SWG-TABLE915 - Welding table Stamos - Free user manual and instructions

USER MANUAL SWG-TABLE915 Stamos

Technical diagram of a multi-level industrial machine with numbered components and labeled parts

*Note: the declared loading capacity applies only to a uniformly distributed load (UDL). Point loading or uneven load distribution may cause damage to the product.

1. General overview

This manual is intended to assist you in safe and reliable use. The product is designed and manufactured strictly according to technical specifications using the latest technology and components and maintaining the highest quality standards.

CAREFULLY READ AND UNDERSTAND THIS MANUAL BEFORE STARTING THE WORK.

To ensure long and reliable operation of the device, make sure to operate and maintain it properly in accordance with the guidelines in this instruction manual. The technical data and specifications in this manual are up-to-date. The manufacturer reserves the right to modifications for the purpose of quality improvement.

Explanation of symbols

Read the manual before use.

CAUTION! The figures in this manual are illustrative only and may vary in some details from the actual appearance of the product.

2. Safety of use

CAUTION! Read all safety warnings and all instructions. Failure to follow warnings and instructions could result in serious injury or even death.

The term "equipment" or "product" in the warnings and in the description of the manual refers to WELDING TABLE.

a) Keep the work area tidy and well lit. Disorder or poor lighting can lead to accidents. Be foresighted, watch what you are doing and use common sense when using the device.

b) If in doubt as to whether the product is working properly or found to be damaged, contact the manufacturer's technical service.

c) Only the manufacturer's service department may repair the appliance. Do not attempt to repair the product on your own!

d) Keep this manual for future reference. If the product is to be handed over to a third party, hand it over with this user manual.

e) Keep packaging components and small installation parts out of the reach of children.

f) When using this product together with other devices, also follow the other instructions for use.

g) Keep the device in good working order.

h) Repairs and maintenance should be carried out by qualified personnel using only original spare parts. This will ensure the safety of use.

i) When transporting or moving the device from storage to the place of use, observe the health and safety rules for manual handling applicable in the country where the device is used.

j) Clean the product on a regular basis to avoid permanent deposits.

k) Do not tamper with the device to alter its performance or design.

I) Do not exceed the maximum load of the product.

m) Always make sure that all wheel brakes are applied when the product is not in transit.

CAUTION! Although the product has been designed to be safe, with adequate safeguards, and despite the additional safety features provided to the user, there is still a slight risk of accident or injury when handling the product. Caution and common sense are advised when using the product.

3. Rules of use

The product is intended to be used as a horizontal work surface during welding or woodworking.

The user is responsible for any damage resulting from misuse.

3.1. Product description

Technical diagram of a multi-level industrial machine with numbered components and labeled parts

1 - Table top (1 pc.)
2 - Screw (16 pcs.)
3 - Washer (16 pcs.)
4 - Spring washer (16 pcs.)
5 - Nut (16 pcs.)
6 - Legs (4 pcs.)

7 - Bottom plate (1 pc.)
8 - Wheel (4 pcs.)

3.2. Product assembly

• It is recommended that the assembly be performed by at least 2 people.
• During assembly, provide sufficient space for safe and convenient rotation and lifting of the product components.
• It is recommended to use gloves during assembly.
• Assemble the product as shown in chapter 3.1 "Product description".

3.3. Cleaning and maintenance

a) Use only non-corrosive cleaning agents for cleaning the surfaces.
b) Store the product in a dry and cool place protected from moisture and direct sunlight.
c) Use a soft cloth for cleaning.

Dane techniczne

UWAGA! The figures in this manual are illustrative only and may vary in some details from the actual appearance of the product.

Technical diagram of a multi-level industrial machine with numbered components and labeled parts

Technical diagram of a multi-level industrial machine with numbered components and labeled parts

1 - Deska stolu (1 ks)
2 - Šroub (16 ks)
3 - Podložka (16 ks)
4 - Pružinová podložka (16 ks)
5 - Matice (16 ks)
6 - Nohy (4 ks)

Technical diagram of a multi-level industrial machine with numbered components and labeled parts

Technical diagram of a multi-level industrial machine with numbered components and labeled parts

1 - Piano del tavolo (1 pz.)
2 - Vite (16 pz.)
3 - Rondella (16 pz.)
4 - Rondella elastica (16 pz.)
5 - Dado (16 pz.)
6 - Gambe (4 pz.)

