ZY-39X5-5Black - DIY tool Vevor - Free user manual and instructions

Name: ZY-39X5-5Black
Brand: Vevor
Rating: 7 (272 reviews)

Find the device manual for free ZY-39X5-5Black Vevor in PDF.

📄 96 pages

EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs

View the manual :

Pick your language and provide your email: we'll send you a specifically translated version.

This manual is not available in your language

Desired language Your email address

Product Type	Galvanized Steel Metal Edging
Brand	Vevor
Model	ZY-39X5-5Black
Material	Galvanized Steel
Color	Black
Dimensions of Each Piece	39 x 5 inches (99 x 12.7 cm)
Number of Pieces	5
Total Weight	Approximately 2.5 kg (estimate)
Power Type	None (manual tool)
Intended Use	Garden delimitation, lawn borders, pathways
Assembly Method	Interlocking tabs at 45° and flattening
Required Tools	Spade, hammer, wood block, screwdriver
Bendability	Yes, by hand or on a workbench to form curves
Weather Resistance	Yes, thanks to galvanized coating
Maintenance	Clean with a damp cloth; avoid abrasive products
Safety Instructions	Wear gloves and safety glasses during assembly
Replacement Parts	Complete set of 5 pieces provided
Repairability	Not repairable; replace damaged sections
Warranty	Electronic warranty certificate at www.vevor.com/support
Technical Support	www.vevor.com/support

Frequently Asked Questions - ZY-39X5-5Black Vevor

How to install the Vevor ZY-39X5-5Black metal edging?

Prepare an edging line, remove obstacles. Insert two pieces by interlocking the tabs at 45° then flatten them with a screwdriver. Drive the edges into the ground using a hammer and a wood block to avoid damaging the steel.

Can I cut the edging to the desired length?

It is not recommended to cut the edging with sharp tools as this may cause injury and damage the coating. The edging is designed to be used in standard 39-inch sections.

How to connect multiple sections together?

Insert the tab of one section into the hole of the adjacent section at a maximum angle of 45°, then flatten the tab with a screwdriver to lock the assembly.

What tools are needed for installation?

You will need a spade, a hammer, a wood block (to cushion blows), and a screwdriver to flatten the tabs.

Can the edging be bent to follow curves?

Yes, you can bend the metal edging by hand or using a workbench to form angles or curves as needed. Do not bend too sharply to avoid breaking the coating.

How to maintain the edging to prevent rust?

Galvanized steel naturally resists rust. Simply clean with a damp cloth and avoid harsh chemicals. If scratches appear, you can apply rust-proof paint.

Is the edging suitable for bordering walkways or flower beds?

Yes, it is ideal for delimiting lawns, flower beds, walkways, and garden borders. Its height of 5 inches (12.7 cm) provides a clean separation.

What is the actual color of the ZY-39X5-5Black model?

The model is black. There are also gray and brown variants. The black color blends discreetly into the landscape.

Is the edging delivered with a warranty?

Yes, Vevor provides an electronic warranty certificate. You can obtain it and contact technical support via www.vevor.com/support.

What to do if a piece is damaged?

Individual pieces are not repairable. Contact Vevor customer service for a replacement under warranty if the defect is covered. Outside warranty, replace the affected section with a new one.

User questions about ZY-39X5-5Black Vevor

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

No questions yet. Be the first to ask one.

Download the instructions for your DIY tool in PDF format for free! Find your manual ZY-39X5-5Black - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ZY-39X5-5Black by Vevor.

USER MANUAL ZY-39X5-5Black Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

GALVANIZED STEEL METAL EDGING

USER MANUAL

MODEL: ZY-39X3-5Black / ZY-39X3-5Grey / ZY-39X3-5Brown

ZY-39X5-5Black / ZY-39X5-5Grey / ZY-39X5-5Brown

We continue to be committed to providing you with tools at competitive prices.

"Save Half", "Half Price", or any other similar expressions used by us only represent an estimate of savings you might benefit from buying certain tools with us compared to other brands and do not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when placing an order with us if you are actually saving half compared to the top major brands.

