WK320018-1 - Bathroom accessory Vevor - Free user manual and instructions

Find the device manual for free WK320018-1 Vevor in PDF.

Vevor WK320018-1 - Bathroom accessory
📄 64 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Vevor WK320018-1 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypeCorner shower caddy with tension pole
BrandVevor
ModelWK320017 / WK320017-1 / WK320017-2
Number of shelves4 fan-shaped shelves
Load capacity per shelf5.4 kg
Adjustable height range142 - 290 cm (56 - 114 inches)
Available colorsBronze, Silver, Black
MaterialStainless steel or alloy (not specified)
Installation typeTension pole between floor and ceiling, no drilling
Height adjustmentCoarse by adding/removing tubes, fine by threaded rod
Power supplyNone (mechanical accessory)
Maintenance and cleaningWipe with a damp cloth; avoid abrasive products
SafetyDo not exceed 5.4 kg per shelf; hard ceiling required
Spare partsExtension tubes, threaded rod, springs (not listed separately)
RepairabilityDisassembly possible for part replacement
WarrantyElectronic warranty certificate via www.vevor.com/support

Frequently Asked Questions - WK320018-1 Vevor

How to install the Vevor corner shower caddy?
Installation is done by positioning the pole between the floor and a hard ceiling. First adjust the height roughly by adding or removing tubes (A), then fine-tune with the threaded rod (C) to compress the spring 50 to 80 mm. Screw to lock.
What is the maximum weight per shelf?
Each shelf can hold up to 5.4 kg. It is recommended not to exceed this load to avoid any risk of falling.
Can I install this caddy on a plaster or false ceiling?
No, the ceiling must be hard (concrete, solid wood). Aluminum loop or plaster ceilings are not suitable, as the spring could damage them.
What are the product dimensions?
The adjustable height is 142 to 290 cm (56 to 114 inches). The shelves are fan-shaped; the exact width is not specified but fits standard shower corners.
Is the product delivered with screws or wall plugs?
No, installation is based on a tension pole without drilling. No screws or wall plugs are needed. Only the tubes and threaded rod are provided.
How to clean the caddy?
Use a soft damp cloth and dry immediately. Avoid abrasive or acidic cleaners that could scratch the surface.
Can I add additional shelves?
The standard model is designed for 4 shelves. It is not designed to add more, but you can buy another caddy if needed.
Are the shelves individually height-adjustable?
No, the shelves are fixed on the pole. Only the overall pole height is adjustable. You can reposition them by disassembling the caddy.
What to do if the caddy does not hold well?
Check that the ceiling is hard and that the spring is compressed 50 to 80 mm. If the pole slips, adjust the threaded rod to increase tension.
How to contact Vevor technical support?
Visit www.vevor.com/support to get the electronic warranty certificate and technical assistance.

User questions about WK320018-1 Vevor

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

Your email remains private: it is only used to notify you if someone answers your question.

No questions yet. Be the first to ask one.

Download the instructions for your Bathroom accessory in PDF format for free! Find your manual WK320018-1 - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WK320018-1 by Vevor.

USER MANUAL WK320018-1 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

SHOWER CORNER CADDY TENSION POLE

MODEL: WK320017/WK320017-1/WK320017-2

We continue to be committed to providing you with tools at competitive prices. "Save Half", "Half Price", or any other similar expressions used by us only represent the savings you might benefit from buying certain tools with us compared to top brands and do not necessarily mean to cover all categories of tools offered. We kindly remind you to verify carefully when placing an order with us whether you are actually saving half in comparison with the top major brands.

MODEL: WK320017/WK320017-1/WK320017-2

Pure line drawing of three vertical panels with curved internal structures, no text or symbols present.

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of any technology or software updates on our product.

Vevor WK320018-1 - NEED HELP? CONTACT US! - 1

Warning - To reduce the risk of injury, the user must read the instructions manual carefully.

WARNING

  • The product is fixed in front of the ground and ceiling by the built-in spring structure. Before use, confirm that the installation position is a hard ceiling. For non-hard ceilings (such as aluminum buckle ceilings), the product may not be installed and used properly.
  • Fan-shaped and square trays (excluding soap holders), the weight of items placed on a single tray must not exceed 5.4kg.

PRODUCTION CONFIGURATION

ModelWK320017-1WK320017-2WK320017
Height range (in)56-114
Single tray load-bearing capacity (kg)5.4
Tray4 layers, fan-shaped
ColourBronzeSilveryBlack

PARTS LIST

Vevor WK320018-1 - WARNING - 1A=5x L=490mmVevor WK320018-1 - WARNING - 2B=1x L=480mmVevor WK320018-1 - WARNING - 3C=1xC=1xD=2xVevor WK320018-1 - WARNING - 4D=2xVevor WK320018-1 - WARNING - 5E=1xE=1xF=1xVevor WK320018-1 - WARNING - 6F=1x

Height adjustment instructions

  1. Coarse adjustment: The user confirms the installation position, the distance between the ceiling and the ground, and adapts by increasing or decreasing the number of A poles.
  2. By adjusting the length of the C rod inserted into the B rod, ensure the spring compression is approximately 50-80mm.

Rotate the C-rod in the direction shown in the diagram to loosen it, adjust to the appropriate length, and then rotate it in the opposite direction to tighten the C-rod.

C B C C

Overall installation

C

Complete installation

Manufacturer: Shanghai Muxin Muye Youxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, Baoshanqu, Shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW : Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UKREP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

ECREP

E-CrossStu GmbH

Mainzer Landstr. 69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

REPRÉSENTANT CE

E-CrossStu GmbH

Mainzer Landstr. 69,

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

Vevor WK320018-1 - NEED HELP? CONTACT US! - 1

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

Imported into AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

REP.CE

E-CrossStu GmbH

Mainzer Landstr.69,

electronics www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

EC REPRESENTATIVE

E-CrossStu GmbH

Mainzer Landstr.69,

NEED HELP? CONTACT US!

PRODUCTION CONFIGURATION

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

REPREZENT KE

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical support and e-warranty certificate www.vevor.com/support

SHOWER CORNER CADDY TENSION POLE

MODEL: WK320017/WK320017-1/WK320017-2

NEED HELP? CONTACT US!

PRODUCT CONFIGURATION

INSTALLATION INSTRUCTIONSgraph TD A["①"] --> B["②"] B --> C["③"] C --> D["④"] D --> E["⑤"] E --> F["⑥"] G["⑦"] --> H["⑧"] H --> I["⑨"] I --> J["⑩"] J --> K["⑪"] K --> L["⑫"] M["Pre geinstalleerd"] --> N["⑧"] N --> O["⑨"] O --> P["⑩"] P --> Q["⑪"] Q --> R["⑫"]

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

EG REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

Warranty certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

ECREP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Vevor

Model : WK320018-1

Category : Bathroom accessory