JW-XB21212519(T802) - Pets Vevor - Free user manual and instructions

Find the device manual for free JW-XB21212519(T802) Vevor in PDF.

Vevor JW-XB21212519(T802) - Pets
📄 64 pages English EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs
Notice Vevor JW-XB21212519(T802) - page 1
1 / 64
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Pet Carrier with Wheels
Brand Vevor
Model JW-XB21212519(T802)
Dimensions (L × W × H) 425 × 355 × 280 mm
Color Gray
Material Synthetic fabric (unspecified)
Weight Approximately 2.5 kg (estimated)
Load Capacity Up to 10 kg (estimated)
Usage For pets (dogs, cats, etc.)
Closure Self-locking zipper
Wheels Yes, mounted on the base
Care Hand wash, do not bleach, air dry
Safety Keep away from flames, sharp and cutting objects
Assembly Assembly instructions included
Warranty Electronic warranty via www.vevor.com/support
Manual available in French, English, German, Dutch, etc.

Frequently Asked Questions - JW-XB21212519(T802) Vevor

What types of animals can be transported in this pet carrier?
This pet carrier is suitable for dogs, cats and other small domestic pets. Make sure the animal is comfortable and does not exceed the load capacity.
What are the internal dimensions of the pet carrier?
The external dimensions are 425 × 355 × 280 mm. The internal space is slightly smaller, suitable for medium-sized animals.
How to clean the pet carrier?
The pet carrier is hand washable. Use a damp cloth for stains. Do not use bleach, do not machine dry, and do not iron.
Is the pet carrier safe for car transport?
It is designed for walking or outdoor use. For car travel, it is recommended to secure it firmly with a seat belt to prevent movement.
How to assemble the pet carrier?
Follow the assembly instructions provided. Make sure the zipper is properly locked before use.
What is the maximum weight supported?
The manual does not specify an exact limit, but for optimal use, it is advised not to exceed 10 kg.
Can I use this pet carrier for a kitten or puppy?
Yes, it is suitable for young animals. Ensure they are comfortable and supervise them to prevent scratching the fabric.
How to contact Vevor customer service?
Visit www.vevor.com/support for technical support and the electronic warranty certificate.
Is the pet carrier foldable for storage?
It is not specifically stated as foldable, but its flexible structure allows it to be stored flat after use.
Are there any usage precautions?
Yes: keep away from open flames and sharp objects. Do not use as a child's toy. Check the fastening before each use.

User questions about JW-XB21212519(T802) Vevor

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

Your email remains private: it is only used to notify you if someone answers your question.

No questions yet. Be the first to ask one.

Download the instructions for your Pets in PDF format for free! Find your manual JW-XB21212519(T802) - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. JW-XB21212519(T802) by Vevor.

USER MANUAL JW-XB21212519(T802) Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

INSTRUCTION FOR PET CARRIER WITH WHEELS MODEL:JW-XB21212519(T802)

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands

VEVOR®

TOUGH TOOLS, HALF PRICE

PET CARRIER WITH WHEELS

JW-XB21212519(T802)

Black and white photo of a black and gray travel suitcase with wheels and handle (no text or symbols visible)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.

Washing Instructions

  • Do not bleach.
  • Spread out and hang to air to dry.
  • Do not dry it in a dryer.
  • Do not iron.
  • Not machine washable.
  • Hand washable.
  • Clean the surface with a damp cloth.

WARNING

  • Please read this manual carefully before using the product.
  • Flammable: Keep away from open flame. This product will ignite and burn if brought into contact with an open flame.
  • Keep away from sharp points, blades, and other items to avoid scratching the product.
  • This product is not a toy; the pet carrier with wheels cannot be used as a toy for children to play with.
  • Do not use the rolling carrier without safely fastening it to the base.
  • This product uses a self-locking zipper; please do not pull both zippers at the same time.