Model: ZY-39X3-5Black / ZY-39X3-5Grey / ZY-39X3-5Brown

ZY-39X5-5Black / ZY-39X5-5Grey / ZY-39X5-5Brown

Pure electrical circuit lines without any symbols.

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact Technical Support and E-Warranty Certificate at www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.

WARNING:

Read this material before using this product. Failure to do so can result in serious injury.

Assembly precautions

Assemble only according to these instructions. Improper assembly can create hazards.
Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
Keep the assembly area clean and well-lit.
Keep bystanders out of the area during assembly.
Do not assemble if tired or when under the influence of alcohol, drugs, or medication.
The product capabilities apply to properly and completely assembled products only.
Assemble on a flat, level, hard, and smooth surface capable of supporting the Wooden Hall Tree.
For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap and separate all parts in a clean work area.

SAVE THIS MANUAL

PRODUCT SPECIFICATIONS


Model	ZY-39X3-5Black	ZY-39X3-5Grey	ZY-39X3-5Brown
Color	Black	Grey	Brown
Size of Single metal edge	39*3in
Gloves	X1


Model	ZY-39X4-5Black	ZY-39X4-5Grey	ZY-39X4-5Brown
Color	Black	Grey	Brown
Size of Single metal edge	39*4in
Gloves	X1
39" 5pcs
Model	ZY-39X5-5Black	ZY-39X5-5Grey	ZY-39X5-5Brown
Color	Black	Grey	Brown
Size of Single metal edge	39*5in
Gloves	X1

REQUIRED TOOLS

Spade
Hammer and a block of wo
Screwdriver

PRODUCT ASSEMBLY INSTRUCTIONS

STEP 1: Prepare a line for the edging to follow and remove any obstructions. If the ground is stony, loosen with a pickaxe.

Line drawing of a structural support structure with a hammer and bracket (no text or symbols).

STEP 2: Bending instructions: A workbench, the edge of a table, or other former is advised when bending the metal edge to the required shape.

Technical line drawing showing a mechanical assembly with a bracket and a base plate, no text or symbols present.

Simple line drawing of a saw cutting through a rack with a red X mark above (no text or symbols).

Illustration of a server rack with pins and a green checkmark above it (no text or symbols).

NOTE: Do not cut with anything as it can cause injury.

STEP 3

1. Insert two pieces of the metal edge together;2. Link the metal edge and use a screwdriver to push the tongue front panel through the hole in the rear panel nomorè ;than 453. Finally, flatten the tongue.

Vevor ZY-39X5-5Black - PRODUCT ASSEMBLY INSTRUCTIONS - 5

Vevor ZY-39X5-5Black - PRODUCT ASSEMBLY INSTRUCTIONS - 6

Vevor ZY-39X5-5Black - PRODUCT ASSEMBLY INSTRUCTIONS - 7

Vevor ZY-39X5-5Black - PRODUCT ASSEMBLY INSTRUCTIONS - 8

Vevor ZY-39X5-5Black - PRODUCT ASSEMBLY INSTRUCTIONS - 9

STEP 4: Insert the connected metal edges into the ground and secure with a hammer.

Diagram showing three hand tools (hammers, checkmark, cross) above a grid of pin pins, likely illustrating a safety or inspection concept.

Diagram showing a material cross-section with granular texture and layered structure (no text or symbols).

NOTE: Place a piece of wood over the metal edge when striking with a hammer to avoid damaging the metal edge.

Supplementary statement:The metal barrier can be bent into the you need according to your needs (Including but not limited to th shapes).
1
2
3

CLEAR ENGRAVED GRADUATIONS

Precision control of rotation degree

Garden hedge with green shrubs and a curved black border, labeled 'Circular' in the corner (no other text or symbols).

Exterior view of a modern building with large windows and a potted plant, set on grass (no signage or text).

Other Complex Shapes.

