 mm 600 mm 750 mm 18 mm

3 Package contents

EN

3D rendering of a rectangular object with two small holes, labeled '1x' and marked with letter 'A' (no other text or symbols)

Technical diagram of a mechanical component with labeled part B and 1x multiplier (no text or symbols beyond labels)

Technical illustration of a mechanical component with three blades and a central shaft, labeled '1x' (no text or symbols on the diagram itself)

3D diagram of a rectangular electronic component with labeled dimension (1x), no text or symbols present

3D diagram of a computer monitor with labeled pins and a 1x multiplier indicator (no text or symbols on the device itself)

Simple 3D mechanical part diagram labeled '1x' with a black circle and letter 'F' above it (no text or symbols on the part itself)

Technical line drawing of a mechanical bracket with a labeled section 'G' and dimension '1x' (no text or symbols on the diagram itself)

Illustration of a screw with a triangular head and a circular head, labeled '5x' below (no text or symbols on the screw itself)

Close-up of a metallic screw with threaded shaft and circular head (no text or symbols)

Simple L-shaped metal angle with a circular label 'J' and the number '1x' below (no text or symbols on the angle itself)

K 1x

Simple 3D diagram of a circular object with a label 'L' and '1x' below it, no other text or symbols present.

M

NEO+ | RGB GAMING DESK

2x

EN

4 Assembly

1. 

Technical diagram of a mechanical support structure with labeled components A through J, including mounting brackets and structural details.

EN

1. 

USB F H H G

1. 

Technical diagram of a desktop kitchen with labeled parts and step-by-step instructions for cleaning or cooling.

EN

1. 

40 mm 69 mm M

5 Description of each part

EN

A

① Increase the intensity of colour / Increase the repetition rate of colour modes
2 Decrease the intensity of colour / Decrease the repetition rate of colour modes
3 Off switch
4 On switch
5 16 static colour modes (Shades of red, green, blue and white)
6 Breathing effect of white colour
⑦ Sudden change of 7 colours (green, blue, yellow, purple, tyrquise, white, red)
8 Gradual change of 7 colours (green, blue, yellow, purple, tyrquise, white, red)
9 Sudden change of 3 colours (red, green, blue)

2 OFF ON R G B W FLASH STROBE FADE SMOOTH 5 6 7 8 9

3D rendering of a rectangular electronic component with two mounting holes, labeled '1x' and marked with letter 'A' (no other text or symbols)

Technical line drawing of a mechanical component with two triangular blades and a central shaft, labeled '1x' (no text or symbols beyond labels)

Technical line drawing of a three-bladed mechanical component with no visible text or symbols

3D diagram of a rectangular electronic component with labeled dimension (1x), no text or symbols present

3D diagram of a computer monitor with labeled parts (E and 1x), no text or symbols present.

Simple 3D mechanical part with a zigzag edge and a labeled point 'F' (no text or symbols on the part itself)

Technical line drawing of a mechanical clamp or bracket component (no text or symbols)

Close-up of a screw with a triangular head and circular head, labeled '5x' below (no other text or symbols)

Close-up of a metallic bolt with threaded shaft and hexagonal head, labeled '16x' below (no other text or symbols)

Simple L-shaped metal rod with a black circular label containing the letter 'J' and the number '1x' below it (no other text or symbols)

K 1x

Simple 3D diagram of a white oval object with a black circular symbol labeled 'L' above it, and the text '1x' below (no other text or symbols)

M

NEO+ | RGB GAMING DESK

2x

4 Montage

DE

1.

Technical diagram of a mechanical support structure with labeled components A through J, including mounting brackets and structural details.

1. 

USB F H H G

DE

1. 

Technical diagram of a kitchen appliance with labeled parts and step-by-step instructions for cleaning or cooling.

3D rendering of a rectangular object with two small holes, labeled 'A' and '1x' (no text or symbols on the object itself)

Technical diagram of a mechanical component with labeled part B and 1x multiplier (no text or symbols beyond labels)

Technical diagram of a mechanical component with three blades and a central shaft, labeled '1x' (no text or symbols on the diagram itself)

3D diagram of a rectangular electronic component with labeled dimension (1x), no text or symbols present

Diagram of a computer monitor with labeled pins and scaling indicator (1x), no text or symbols present.

