2319FL - Pan Flama - Free user manual and instructions
Find the device manual for free 2319FL Flama in PDF.
User questions about 2319FL Flama
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Pan in PDF format for free! Find your manual 2319FL - Flama and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 2319FL by Flama.
USER MANUAL 2319FL Flama
Read all instructions carefully before using the device for the first time and keep this manual. Any use that does not comply with the instructions releases FLAMA from all responsibilities.
Before each use, make sure that the appliance, the socket and the cable are in good condition.
The device must be used under the normal conditions of use defined in this manual.

CAUTION: To avoid the risk of overheating, NEVER COVER the device.
Do not use this heater if it has been dropped;
Do not use the heater if there are visible signs of damage;
Use this heater on a horizontal, stable surface or hang it on the wall, as applicable.
It is advisable to keep the device out of the reach of children under 3 years of age, unless they are accompanied by an adult.
Do not place the device under a socket.
Do not use this appliance near baths, showers, washbasins or swimming pools.
WARNING: Do not use this heater in small rooms when they are occupied by persons unable to leave the room on their own initiative, except under constant supervision.
WARNING: To reduce the risk of fire, keep textiles, curtains or other flammable materials at least 1 m away from the air outlet.
Do not let water penetrate the device.
Do not touch the device with wet hands.
Do not insert any type of object inside the device (eg needles, etc.).
If the power cord is damaged in any way, it must be replaced by the manufacturer, an authorized Technical Assistance Center or
a qualified technician, in order to avoid any danger to the user.
To learn more about maintenance and cleaning operations, see the user guide that comes with the appliance.
Children between 3 and 8 years of age must only be able to switch the appliance on or off if it has been placed or installed in the normal operating position and if children are accompanied or have been instructed on how to use the appliance safely and understand all potential hazards. Children between 3 and 8 years of age must not install, adjust or clean the appliance, or carry out maintenance at the expense of the user.
ATTENTION: Some components of the appliance can reach very high temperatures and cause burns. Particular attention should be paid to the presence of children and vulnerable people.
This appliance can be used by children over 8 years of age and by persons with reduced physical, sensory or mental capabilities, or without experience or knowledge, if these persons are properly supervised or if they have received instructions regarding the safe use of the appliance and if the possible risks have been assimilated. Children must not use the appliance as a toy. Cleaning and user maintenance must not be carried out by children without supervision.
This product complies with the Electromagnetic Compatibility and Low Voltage Directives.
This instruction manual is also available in PDF format at www.flama.pt.
RECOMMENDATIONS
The electrical installation of the device and its use must comply with the standards in force in your country.
Do not use the appliance near flammable objects or products, and in general, keep a minimum distance of 50~cm from other objects (walls, curtains, nebulizers, etc.).
The appliance should be placed so that the power plug is accessible.
Do not pull the power cord or the appliance, even when unplugging.
This product is for domestic use only. Any professional, improper, or non-compliant use will void the warranty and the manufacturer accepts no liability.
Fully unwind the cord before each use.
Do not use an extension cord that is not suitable for the appliance's power.
Do not use the appliance in dusty environments or areas with fire risk.
OPERATION
Warning: To avoid overheating, do not cover the appliance or block the air inlets/ outlets.
Place the fan heater on a flat, solid surface.
Ensure that the mains voltage matches that indicated on the appliance.
Ensure the function selector is set to "Off" (0) before plugging it in.
Anti-Tip Over System - Automatic Shut-Off if Tipped
This appliance has a safety system that switches it off if it is knocked over or placed unstably. This feature helps prevent accidents and ensures safer use.
Internal Overheat Protection System
The unit has an internal system that shuts off the heating element in case of excessive temperature. The fan continues to operate to cool the unit, and normal operation resumes once cooled.
Function Selector
| 0 | Off |
| Fan - no heat | |
| Low heat | |
| 2 | High heat |
Use
Plug the appliance into a power socket. Ensure the plug fits firmly. A loose connection may overheat and damage the socket. It is normal for the cable and plug to heat during operation.
Turn the thermostat to the MAX setting first. Then turn the selector to "1" or "2" depending on desired heat.
To adjust the thermostat: turn clockwise to raise temperature, counterclockwise to lower it.
NOTE: It's normal for the appliance to cycle on/off to maintain the set temperature.
To use the fan only, turn the selector to the fan setting.
After use, turn both knobs to "0" and "MIN." and unplug the unit.
THERMOSTAT INSTRUCTIONS
Note: Ensure the thermostat is set to MAX before switching on.
Once the desired room temperature is reached, slowly turn the knob counterclockwise until a click is heard.
Then, turn it clockwise again until another click is heard. The device will turn on/off to maintain the set temperature.
TROUBLESHOOTING TIPS
If the heater shuts off unexpectedly or stops working, it may be due to safety features preventing overheating.
Check that the plug is connected to a working socket.