Manufacturer: Shanghai Muxin Muye Youxiangongsi

Address: Shuangchenglu 803 Nong 11 Hao 1602A-1609 Shi, Baoshan Qu, Shanghai 200000 CN.

EC REP: E-CrossStu GmbH.

Mainzer Landstr. 69, 60329 Frankfurt am Main.

UK REP: YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

Imported to AUS: SIHAO PTY LTD.

1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd.

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Simple line drawing of a saw cutting through a rack with a red X symbol above (no text or symbols).

Illustration of a curved ramp with green checkmark above it, no text or symbols present.

Diagram showing a granular material layer on the left and a textured surface with a vertical structure on the right (no text or symbols)

Precision control of rotation degree

Close-up of a curved black metal fence with green shrubbery, next to a concrete walkway and a sign reading 'Circular' (no other text or symbols visible)

Exterior view of a modern building with glass panels and potted plant, set against a grassy lawn and outdoor background (no signage or text)

Other Complex Shapes

Staines-upon-Thames, Surrey, TW184AX

Imported in AUS: SIHAOPTYLTD.

1 ROKEVA STREET, WOOD NSW 2122, Australia

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

Simple line drawing of a saw cutting through a rack with a red X symbol above (no text or symbols)

Illustration of a server rack with pins and a green checkmark above it (no text or symbols)

Diagram showing a material cross-section with granular texture and layered structure (no text or symbols)

Pure technical line drawing of a mechanical component or bracket (no text or symbols)

Line drawing of a mechanical component with multiple blades and a base plate (no text or symbols)

CLEAR ENGRAVED GRADUATIONS

Precision control of rotation degree

Close-up of a curved black metal fence with green shrubs, next to a concrete walkway and a sign reading 'Circular' (no other text or symbols visible)

Exterior view of a modern building with glass panels and potted plant, set against a grassy lawn and outdoor background (no signage)

Other Complex Shapes

Manufacturer: Shanghai Muxin Wood Industry Co., Ltd.

Address: Room 1602A-1609, No. 11, Lane 803, Shuangcheng Road, Baoshan District, Shanghai 200000, CN.

EC REP: E-CrossStu GmbH.

Mainzer Landstr. 69, 60329 Frankfurt am Main.

UK REP: YH CONSULTING LIMITED.

C/O YH Consulting Limited, Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Imported into AUS: SIHAO PTY LTD.

1 ROKEVA STREET, EASTWOOD NSW 2122, Australia

Import to USA: Sanven Technology Ltd.

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR®

TOUGH TOOLS, HALF PRICE

Simple line drawing of a saw cutting through a rack with a red X symbol above (no text or symbols)

Illustration of a curved ramp with green checkmark above it, no text or symbols present

Diagram showing a granular material layer on the left and a textured surface with a vertical structure on the right (no text or symbols)

Precision control of rotation degree

Close-up of a curved black metal fence with green shrubs, next to a concrete walkway and a sign reading 'Circular' (no other text or symbols visible)

Exterior view of a modern building with glass panels and potted plant, set in grass (no signage)

Other Complex Shapes

Manufacturer: Shanghai Muxin Wood Industry Co., Ltd.

Address: Shuangcheng Road 803, Lane 11, Room 1602A-1609, Baoshan District,

Shanghai 200000, CN.

EC REP: E-CrossStu GmbH.

Mainzer Landstr. 69, 60329 Frankfurt am Main.

UK REP: YH CONSULTING LIMITED.

C/O YH Consulting Limited, Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

ZY-39X5-5 Noir / ZY-39X5-5 Gris / ZY-39X5-5 Marron

Pure geometric shape with four vertical triangles and a horizontal bar, no text or symbols present

NEED HELP? CONTACT US!

PRODUCT FEATURES

PRODUCT ASSEMBLY INSTRUCTIONS

Simple line drawing of a saw cutting through a rack with a red X symbol above, no text or symbols present.

Illustration of a server rack with pins and a green checkmark above it, no text or symbols present.

Diagram showing a granular material layer on the left and a textured surface with a vertical structure on the right, no text or symbols present.

