WK320017-2 - Bathroom accessory Vevor - Free user manual and instructions

Product Type	Tension Pole for Shower Corner Caddy
Model	WK320017-2
Brand	Vevor
Color	Black
Number of Trays	4 Fan-Shaped Layers
Load Capacity per Tray	5.4 kg maximum
Adjustable Height Range	142 to 290 cm (56 to 114 inches)
Net Weight	Approximately 1.5 kg
Main Material	Stainless steel or aluminum with coating
Power	None (mechanical installation)
Installation Type	By tension between floor and ceiling, no drilling
Main Functions	Storage of shower products (shampoo, shower gel, etc.) in a corner
Maintenance and Cleaning	Clean with a soft cloth and soapy water. Avoid abrasive cleaners.
Safety	Do not exceed 5.4 kg per tray. Check ceiling stability (must be hard).
Spare Parts and Repairability	Contact Vevor support for spare parts. Electronic warranty available.
Package Contents	Poles (5x 490mm, 1x 480mm), adjustable rod, springs, trays, mounting accessories
General Information	Manufactured by Shanghai Muxin Muye Co., Ltd. Imported by SIHAO PTY LTD (AU) and Sanven Technology Ltd (US).

Frequently Asked Questions - WK320017-2 Vevor

How to install the Vevor WK320017-2 shower corner caddy?

Installation is done by tension between the floor and ceiling. Adjust the height by adding or removing sections of pole A, then adjust the C rod to compress the spring by 50 to 80 mm. Make sure the ceiling is hard (no looped aluminum ceiling).

What is the maximum weight each tray can support?

Each tray can support up to 5.4 kg. Do not exceed this limit to avoid any risk of falling.

Does the caddy fit all types of ceilings?

No, it requires a hard ceiling (concrete, wood, etc.). Aluminum loop ceilings or other non-solid surfaces will not allow safe installation.

What materials are used?

The pole is stainless steel or aluminum with coating. The trays are metal with a black finish for the WK320017-2 model.

How to clean the caddy?

Use a soft cloth and soapy water. Avoid abrasive or harsh chemical cleaners that could damage the coating.

Can I use the caddy without drilling holes?

Yes, the spring tension system allows a no-drilling installation between the floor and ceiling.

Is the caddy adjustable in height?

Yes, the height is adjustable from 142 to 290 cm (56 to 114 inches) by changing the number of pole sections and adjusting the compression rod.

What if the caddy does not hold firmly in place?

Check that the ceiling is hard and the spring is compressed at least 50 mm. If necessary, adjust the C rod. If the problem persists, contact Vevor support.

Is the caddy delivered with all necessary accessories?

Yes, the package contains the poles, adjustable rod, springs, 4 fan-shaped trays, and mounting parts. No additional tools are required.

Where can I get spare parts or technical support?

Visit www.vevor.com/support for technical support and electronic warranty certificate.

USER MANUAL WK320017-2 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

SHOWER CORNER CADDY TENSION POLE

MODEL: WK320017/WK320017-1/WK320017-2

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent of savings you might benefit from buying certain tools with us compared top brands and does not necessarily mean to cover all categories of tools offered are kindly reminded to verify carefully when you are placing an order with us actually saving half in comparison with the top major brands.

MODEL: WK320017/WK320017-1/WK320017-2

Pure line drawing of three vertical panels with curved internal structures, no text or symbols present

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel fr contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instruction carefully before operating. VEVOR reserves a clear interpretation user manual. The appearance of the product shall be subject to product you received. Please forgive us that we won't inform you there are any technology or software updates on our product.

Warning-To reduce the risk of injury, the user must rea instructions manual carefully.

WARNING

• The product is fixed in front of the ground and ceiling by the built-in spring structure. Before use, confirm that the installation position is a hard ceiling. F non-hard ceilings (such as aluminum buckle ceilings), the product may not be to be installed and used properly.
• Fan shaped and square trays (excluding soap holders), the weight of items placed on a single tray must not exceed 5.4kg.

PRODUCTION CONFIGURATION

Model	WK320017-1	WK320017-2	WK320017
Height range (in)	56-114
Single tray load-bearing capacity (kg)	5.4
Tray	4 layers, fan-shaped
Colour	Bronze	Silvery	Black

PARTS LIST

A=5x L=490mm

B=1x L=480mm

C=1xC=1xD=2x

D=2x

E=1xE=1xF=1x

F=1x

Height adjustment instructions

1. Coarse adjustment: The user confirms the installation position, the distance between the ceiling and the ground, and adapts by increasing decreasing the number A pole.
2. By adjusting the length of the C rod inserted into the B rod, ens the spring compression is approximately 50-80mm.

Rotate the C-rod in the direction shown in the diagram to loosen it, to the appropriate length, and then rotate it in the opposite direction tighten the C-rod.

Overall installation

Complete installation

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW : Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Pure line drawing of three identical mechanical components arranged vertically (no text or symbols)

BESOIN D'AIDE? CONTACTEZ-NOUS!

C/O YH Consulting Limited Bureau 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

Pure line drawing of three identical mechanical components arranged vertically (no text or symbols)

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Pure line drawing of three identical mechanical components arranged vertically (no text or symbols)

HO BISOGNO DI AIUTO? CONTATTACI!

Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

REP.CE

E-CrossStu GmbH

Mainzer Landstr.69,

elettronica www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Pure line drawing of three identical mechanical components arranged vertically (no text or symbols)

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

Pure line drawing of three identical mechanical components arranged vertically (no text or symbols)

POTRZEBUJE POMOCY? SKONTAKTUJ SIĘ Z NAMI!

KONFIGURACJA PRODUKCYJNA

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

REPREZENT KE

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt nad Menem.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technische ondersteuning en e-garantiecertificaat www.vevor.com/support

DOUCHE HOEK CADDY SPANNINGSPEEL

MODEL: WK320017/WK320017-1/WK320017-2

Pure line drawing of three identical mechanical components arranged vertically (no text or symbols)

HULP NODIG? NEEM CONTACT MET ONS OP!

PRODUCTIECONFIGURATIE

INSTALLATIE INSTRUCTIES

graph TD
    A["①"] --> B["②"]
    B --> C["③"]
    C --> D["④"]
    D --> E["⑤"]
    E --> F["⑥"]
    F --> G["⑦"]
    G --> H["⑧"]
    H --> I["⑨"]
    I --> J["⑩"]
    J --> K["⑪"]
    K --> L["⑫"]
    L --> M["⑫"]
    M --> N["⑫"]

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

garantiecertificaat www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Pure line drawing of three identical mechanical components arranged vertically (no text or symbols)

BEHÖVS HJÄLP? KONTAKTA OSS!

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support