Technical diagram of a multi-level industrial machine with numbered components and labeled parts

1 - Tablero (1 ud.)
2 - Tornillo (16 uds.)
3 - Arandela (16 uds.)
4 - Arandela elástica (16 uds.)
5 - Tuerca (16 uds.)
6 - Patas (4 uds.)

7 - Placa inferior (1 ud.)
8 - Rueda (4 uds.)

Technical diagram of a multi-level industrial machine with numbered components and labeled parts

Technical diagram of a multi-level industrial machine with numbered components and labeled parts

1 - Bordplade (1 stk.)
2 - Skrue (16 stk.)
3 - Skive (16 stk.)
4 - Fjederskive (16 stk.)
5 - Møtrik (16 stk.)
6 - Ben (4 stk.)

Technical diagram of a multi-level industrial machine with numbered components and labeled parts

Technical diagram of a multi-level industrial machine with numbered components and labeled parts

Technical diagram of a multi-level industrial machine with numbered components and labeled parts

1 - Bordplate (1 stk.)
2 - Skrue (16 stk.)
3 - Skive (16 stk.)
4 - Fjærskive (16 stk.)
5 - Mutter (16 stk.)
6 - Ben (4 stk.)

7 - Bunnplate (1 stk.)
8 - Hjul (4 stk.)

3.2. Produktmontering

Technical diagram of a multi-level industrial machine with numbered components and labeled parts

1 - Bordsskiva (1 st.)
2 - Skruv (16 st.)
3 - Bricka (16 st.)
4 - Fjäderbricka (16 st.)
5 - Mutter (16 st.)
6 - Ben (4 st.)

7 - Bottenplatta (1 st.)
8 - Hjul (4 st.)

3.2. Produktmontering

Technical diagram of a multi-level industrial machine with numbered components and labeled parts

Technical diagram of a multi-level industrial machine with numbered components and labeled parts

1 - Doska stola (1 ks)
2 - Skrutka (16 ks)
3 - Podložka (16 ks)
4 - Pružinová podložka (16 ks)
5 - Matica (16 ks)
6 - Nohy (4 ks)

7 - Spodná doska (1 ks)
8 - Koliesko (4 ks)

Technical diagram of a multi-level industrial machine with numbered components and labeled parts

1 - Плот на маса (1 бр.)
2 - Винт (16 бр.)
3 - Шайба (16 бр.)
4 - Пружинна шайба (16 бр.)
5 - Гайка (16 бр.)
6 - Крака (4 бр.)

Technical diagram of a multi-level industrial machine with numbered components and labeled parts

Technical diagram of a multi-level industrial machine with numbered components and labeled parts

1 - Ploča stola (1 kom.)
2 - Vijak (16 kom.)
3 - Podloška (16 kom.)
4 - Opružna podloška (16 kom.)
5 - Matica (16 kom.)
6 - Noge (4 kom.)

7 - Donja ploča (1 kom.)
8 - Kotač (4 kom.)

3.2. Sastavljanje proizvoda

Technical diagram of a multi-level industrial machine with numbered components and labeled parts

1 - Stalviršis (1 vnt.)
2 - Varžtas (16 vnt.)
3 - Poveržlė (16 vnt.)
4 - Spyruokliné poveržlé (16 vnt.)
5 - Veržlè (16 vnt.)
6 - Kojelès (4 vnt.)

7 - Apatiné plokště (1 vnt.)
8 - Ratas (4 vnt.)

3.2. Gaminio surinkimas

Technical diagram of a multi-level industrial machine with numbered components and labeled parts

Technical diagram of a multi-level industrial machine with numbered components and labeled parts

1 - Mizna plošča (1 kos)
2 - Vijak (16 kosov)
3 - Podložka (16 kosov)
4 - Vzmetna podložka (16 kosov)
5 - Matica (16 kosov)
6 - Noge (4 kosi)

7 - Spodnja plošča (1 kos)
8 - Kolo (4 kosi)

3.2. Sestavljanje izdelka

For the disposal of the device please consider and act according to the national and local rules and regulations.

CONTACT

expondo Polska sp. z o.o. sp. k.