SAVE THESE INSTRUCTIONS

SPECIFICATIONS

ModelJW-XB21212519(T802)
Product Size425×355×280mm
ColorGray

COMPONENTS

Interior view of a car seat with a black lid and side compartments (no text or symbols visible)

Mechanical component with black housing and metallic handle, labeled '1pc' at bottom (no other text or symbols)

Dark rectangular object with a label '1pc' below it, no other text or symbols visible.

Simple illustration of a circular object with orange interior and black ring, labeled '1pc' at bottom (no other text or symbols)

Four black circular objects arranged horizontally on a white background, labeled '4pcs' below (no other text or symbols)

Assembly Instructions

①Back view of a black athletic backpack with straps and straps (no visible text or symbols)

Close-up of a transparent plastic container with a black arrow pointing to a small rectangular object inside (no visible text or symbols)

②base flat base concave card slot runner

runner (The runner faces the concave surface of the base.) base concave

Lay the lever flat, as shown in the figure: The runner faces the concave surface of the base (be sure to pay attention to this), then press the card slot down hard, and the installation is complete when you hear the sound of "bang". Ensure that the wheels are properly installed to avoid falling out during use.

③Black office chair with wheels and a handle, no visible text or symbols

Top-down view of a black plastic cart with wheels and a close-up inset showing internal components (no text or symbols visible)

④Close-up of a mechanical device with attached clamps and straps (no visible text or symbols)

Black and gray mechanical device with a curved arrow indicating rotation (no text or symbols visible)

⑤Black suitcase with a side panel and handle, shown from front and back angles (no text or symbols visible)

⑥Close-up of a hand adjusting a black backpack cover with a handle (no visible text or symbols)

Close-up of a mechanical device with attached black clasp and belt (no visible text or symbols)

Manufacturer: Shanghai Muxin Muye Youxiangongsi

Address: Shuangcheng Road 803, Nong 11, Hao 1602A-1609 Shi, Baoshan District, Shanghai 200000 CN.

EC REP: E-CrossStu GmbH.

Mainzer Landstr. 69, 60329 Frankfurt am Main.

UK REP: YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

Imported to USA: Sanven Technology Ltd.

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Mechanical component with black housing and metallic handle, labeled '1pc' at bottom (no other text or symbols)

Dark rectangular object with textured surface, labeled '1pc' at bottom (no other text or symbols)

Simple illustration of a circular object with orange interior and black ring, labeled '1pc' at bottom (no other text or symbols)

Four black circular objects arranged horizontally on a white background, labeled '4pcs' below (no other text or symbols)

Assembly Instructions ①Black and white photo of a backpack with straps and straps (no visible text or symbols)

Close-up of a transparent plastic bag with a black arrow pointing to the side (no visible text or symbols)

②Base flat, base concave, card slot, runner

Runner (the runner faces the concave surface of the base), base concave

Lay the lever flat, as shown in the figure: The runner faces the concave surface of the base (be sure to pay attention to this), Then press the card slot down hard, and the installation is complete when you hear the sound of "bang". Ensure that the wheels are properly installed to avoid falling out during use.

Three views of a black industrial machine component, shown from front and side, with a close-up inset highlighting the internal structure (no text or symbols visible)

Two views of a car seatbelt device, one open and one closed, showing mechanical components and a rotation arrow (no text or symbols)

Black suitcase with a guide case pointing to it, no text or symbols visible

Two-step photo showing a hand adjusting a seatbelt, with no visible text or symbols.

Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address:

Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200000 CN.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX. Imported into the USA:

Sanven Technology Ltd.

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

Mechanical component with black housing and metallic handle, labeled '1pc' at bottom (no other text or symbols).

Dark rectangular object with engraved markings, labeled '1pc' below (no other text or symbols).

Simple illustration of a circular object with orange interior and a red hanging hook, labeled '1pc' at the bottom (no other text or symbols).

Four black circular objects arranged horizontally on a white background, labeled '4pcs' below (no other text or symbols).

Close-up of a dark plastic bag with a small inset showing a black object, no visible text or symbols.

②Base flat, base concave, card slot, runner.

Runner (the runner faces the concave surface of the base), base concave.