Check thermostat settings—it may have shut off after reaching the desired temperature.
CLEANING AND MAINTENANCE
Always unplug the unit before any maintenance or cleaning.
IMPORTANT! DO NOT IMMERSE IN WATER!
Clean the grilles with a vacuum cleaner brush attachment.
DO NOT ATTEMPT TO DISASSEMBLE THE DEVICE.
Clean the outer surface with a soft damp (not wet) cloth, and dry with a dry soft cloth.
DANGER: Do not use gasoline, thinners, abrasive cleaners, etc., as these will damage the heater.
NEVER USE ALCOHOL OR SOLVENTS.
ANOMALIES AND REPAIR
In case of malfunction, please take the appliance to an authorized Technical Assistance Service. Do not attempt to disassemble or repair the appliance, as this may be dangerous.
PROTECTING THE ENVIRONMENT

This symbol indicates the separate collection of electrical and electronic equipment.
The main objective of the separate collection of this waste is to reduce the
quantity to be disposed of, promote reuse, recycling and other forms of recovery in order to reduce its negative effects on the environment.
When it is no longer in use, this appliance must not be disposed of together with other unsorted municipal waste.
The user is responsible for delivering it free of charge to the selective collection facilities available for that purpose.
Pieces of equipment that are no longer in use can also be taken back at points of sale, by purchasing new pieces of equipment that are equivalent and have the same functions.
For more detailed information on collection points, please contact your City Council or a point of sale for this equipment.
INFORMATION REQUIREMENTS FOR ELECTRIC LOCAL SPACE HEATERS
| Contact Elements | Fábrica de Louças e Eletrodométricos, S.A. Rua Alto de Mirões, n° 249 | Industrial Zone | 3700-727 Cesar | PORTUGAL | |||||
| Model ID(s): 2319FL | ||||||
| Element Symbol Value Unit Item Unit | ||||||
| Heat power | Heat output type/room temperature control (select one) | |||||
| Rated heat output Pnom | 1,800-2,000 | Kw | Single-stage heat output and no room temperature control | No | ||
| Minimum heat input (indicative) | Pmin | 0,900 | Kw | Two or more manual stages, without room temperature control | No | |
| Maximum continuous heat output Pmax, C 2,000 | Kw | with mechanical thermostat room temperature control | Yes | |||
| Power consumption | with electronic room temperature control | No | ||||
| In off mode Po 0.00 W | Electronic room temperature control and day timer | No | ||||
| In standby mode | Psm | N/A | W | Electronic room temperature control and weekly timer | No | |
| In idle mode | Pidle | 0.00 | W | Other control options (multiple selections possible) | ||
| In network standby mode | Pnsm | N/A | W | room temperature control, presence sensing | No | |
| Standby with display or status information | No | room temperature control, with open window detection | No | |||
| Energy efficiency of seasonal space heating in active mode | hS, huh | 85.0 | % | Remote control option | No | |
| Adaptive Start Control | No | |||||
| Working time limitation | No | |||||
| Black Lamp Sensor | No | |||||
| Self-learning functionality | No | |||||
| Precision control | No | |||||
VENTILATEUR CHAUFFANT
CONSIGNES DE SECURITE
INSTRUCTIONS DU THERMOSTAT
DYSFUNCTIONNEMENTS ET REPARATIONS
This page has been deliberately left blank
- Keep the proof of purchase (receipt) for this product carefully. When a repair is made under these conditions, the technician will require proof of purchase. This assistance can only be provided once you have proven, with the proof of purchase, that your appliance is within the warranty period.
- The warranty period for this appliance is defined by the respective EU Directive in force on the date of purchase/delivery.
- Within the guarantee period, we will repair or replace, free of charge, any parts which, during the normal use of the appliance, have deteriorated as a result of a proven material or manufacturing defect.
- This warranty does not cover consumable items, light bulbs, easily breakable parts made of glass or plastic, or any other defects that do not impair its proper functioning.
- We accept no liability for damage caused by incorrect or careless use of the appliance, by its connection to an electrical current other than that indicated on the appliance's rating plate, by faulty electrical installation, or by atmospheric, chemical or electrochemical causes. Other claims or demands for compensation relating to objects which are not an integral part of the appliance will be denied.
- The provision of assistance under warranty does not extend the warranty period. Only within this period will assistance be provided under warranty. The right to assistance is only granted to the first purchaser of the device and cannot be transferred to a third party.
- The warranty expires when unauthorized persons have attempted to repair, modify or replace parts of the appliance.
- All expenses and risks of transportation to our factory or vice versa will always be borne by the buyer.
WARRANTY CONDITIONS
To benefit from the Technical Assistance service during the 36-month warranty period after the date of purchase, you will need to:
Present the Invoice/Proof of Purchase, stating the model and the manufacturing number of the product (whenever possible).
Note: Failure to present the aforementioned documents will be grounds for not providing services under warranty.