ZY-40X6-3Black - DIY tool Vevor - Free user manual and instructions

Product Type	Metal garden edging
Brand	Vevor
Model	ZY-40X6-3Black (and variants)
Material	Galvanized steel
Color	Black
Dimensions of one edging	40 x 6 inches (models 40X6) / 40 x 8 inches (40X8) / 40 x 12 inches (40X12)
Number of edgings included	3, 4 or 6 depending on model
Connectors included	5, 6 or 8 depending on model
Gloves included	Yes, 1 pair (models 40X6-3, 40X6-4); 6 pairs (others)
Required tools	Spade, hammer, wood block
Intended use	Delineating garden borders, paths, lawns
Assembly instructions	Bend if needed, insert into ground, hammer with a mallet on a wood block
Safety precautions	Wear safety goggles and gloves; assemble on a flat surface; do not use under influence
Maintenance	Clean with a damp cloth; avoid abrasive products
Repairability	Edgings can be replaced individually; connectors are standard
Warranty	Electronic warranty certificate available at vevor.com/support

Frequently Asked Questions - ZY-40X6-3Black Vevor

How to install Vevor metal edging?

Mark a line, remove obstacles. If the ground is hard, use a pick. Bend the edging to the desired angle using a workbench or board. Insert the connected edgings into the ground and drive them in with a hammer while placing a wood block on the edge to avoid damage.

What tools are needed?

A spade, a hammer, and a wood block. For stony ground, a pick may be useful.

Can I cut the edging to the desired length?

It is not recommended to cut the edging with any tool, as it could cause injury. The edging is designed to be used in standard sections.

Is the edging rust-resistant?

Yes, it is made of galvanized steel, which provides good corrosion resistance. Regular maintenance (cleaning) extends its lifespan.

What are the exact dimensions?

The 40X6 models measure 40 x 6 inches, the 40X8 measure 40 x 8 inches, and the 40X12 measures 40 x 12 inches. The thickness is not specified but corresponds to standard steel sheet.

How many edgings are supplied?

It depends on the model: ZY-40X6-3 contains 3 edgings, ZY-40X6-4 contains 4, ZY-40X6-6 contains 6. The 40X8 and 40X12 models follow the same logic (3, 4 or 6).

Are the supplied gloves of good quality?

The included gloves are sturdy work gloves, suitable for assembly and installation. For intensive use, we recommend using your own gloves.

How to maintain the edging?

Simply clean it with a damp cloth to remove dirt. Avoid abrasive cleaners that could scratch the black finish.

Can I reuse the edging if I move it?

Yes, the edgings are reusable. Remove them gently from the ground by pulling straight to avoid deforming them.

Where to find after-sales service?

For any technical questions or warranty claims, go to www.vevor.com/support. You will find technical support and the electronic warranty certificate.

USER MANUAL ZY-40X6-3Black Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

GALVANIZED STEEL METAL EDGING

USER MANUAL

MODEL: ZY-40X6-3Black / ZY-40X6-4Black / ZY-40X6-6Black / ZY-40X8-3Black / ZY-40X8-4Black / ZY-40X8-6Black / ZY-40X12-4Black

Model: ZY-40X6-3Black / ZY-40X6-4Black / ZY-40X6-6Black / ZY-40X8-3Black / ZY-40X8-4Black / ZY-40X8-6Black / ZY-40X12-4Black

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact Technical Support and E-Warranty Certificate at www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.

WARNING:

Read this material before using this product. Failure to do so can result in serious injury.

Assembly precautions

1. Assemble only according to these instructions. Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Keep the assembly area clean and well-lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble if tired or when under the influence of alcohol, or medication.
6. The product capabilities apply to properly and completely assembled products only.
7. Assemble on a flat, level, hard and smooth surface capable of supporting the Wooden Hall Tree.
8. For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unpack and separate all parts in a clean work area.

SAVE THIS MANUAL

PRODUCT SPECIFICATIONS

Model	ZY-40X6-3Black
Size of Single metal edge	40*6in
Color	Black

Model	ZY-40X6-4Black
Size of Single metal edge	40*6in
Color	Black

Model	ZY-40X6-6Black
Size of Single metal edge	40*6in
Color	Black

Model	ZY-40X8-3Black
Size of Single metal edge	40*8in
Color	Black

Model	ZY-40X8-4Black
Size of Single metal edge	40*8in
Color	Black

Model	ZY-40X8-6Black
Size of Single metal edge	40*8in
Color	Black

Model	ZY-40X12-4Black
Size of Single metal edge	40*12in
Color	Black

PRODUCT COMPONENTS

Model
	Metal edge	Connector	Gloves
ZY-40X6-3Black	x3	x5	X1
ZY-40X6-4Black	x4	x6
ZY-40X6-6Black	x6	x8
ZY-40X8-3Black	x3	x5
ZY-40X8-4Black	x4	x6
ZY-40X8-6Black	x6	x8
ZY-40X12-4Black	x4	x6
ZY-40X6-3Black / ZY-40X6-4Black / ZY-40X6-6Black
ZY-40X8-3Black / ZY-40X8-4Black / ZY-40X8-6Black
ZY-40X12-4Black

REQUIRED TOOLS

Spade
Hammer and a block of wo

PRODUCT ASSEMBLY INSTRUCTIONS

STEP 1: Prepare a line for the edging to follow and remove any obstructions. If ground is stony, loosen with pickaxe.

STEP 2: Bending instructions: A work bench, the edge of a table, or other former is advised when bending the metal edge to required shape.

NOTE: Do not cut with anything as it can cause injury.

STEP 3: Insert the connected metal edges into the ground and set with a hammer.

NOTE: Place a piece of wood over the metal edge when striking hammer to avoid damaging the metal edge.

