T6713-28 - Table leg Vevor - Free user manual and instructions

Product Type	Table Leg
Brand	Vevor
Model	T6713-28
Height	711.2 mm (28 inches)
Number of Legs	4
Maximum Load Capacity	408.6 kg (900 lb)
Color	Black
Main Material	Steel
Included Components	4 legs, 22 screws, 4 rubber floor mats
Assembly	2-person assembly recommended
Recommended Use	Work table, workbench, countertop
Safety	Read instructions before use, do not overload, assemble correctly
Maintenance	Clean with a soft, dry cloth
Environment	Indoor use
Warranty	Electronic warranty via www.vevor.com/support
Technical Support	www.vevor.com/support
Repairability	Spare parts available upon request
Country of Origin	China

Frequently Asked Questions - T6713-28 Vevor

How to install the Vevor T6713-28 table legs?

For installation, follow the provided instructions. Assemble the 4 legs with the included 22 screws. Attach the rubber floor mats under each leg. It is recommended to have 2 people for assembly. Tighten the screws without forcing.

What is the maximum load capacity of this table leg?

The maximum load capacity is 408.6 kg (900 lb) for the set of 4 legs. Never exceed this limit to avoid accidents.

Is this table leg height adjustable?

No, the T6713-28 model has a fixed height of 711.2 mm (28 inches). It is not adjustable.

What material are the table legs made of?

The table legs are made of high-quality steel, ensuring good stability and durability. The color is black.

How to maintain the Vevor table legs?

Clean regularly with a soft, dry cloth to remove dust. Avoid abrasive products or excessive water that could damage the finish.

What safety precautions should be taken?

Read the instructions carefully before use. Make sure the legs are securely installed to prevent injury. Do not overload the table, do not use sharp objects on the legs, and do not let children play with this product.

Can I use this table leg outdoors?

This product is designed for indoor use. Prolonged outdoor exposure could lead to rust or damage.

Where can I find spare parts?

For spare parts, contact customer service via www.vevor.com/support. Parts such as screws or floor mats can be ordered.

What is the warranty on this product?

Vevor offers an electronic warranty. For more details and to register your product, visit www.vevor.com/support.

How many screws are provided with the kit?

The kit includes 22 screws to attach the legs. Check that all screws are present before starting assembly.

USER MANUAL T6713-28 Vevor

Technical Support and E-Warranty Certificate

www.vevor.com/support

TABLE LEGS

MODEL: T6713-28

We continue to be committed to providing you with tools at competitive prices. "Save Half", "Half Price", or any other similar expressions used by us represent an estimate of savings you might benefit from buying certain products with us compared to the major top brands, and do not necessarily cover all categories of tools offered by us.

You are kindly reminded to verify carefully when placing an order with us if you are actually saving half in comparison with the top major brands.

MODEL: T6713-28

NEED HELP? CONTACT US!

Have product questions? Need technical support?

Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we will not notify you again if there are any technology or software updates for the product.

SAFE INSTRUCTIONS

CAUTION: Carefully read instructions and procedures for safe operations. Failure to do so can result in injury.

WARNING:

1. Before using the table legs, ensure that the table is securely installed to prevent personal injury and accidents.
2. When using the table legs, do not overload the handrail to avoid personal injury or accident.
3. Do not draw, cut, or use sharp objects on the legs to avoid damage.
4. If you need to disassemble the table legs, please follow the reverse steps to disassemble and store it properly.
5. This product is not a toy. Do not allow children with this item.

ASSEMBLY PRECAUTIONS

1. Assemble only according to these instructions. Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Keep the assembly area clean and well-lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or under the influence of alcohol, drugs, or medication.
6. Product capabilities apply to properly and completely assembled products only.
7. For additional information regarding the parts listed on the following pages, please refer to the Assembly Diagram of this manual. Unwrap and separate all parts in a clean work area.
8. For safety reasons, this hardware is recommended to be installed by 2 people.

SAVE THESE INSTRUCTIONS

Model	T6713-28
Height(inch/mm)	28 / 711.2
Number Of Legs(pcs)	4
Maximum Bearing Capacity (Ibs/kg)	900 / 408.6
Colour	Black

COMPONENTS

No.	Name	QTY.
A	Legs	4
B	Screws	22
C	Rubber Foot Mat	4

Manufacturer:

Shanghai Muxin Muye Youxian Gongsi

Address: Shuangchenglu

803 Nong 11 Hao 1602A-1609 Shi, Baoshan Qu,

Shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKE STREET, EASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

E-CrossStu GmbH

Mainzer Landstr. 69, 60329 Frankfurt am Main.

YH CONSULTING LIMITED.

EC

REP

UK

REP

E-CrossStu GmbH

Mainzer Landstr. 69, 60329

Frankfurt am Main.

YH CONSULTING LIMITED.

C/O YH Consulting Limited

Office 147, Centurion

House, London Road,

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

TABLE LEGS

MODEL: T6713-28

NEED HELP? CONTACT US!

250, 9166 Anaheim Place, Rancho Cucamonga, California 91730

E-CrossStu GmbH

Mainzer Landstr. 69, 60329

C/O YH Consulting Limited

Office 147, Centurion

Staines-upon-Thames,

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

TABLE LEGS

MODEL: T6713-28

www.vevor.com/support

250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

Vertreter der EG

UK

REP

E-CrossStu GmbH

Mainzer Landstr. 69, 60329

Frankfurt am Main.

YH CONSULTING LIMITED.

C/O YH Consulting Limited

Büro 147, Centurion

Haus, London Road,

Staines-upon-Thames,

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

GAMBE DEL TAVOLO

MODELLO: T6713-28

Importato in AUS: SIHAO PTY LTD. 1 ROKEVA

STREET ASTWOOD NSW 2122 Australia

250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

C/O YH Consulting Limited

www.vevor.com/support

TABLE LEGS

MODEL: T6713-28

STREETESTWOOD NSW 2122 Australia

250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

REPRESENTANTE CE

E-CrossStu GmbH

C/O YH Consulting Limited

Staines-upon-Thames,

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

TABLE LEGS

MODEL: T6713-28

NEED HELP? CONTACT US!

C/O YH Consulting Limited

Office 147, Centurion

House, London Road,

Staines-upon-Thames,

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

TABLE LEGS

MODEL: T6713-28

NEED HELP? CONTACT US!

C/O YH Consulting Limited

Office 147, Centurion

House, London Road,

Staines-upon-Thames,

VEVOR®

TOUGH TOOLS, HALF PRICE

warranty certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

WORKBENCH

MODEL: T6713-28

NEED HELP? CONTACT US!

www.vevor.com/support

250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329

Frankfurt am Main.

YH CONSULTING LIMITED.

C/O YH Consulting Limited

Office 147, Centurion

House, London Road,

Staines-upon-Thames,

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support