Simple 3D mechanical part diagram labeled '1x' with a black circle and letter 'F' above it (no text or symbols on the part itself)

Technical line drawing of a mechanical clamp or bracket component (no text or symbols)

Close-up of a screw with a circular head and threaded shaft, labeled '5x' below (no other text or symbols)

Close-up of a metallic bolt with threaded shaft and hexagonal head (no text or symbols)

Simple L-shaped metal rod with a black circular marker labeled 'J' and the number '1x' below (no text or symbols on the rod itself)

K 1x

Simple 3D diagram of a circular object with a labeled point 'L' and the label '1x' below (no text or symbols on the object itself)

M

NEO+ | RGB GAMING DESK

2x

4 Montáž

1. 

Technical diagram of a mechanical support structure with labeled components A through J, including mounting brackets and structural details.

CZ

CZ

1. 

USB F H H G

1. 

Technical diagram of a kitchen appliance with labeled parts and step-by-step instructions for cleaning or cooling.

1. 

40 mm 69 mm M

CZ

3D rendering of a white rectangular object with two small holes, labeled 'A' and '1x' below (no text or symbols on the object itself)

Technical diagram of a mechanical component with labeled part B and 1x multiplier (no text or symbols beyond labels)

Technical illustration of a three-bladed mechanical component with no visible text or symbols

3D diagram of a rectangular mechanical part with a labeled dimension (1x), no text or symbols present.

3D diagram of a rectangular electronic component with a labeled section 'E' and dimension annotation '1x' (no text or symbols on the object itself)

Simple 3D mechanical part diagram labeled '1x' with a circular icon containing the letter 'F' (no text or symbols on the part itself)

Technical line drawing of a mechanical component with a labeled section 'G' and dimension '1x' (no text or symbols on the object itself)

Illustration of a screw with a triangular head and threaded shaft, labeled '5x' (no text or symbols on the screw itself)

Close-up of a 16x bolt with threaded shaft and circular head (no text or symbols on the object itself)

Simple L-shaped metal angle with a circular label 'J' and the text '1x' below it (no other text or symbols)

K 1x

Simple 3D diagram of a circular object with a labeled point 'L' and the label '1x' below (no text or symbols on the object itself)

M

NEO+ | RGB GAMING DESK

2x

4 Montáž

1. 

Technical diagram of a mechanical support structure with labeled components A through J, including mounting brackets and structural details.

SK

1. SK
   

USB F H H G

1. 

Technical diagram of a desktop desk with labeled parts and step-by-step instructions for handling a device.

1. 

40 mm 69 mm M

SK

3D rendering of a rectangular object with two small holes, labeled 'A' and '1x' (no text or symbols on the object itself)

Technical diagram of a mechanical component with labeled part B and 1x multiplier (no text or symbols beyond labels)

Technical illustration of a three-blade propeller or turbine blade assembly (no text or symbols)

3D diagram of a rectangular electronic component with labeled dimension (1x), no text or symbols present

Diagram of a 1x2 hard disk component with labeled section E (no text or symbols on the diagram itself)

Simple 3D mechanical part diagram labeled '1x' with a black circle and letter 'F' above it (no text or symbols on the part itself)

Technical line drawing of a mechanical bracket with a labeled section 'G' and dimension '1x' (no text or symbols on the diagram itself)

Illustration of a screw with a triangular head and a circular head, labeled '5x' below (no text or symbols on the screw itself)

Close-up of a metallic screw with threaded shaft and circular head (no text or symbols)

Simple L-shaped metal rod with a circular label containing the letter 'J' and the number '1x' below it (no additional text or symbols)

K 1x

Simple 3D diagram of a circular object with a labeled point 'L' and the label '1x' below it (no text or symbols on the object itself)

M

NEO+ | RGB GAMING DESK

2x

4 Összeszerelés

1. 

Technical diagram of a mechanical assembly with labeled components A through J, showing structural components and mounting details.

HU

1. HU
   

USB F H H G

1. 

Technical diagram of a small table with labeled parts and a magnified view showing the process step.

1. 

40 mm 69 mm M

HU

Two stylized animal figures, one in teal and one in black, walking side by side (no text or symbols)

connect IT®

MANUFACTURER

HERSTELLER

VÝROBCE

VÝROBCA

GYÁRTÓ

IT TRADE, a.s.

Brtnická 1486/2

101 00 Praha 10

Czech Republic

tel.: [phone]

[e-mail]

www.connectit-europe.com