T6164-28 - Furniture parts Vevor - Free user manual and instructions

Product Type	Table Legs
Brand	Vevor
Model	T6164-28
Height	711.2 mm (28 inches)
Width	450 mm (17.7 inches)
Number of Legs	2
Maximum Load Capacity	454 kg (1000 lb)
Color	Black
Material	Steel (estimated)
Adjustable Feet	Yes, 18 adjustable leg pieces
Adjustable Foot Rests	Yes, 4 pieces
Assembly Required	Yes, recommended by 2 people
Tools Included	Wrench (1 piece)
Care and Cleaning	Clean with a soft, dry cloth. Avoid sharp objects.
Safety	Do not overload. Ensure secure installation. Keep out of reach of children.
Spare Parts	Legs, adjustable legs, nuts, foot rests available
Repairability	Individual components can be replaced
Warranty	Electronic warranty certificate available at www.vevor.com/support
General Information	Brand Vevor, model T6164-28. Manufactured by Shanghaimuxinmuyeyouxiangongsi. Imported by Sanven Technology Ltd.

Frequently Asked Questions - T6164-28 Vevor

How to install the Vevor T6164-28 table legs?

Follow the provided assembly instructions. It is recommended to have two people. Use the supplied wrench to tighten the nuts. Make sure the legs are securely fastened before use.

What is the maximum load capacity?

The maximum load capacity is 454 kg (1000 lb) for correct and complete assembly.

Are the legs adjustable in height?

Yes, this model includes 18 adjustable leg pieces and 4 adjustable foot rests to adjust height and stability on uneven surfaces.

What material are the table legs made of?

The material is not explicitly stated in the manual, but they are black in color and appear to be steel (common estimate for this type of product).

Can I use these legs for an outdoor table?

The manual does not specify outdoor use. It is recommended to protect them from moisture and use them in a dry indoor environment to avoid corrosion.

How to clean and maintain the table legs?

Clean with a soft, dry cloth. Avoid water and abrasive products. Do not use sharp objects that could scratch the surface.

Are the legs delivered with all necessary accessories?

Yes, the kit includes: 2 legs, 18 adjustable leg pieces, 4 nuts, 4 adjustable foot rests, and 1 assembly wrench.

Is there a warranty?

Yes, Vevor offers an electronic warranty certificate. For more information, visit www.vevor.com/support.

What to do if a part is missing or damaged?

Contact Vevor technical support via www.vevor.com/support to obtain replacement parts. Keep the proof of purchase.

Can I use these legs for a heavy marble table?

Check that the total weight of the table does not exceed 454 kg (1000 lb). Ensure the mounting surface is suitable and the legs are properly installed.

USER MANUAL T6164-28 Vevor

Technical Support and E-Warranty Certificate

www.vevor.com/support

TABLE LEGS

MODEL: T6164-28

We continue to be committed to providing you with tools at competitive prices. "Save Half", "Half Price", or any other similar expressions used by us represent an estimate of savings you might benefit from buying certain products with us compared to the major top brands, and do not necessarily cover all categories of tools offered by us.

You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.

MODEL: T6164-28

NEED HELP? CONTACT US!

Have product questions? Need technical support?

Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we will not notify you again if there are any technology or software updates to the product.

SAFE INSTRUCTIONS

CAUTION: Carefully read instructions and procedures for safe operations. Failure to do so can result in injury.

WARNING:

1. Before using the table legs, ensure that the table is securely installed to prevent personal injury and accidents.
2. When using the table legs, do not overload the handrail to avoid personal injury or accident.
3. Do not draw, cut, or use sharp objects on the legs to avoid damage.
4. If you need to disassemble the table legs, please follow the reverse steps to disassemble and store it properly.
5. This product is not a toy. Do not allow children with this item.

ASSEMBLY PRECAUTIONS

1. Assemble only according to these instructions. Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Keep the assembly area clean and well-lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or under the influence of alcohol, drugs, or medication.
6. Product capabilities apply to properly and completely assembled products only.
7. For additional information regarding the parts listed on the following pages, please refer to the Assembly Diagram of this manual. Unwrap and separate all parts in a clean work area.
8. For safety reasons, this hardware is recommended to be installed by 2 people.

SAVE THESE INSTRUCTIONS

Model	T6164-28
Height(inch/mm)	28 / 711.2
Number Of Legs (pcs)	2
Width (inch/mm)	17.7 / 450
Maximum Bearing Capacity(lbs/kg)	1000 / 454
Colour	Black

COMPONENTS

No.	Name	QTY.
A	Legs	2
B	Adjustable Leg	18
C	Nuts	4
D	Adjustable Foot Cup	4
E	Wrench	1

Manufacturer:

Shanghai Muxin Muye Youxian Gongsi

Address: Shuangchenglu

803, Nong 11, Hao 1602A-1609 Shi, Baoshan Qu,

Shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKE STREET, EASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

E-CrossStu GmbH

Mainzer Landstr. 69, 60329 Frankfurt am Main.

YH CONSULTING LIMITED.

EC

REP

UK

REP

E-CrossStu GmbH

Mainzer Landstr. 69, 60329

Frankfurt am Main.

YH CONSULTING LIMITED.

C/O YH Consulting Limited

Office 147, Centurion

House, London Road,

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

TABLE LEGS

MODEL: T6164-28

NEED HELP? CONTACT US!

C/O YH Consulting Limited

Office 147, Centurion

Staines-upon-Thames,

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

TABLE LEGS

MODEL: T6164-28

250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

C/O YH Consulting Limited

Office 147, Centurion

House, London Road,

Staines-upon-Thames,

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

TABLE LEGS

MODEL: T6164-28

Imported into AUS: SIHAO PTY LTD. 1 ROKEVA

STREET ASTWOOD NSW 2122 Australia

250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

C/O YH Consulting Limited

www.vevor.com/support

TABLE LEGS

MODEL: T6164-28

STREET ESTWOOD NSW 2122 Australia

250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

REPRESENTANTE CE

E-CrossStu GmbH

C/O YH Consulting Limited

Staines-upon-Thames,

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

TABLE LEGS

MODEL: T6164-28

NEED HELP? CONTACT US!

C/O YH Consulting Limited

Office 147, Centurion

House, London Road,

Staines-upon-Thames,

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

TABLE LEGS

MODEL: T6164-28

NEED HELP? CONTACT US!

C/O YH Consulting Limited

Office 147, Centurion

House, London Road,

Staines-upon-Thames,

VEVOR®

TOUGH TOOLS, HALF PRICE

warranty certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

TABLE TOP

MODEL: T6164-28

NEED HELP? CONTACT US!

250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329

Frankfurt am Main.

YH CONSULTING LIMITED.

C/O YH Consulting Limited

Office 147, Centurion

House, London Road,

Staines-upon-Thames,

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support