T10569 - Furniture parts Vevor - Free user manual and instructions

Product Type	Table Legs
Brand	Vevor
Model	T10569
Available Heights (mm)	406.4 / 482.6 / 711.2
Available Heights (inches)	16 / 19 / 28
Number of Legs	4
Maximum Load Capacity (kg)	227
Maximum Load Capacity (lb)	500
Color	Black
Material	Steel (estimated)
Included Components	4 legs, 22 screws, 4 rubber floor pads
Power Source	None (mechanical product)
Main Functions	Table support, height adjustment depending on model
Maintenance and Cleaning	Clean with a damp cloth and mild detergent. Dry immediately.
Safety	Do not exceed 227 kg (500 lb). Installation recommended by 2 people. Use safety glasses during assembly. Do not let children play with it.
Spare Parts and Repairability	Screws and floor pads are replaceable. For other parts, contact Vevor support.
Warranty	Electronic warranty via www.vevor.com/support

Frequently Asked Questions - T10569 Vevor

What models are available for the T10569?

The available models are T10569-16 (height 16 inches / 406.4 mm), T10569-19 (19 inches / 482.6 mm) and T10569-28 (28 inches / 711.2 mm).

What is the maximum load supported by these table legs?

The maximum load is 500 lb (227 kg) for the set of 4 legs.

How to assemble the table legs?

Follow the instructions in the manual. It is recommended to assemble the legs with 2 people. Use the provided screws and rubber floor pads. Tighten all screws properly, but without excessive force.

Can I use these legs for a heavy work table?

Yes, if the total weight does not exceed 227 kg. Make sure the table surface is suitable and the legs are securely attached.

Are the legs height adjustable?

No, each model has a fixed height: choose T10569-16, T10569-19 or T10569-28 according to your needs.

What tools are needed for assembly?

You will need a Phillips screwdriver for the screws. A spirit level may also be useful to check levelness.

How to maintain the table legs?

Clean regularly with a damp cloth and mild detergent. Dry immediately to prevent rust. Avoid abrasive cleaners.

What to do if a screw or pad is lost?

Contact Vevor customer service via www.vevor.com/support to obtain replacement parts. Reference model T10569.

Are these legs compatible with all table tops?

They are suitable for most standard tops. Ensure that the mounting points correspond to the leg holes. The table top size depends on your needs, but the load must be evenly distributed.

Is there a warranty on this product?

Yes, you get an electronic warranty. Register your product on www.vevor.com/support for more information.

USER MANUAL T10569 Vevor

Technical Support and E-Warranty Certificate

www.vevor.com/support

TABLE LEGS

MODEL: T10569

We continue to be committed to providing you with tools at competitive prices. "Save Half", "Half Price", or any other similar expressions used by it represent an estimate of savings you might benefit from buying certain products with us compared to the major top brands and do not necessarily cover all categories of tools offered by us.

You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.

MODEL: T10569

NEED HELP? CONTACT US!

Have product questions? Need technical support?

Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we will not notify you again if there are any technology or software updates for the product.

SAFE INSTRUCTIONS

CAUTION: Carefully read instructions and procedures for safe operations. Failure to do so can result in injury.

WARNING:

1. Before using the table legs, ensure that the table is securely installed to prevent personal injury and accidents.
2. When using the table legs, do not overload the handrail to avoid personal injury or accident.
3. Do not draw, cut, or use sharp objects on the legs to avoid damage.
4. If you need to disassemble the table legs, please follow the reverse steps to disassemble and store it properly.
5. This product is not a toy. Do not allow children with this item.

ASSEMBLY PRECAUTIONS

1. Assemble only according to these instructions. Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Keep the assembly area clean and well-lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or under the influence of alcohol, drugs, or medication.
6. Product capabilities apply to properly and completely assembled products only.
7. For additional information regarding the parts listed on the following pages, please refer to the Assembly Diagram of this manual. Unwrap and separate all parts in a clean work area.
8. For safety reasons, this hardware is recommended to be installed by 2 people.

SAVE THESE INSTRUCTIONS

Model	T10569-16	T10569-19	T10569-28
Height (inch/mm)	16 / 406.4	19 / 482.6	28 / 711.2
Number Of Legs(pcs)	4
Maximum Bearing Capacity (Ibs/kg)	500 / 227
Colour	Black

COMPONENTS

No.	Name	QTY.
A	Legs	4
B	Screws	22
C	Rubber Foot Mat	4

Manufacturer:

Shanghai Muxin Muye Youxian Gongsi

Address: Shuangchenglu

803, Nong 11, Hao 1602A-1609 Shi, Baoshan Qu,

Shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKE STREET, EASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

E-CrossStu GmbH

Mainzer Landstr. 69, 60329 Frankfurt am Main.

YH CONSULTING LIMITED.

E-CrossStu GmbH

Mainzer Landstr. 69, 60329

Frankfurt am Main.

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited

Office 147, Centurion

House, London Road,

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

TABLE LEGS

MODEL: T10569

NEED HELP? CONTACT US!

250, 9166 Anaheim Place, Rancho Cucamonga, California 91730

E-CrossStu GmbH

Mainzer Landstr. 69, 60329

C/O YH Consulting Limited

Office 147, Centurion

Staines-upon-Thames,

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

TABLE LEGS

MODEL: T10569

www.vevor.com/support

250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

C/O YH Consulting Limited

Office 147, Centurion

House, London Road,

Staines-upon-Thames,

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

TABLE LEGS

MODEL: T10569

NO.	Nome	QTY.
UN	Gambe	4
B	Viti	22
C	Tappetino in gomma	4

Manufacturer:

Shanghaimuxinmuyeyouxiangongsi

Imported in AUS: SIHAO PTY LTD. 1 ROKEVA

STREET ASTWOOD NSW 2122 Australia

250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

C/O YH Consulting Limited

www.vevor.com/support

TABLE LEGS

MODEL: T10569

STREETESTWOOD NSW 2122 Australia

250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

REPRESENTANTE CE

E-CrossStu GmbH

C/O YH Consulting Limited

Staines-upon-Thames,

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

TABLE LEGS

MODEL: T10569

NEED HELP? CONTACT US!

STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite

250, 9166 Anaheim Place, Rancho Cucamonga, California 91730

Przedstawiciel UE

E-CrossStu GmbH

Mainzer Landstr.69, 60329

Frankfurt am Main.

YH CONSULTING LIMITED.

C/O YH Consulting Limited

Office 147, Centurion

House, London Road,

Staines-upon-Thames,

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

TABLE LEGS

MODEL: T10569

NEED HELP? CONTACT US!

250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

E-CrossStu GmbH

Mainzer Landstr.69, 60329

C/O YH Consulting Limited

Kantoor 147, Centurion

Huis, London Road,

Staines-upon-Thames,

VEVOR®

TOUGH TOOLS, HALF PRICE

garantiecertificaat www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

BORDSBEN

MODELL: T10569

NEED HELP? CONTACT US!

Inga.	Namn	ANTAL.
A	Ben	4
B	Skruvar	22
C	Gummi fotmatta	4

Manufacturer:

Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu

803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA

STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite

250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329

Frankfurt am Main.

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited

Office 147, Centurion

House, London Road,

Staines-upon-Thames,

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support