Lay the lever flat, as shown in the figure: The runner faces the concave surface of the base (be sure to pay attention to this), Then press the card slot down hard, and the installation is complete when you hear the sound of "bang". Ensure that the wheels are properly installed to avoid falling out during use.

Three views of a black industrial machine component, shown from front and side, with a close-up inset highlighting the internal structure (no text or symbols visible).

Two views of a car seatbelt device, one open and one closed, showing mechanical components and a rotation arrow (no text or symbols).

Black suitcase with a guide case and arrow, shown in a simple diagram (no text or symbols).

Two-step photo showing a hand adjusting a seatbelt, with no visible text or symbols.

Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address:

Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX Imported to

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

Mechanical component with black housing and metallic handle, labeled '1pc' at the bottom. No other text or symbols.

Dark rectangular object with textured surface, labeled '1pc' at the bottom. No other text or symbols.

Simple illustration of a circular object with orange interior and black ring, labeled '1pc' at the bottom. No other text or symbols.

Four black circular objects arranged horizontally on a white background, labeled '4pcs' below. No other text or symbols.

Close-up of a transparent plastic bag with a black arrow pointing to the side, no visible text or symbols.

Runner (the runner faces the concave surface of the base), base concave.

Lay the lever flat, as shown in the figure: The runner faces the concave surface of the base (be sure to pay attention to this). Then press the card slot down hard, and the installation is complete when you hear the sound of "bang". Ensure that the wheels are properly installed to avoid falling out during use.

Three views of a black industrial machine component, shown from front and side, with a close-up inset highlighting the internal structure. No text or symbols visible.

Two views of a car seatbelt device, one open and one closed, showing mechanical components and a rotation arrow. No text or symbols.

Black suitcase with a guide case pointing to it, no text or symbols visible.

Two-step photo showing a hand adjusting a seatbelt, with no visible text or symbols.

Manufacturer: Shanghai Muxin Wood Industry Co., Ltd. Address:

Room 1602A-1609, No. 11, Lane 803, Shuangcheng Road, Baoshan District, Shanghai

200000 CN.

EG-REP: E-CrossStu GmbH.

Mainzer Landstr. 69, 60329 Frankfurt am Main.

VK VERTEGENWOORDIGING: YH CONSULTING LIMITED.

C/O YH Consulting Limited, Office 147, Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR®

TOUGH TOOLS, HALF PRICE

Warranty certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

Mechanical component with black housing and metallic handle, labeled '1pc' at bottom (no other text or symbols)

Dark rectangular object with textured surface, labeled '1pc' at bottom (no other text or symbols)

Simple illustration of a circular object with orange interior and a red hanging hook, labeled '1pc' at the bottom (no other text or symbols)

Four black circular objects arranged horizontally on a white background, labeled '4pcs' below (no other text or symbols)

Close-up of a dark plastic bag with a small inset showing a black object, no visible text or symbols.

runner (The runner faces the concave surface of the base.) base concave

Lay the lever flat, as shown in the figure: The runner faces the concave surface of the base (be sure to pay attention to this), Then press the card slot down hard, and the installation is complete when you hear the sound of "bang". Ensure that the wheels are properly installed to avoid falling out during use.

Three views of a black industrial machine component, shown from front and side, with a close-up inset highlighting the internal structure (no text or symbols visible)

Two views of a car seatbelt device, one open and one closed, with no visible text or symbols.

Black suitcase with a guide case pointing to it, no text or symbols visible

Two-step photo showing a hand adjusting a seatbelt, with no visible text or symbols

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu,

shanghai 200000 CN.

EC REP: E-CrossStu GmbH.

Mainzer Landstr.69, 60329 Frankfurt am Main.

UK REP: YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

Imported to USA: Sanven Technology Ltd.