CLEAR ENGRAVED GRADUATIONS

Precision control of rotation degree

Manufacturer: Shanghai Uxin Muye Youxiangongsi

Address: Shuangchenglu 803 nong 11 hao 1602A-1609 shi, Baoshan Qu,

Shanghai 200000 CN.

EC REP: E-CrossStu GmbH.

Mainzer Landstr. 69, 60329 Frankfurt am Main.

UK REP: YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

Imported to AUS: SIHAO PTY LTD.

1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd.

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR

TOUGH TOOLS, HALF PRICE

Precision control of rotation degree

Manufacturer: Shanghai Xinmu Ye You Xiang Gong Si

Address: Shuangcheng Road 803, Lane 11, Room 1602A-1609, Baoshan District,

Shanghai 200000 CN.

EC REP: E-CrossStu GmbH.

Mainzer Landstr. 69, 60329 Frankfurt am Main.

UK REP: YH CONSULTING LIMITED.

C/O YH Consulting Limited, Office 147, Centurion House, London Road, Staines

upon-Thames, Surrey, TW18 4AX

Imported to AUS: SIHAO PTY LTD.

1 Rokeva Street, Eastwood NSW 2122, Australia

Imported from USA: Sanven Technology Ltd.

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR

TOUGH TOOLS, HALF PRICE

Precision control of rotation degree

Producer: Shanghai Xinmu Youxian Gongsi

Address: Shuangcheng Road 803 Nong 11 Hao 1602A-1609 Shi, Baoshan District,

Shanghai 20000 CN.

EC REP: E-Cross Stu GmbH.

Mainzer Landstr. 69, 60329 Frankfurt am Main.

UK REP: YH CONSULTING LIMITED.

C/O YH Consulting Limited, Office 147, Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

Imported in AUS: SIHAO PTY LTD.

1 ROKEVA STREET, WOODNSW 2122, Australia

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR

TOUGH TOOLS, HALF PRICE

Precision control of rotation degree

Manufacturer: Shanghaiuxinmuyeyouxianggsi Address: Shuangchenglu 803 nong 11 hao 1602A-1609 shi, Baoshanqu, Shanghai 200000 CN. ECREP: E-CrossStu GmbH. Mainzer Landstr. 69, 60329 Frankfurt am Main. CZECH REPUBLIC: YH CONSULTING LIMITED. Office of C/O YH Consulting Limited, 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX. Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia. Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR

TOUGH TOOLS, HALF PRICE

Technical support and electronic warranty certificate www.vevor.com/support

VEVOR

TOUGH TOOLS, HALF PRICE

Precision control of rotation degree

Manufacturer: Shanghaiuxinmuyeyouxiangongsi

Address: Shuangchenglu 803 nong 11 hao 1602A-1609 shi, Baoshanqu,

Shanghai 200000 CN.

ECREP: E-CrossStu GmbH.

Mainzer Landstr. 69, 60329 Frankfurt am Main.

UK REP: YH CONSULTING LIMITED.

C/O YH Consulting Limited, Office 147, Centurion House, London Road, Staines

upon-Thames, Surrey, TW18 4AX

Imported to AUS: SIHAO PTY LTD.

1 ROKEVA STREET, EASTWOOD NSW 2122, Australia

Imported to USA: Sanven Technology Ltd.

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR

TOUGH TOOLS, HALF PRICE

Precision control of rotation degree

Manufacturer: Shanghai imuxinmuyeyouxianggsi

Address: Shuangchenglu 803 nong 11 hao 1602A-1609 shi, Baoshan Qu,

Shanghai 200000 CN.

EC REP: E-CrossStu GmbH.

Mainzer Landstr. 69, 60329 Frankfurt am Main.

UK REP: YH CONSULTING LIMITED.

C/O YH Consulting Limited, Kantoor 147, Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

1 Rokeva Street, Eastwood NSW 2122, Australia

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR

TOUGH TOOLS, HALF PRICE

Warranty certificate www.vevor.com/support

VEVOR

TOUGH TOOLS, HALF PRICE

Technical support and electronic warranty certificate www.vevor.com/support

GALVANIZED STEEL METAL EDGING

USER MANUAL

MODEL: ZY-40X6-3 Black / ZY-40X6-4 Black / ZY-40X6-6 Black / ZY-40X8-3 Black / ZY-40X8-4 Black / ZY-40X8-6 Black / ZY-40X12-4 Black

PRODUCT CHARACTERISTICS

PRODUCT ASSEMBLY INSTRUCTIONS

Precision control of rotation degree

Manufacturer: Shanghaiuxinmuyeyouxianggsi

Address: Shuangchenglu 803 nong 11 hao 1602A-1609 shi, Baoshanqu,

Shanghai 200000 CN.

EC REP: E-CrossStuGmbH.

Mainzer Landstr. 69, 60329 Frankfurt am Main.

UK REP: YH CONSULTING LIMITED.

C/O YH Consulting Limited Bureau 147, Centurion House, London Road, Staines-upon-

Thames, Surrey, TW18 4AX

1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR

TOUGH TOOLS, HALF PRICE

Technical support and electronic warranty certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Precision control of rotation degree

Manufacturer: Shanghaiuxinmuyeyouxianggsi

Address: Shuangchenglu803nong11hao1602A-1609shi, baoshanqu, shanghai200000CN.

ECREP: E-CrossStuGmbH.

MainzerLandstr.69,60329FrankfurtamMain.

UKREP:YHCONSULTINGLIMITED.

C/OYHConsultingLimitedOffice147,CenturionHouse,LondonRoad, Stainesupon-Thames,Surrey,TW184AX

Suite250,9166AnaheimPlace,RanchoCucamonga,CA91730

VEVOR

TOUGH TOOLS, HALF PRICE