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Mechanical component with black housing and metallic handle, labeled '1pc' at bottom (no other text or symbols)

Dark rectangular object with textured surface, labeled '1pc' at bottom (no other text or symbols)

Simple illustration of a circular object with orange interior and a red hanging hook, labeled '1pc' at the bottom (no other text or symbols)

Four black circular objects arranged horizontally on a white background, labeled '4pcs' below (no other text or symbols)

Close-up of a transparent plastic bag with a black arrow pointing to the side (no visible text or symbols)

②base flat base concave card slot runner

runner (The runner faces the concave surface of the base.) base concave

Lay the lever flat, as shown in the figure: The runner faces the concave surface of the base (be sure to pay attention to this). Then press the card slot down hard, and the installation is complete when you hear the sound of "bang". Ensure that the wheels are properly installed to avoid falling out during use.

Three views of a black industrial machine component, shown from front and side, with a close-up inset highlighting the internal structure (no text or symbols visible)

Two views of a car seatbelt device, one open and one closed, showing mechanical components and a rotation arrow (no text or symbols)

Black suitcase with a guide case and arrow, shown in a simple diagram (no text or symbols)

Two-step photo showing a hand adjusting a seatbelt, with no visible text or symbols

C/O YH Consulting Limited Oficina 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX Importado a

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR®

TOUGH TOOLS, HALF PRICE

Mechanical component with black housing and metallic handle, labeled '1pc' at bottom (no other text or symbols)

Dark rectangular object with textured surface, labeled '1pc' at bottom (no other text or symbols)

Simple illustration of a circular object with orange interior and a red hanging hook, labeled '1pc' (no text or symbols on the object itself)

Four black circular objects arranged horizontally on a white background, labeled '4pcs' below (no other text or symbols)

Close-up of a transparent plastic bag with a black arrow pointing to the side (no visible text or symbols)

②Base flat, base concave, card slot, runner

Runner (The runner faces the concave surface of the base.) Base concave

Lay the lever flat, as shown in the figure: The runner faces the concave surface of the base (be sure to pay attention to this). Then press the card slot down hard, and the installation is complete when you hear the sound of "bang". Ensure that the wheels are properly installed to avoid falling out during use.

Three views of a black industrial machine component, shown from front and side, with a close-up inset highlighting the internal structure (no text or symbols visible)

Two views of a car seatbelt device, one open and one closed, with no visible text or symbols.

Black suitcase with a guide case and arrow, shown in a simple diagram (no text or symbols)

Two-step photo showing a hand adjusting a seatbelt, with no visible text or symbols

C/O YH Consulting Limited Ufficio 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX Importato negli

USA: Sanven Technology Ltd.

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

Mechanical component with black housing and metallic handle, labeled '1pc' at bottom (no other text or symbols)

Dark rectangular object with textured surface, labeled '1pc' at bottom (no other text or symbols)

Simple illustration of a circular object with an orange interior and a red hanging hook, labeled '1pc' at the bottom.

Four black circular objects arranged horizontally on a white background, labeled '4pcs' below.

Installation instructions

①Black and white photo of a backpack with straps.

Close-up of a transparent plastic bag with a black arrow pointing to the side.

②Base flat, base concave, card slot, runner.

Runner (the runner faces the concave surface of the base), base concave.

Lay the lever flat, as shown in the figure: The runner faces the concave surface of the base (be sure to pay attention to this). Then press the card slot down hard, and the installation is complete when you hear the sound of "bang". Ensure that the wheels are properly installed to avoid falling out during use.

Three views of a black industrial machine component, shown from front and side, with a close-up inset highlighting the internal structure.

Two views of a car seatbelt device, one open and one closed, showing mechanical components and a rotation arrow.

Black suitcase with a guide case pointing to it.

Two-step photo showing a hand adjusting a seatbelt.

Manufacturer: Shanghai Muxin Wood Industry Co., Ltd. Address:

Room 1602A-1609, No. 11, Lane 803, Shuangcheng Road, Baoshan District, Shanghai 200000 CN.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-

Thames, Surrey, TW18 4AX Imported into the USA:

Sanven Technology Ltd.

Apartment 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR®

TOUGH TOOLS, HALF PRICE

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Vevor

Model : JW-XB21212519(T802)

Category : Pets