Precision control of rotation degree

Close-up of a curved black metal fence with green shrubs, next to a concrete walkway and a sign reading 'Circular', no other text or symbols visible.

Exterior view of a modern building with glass panels and potted plant, set against a grassy lawn and outdoor background, no signage.

Other Complex Shapes

Manufacturer: Shanghai Muxin Muye Youxian Gongsi

Address: Shuangchenglu 803 Nong 11 Hao 1602A-1609 Shi, Baoshan Qu,

Shanghai 200000 CN.

EC REP: E-CrossStuGmbH.

Mainzer Landstr. 69, 60329 Frankfurt am Main.

UK REP: YH CONSULTING LIMITED.

C/O YH Consulting Limited Bureau 147, Centurion House, London Road, Staines-upon-

Thames, Surrey, TW18 4AX

1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

Simple line drawing of a saw cutting through a rack with a red X symbol above, no text or symbols present.

Illustration of a curved ramp with green checkmark above it, no text or symbols present.

Diagram showing a granular material layer on the left and a textured surface with a vertical structure on the right, no text or symbols present.

Precision control of rotation degree

Close-up of a curved black metal fence with green shrubs, next to a concrete walkway and a sign reading 'Circular' (no other text or symbols visible)

Exterior view of a modern building with glass panels and potted plant, set in grass (no signage)

Other Complex Shapes

Manufacturer: Shanghai Imuxin Wood Industry Co., Ltd.

Address: Room 1602A-1609, No. 11, Lane 803, Shuangcheng Road, Baoshan District,

Shanghai 200000, China.

EC REP: E-CrossStu GmbH.

Mainzer Landstr. 69, 60329 Frankfurt am Main.

UK REP: YH Consulting Limited.

C/O YH Consulting Limited, Kantoor 147, Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR®

TOUGH TOOLS, HALF PRICE

Warranty certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

PRODUCT ASSEMBLY INSTRUCTIONS

Simple line drawing of a saw cutting through a rack with a red X symbol above (no text or symbols)

Illustration of a curved ramp with green checkmark above and four small pins below (no text or symbols)

Diagram showing a granular material layer on the left and a textured surface with a vertical structure on the right (no text or symbols)

Precision control of rotation degree

Close-up of a curved black metal fence with green shrubs, next to a concrete walkway and a sign reading 'Circular' (no other text or symbols visible)

Exterior view of a modern building with glass panels and potted plant, set against a grassy lawn and outdoor background (no signage)

Other Complex Shapes

Manufacturer: Shanghai Muxin Muye Youxian Gongsi

Address: Shuangchenglu 803 nong 11 hao 1602A-1609 shi, Baoshan Qu,

Shanghai 200000 CN.

EC REP: E-CrossStu GmbH.

Mainzer Landstr. 69, 60329 Frankfurt am Main.

UK REP: YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-

upon-Thames, Surrey, TW18 4AX

Imported to AUS: SIHAO PTY LTD.

1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd.

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Simple line drawing of a saw cutting through a rack with a red X symbol above, no text or symbols.

Illustration of a curved ramp with a green checkmark above it, no text or symbols present.

Diagram showing a granular material layer on the left and a textured surface with a vertical structure on the right, no text or symbols.

Precision control of rotation degree

Close-up of a curved black metal fence with green shrubs, next to a concrete walkway and a sign reading 'Circular', no other text or symbols visible.

Exterior view of a modern building with glass panels and potted plant, set in grass, no signage.

Other Complex Shapes

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Staines-upon-Thames, Surrey, TW184AX

Imported to AUS: SIHAOPTYLTD.

1ROKEVASTREETEASTWOODNSW2122Australia

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR®

TOUGH TOOLS, HALF PRICE

Table of contents Click a title to access it

GALVANIZED STEEL METAL EDGING
USER MANUAL
NEED HELP? CONTACT US
WARNING
ASSEMBLY PRECAUTIONS
SAVE THIS MANUAL
PRODUCT SPECIFICATIONS
PRODUCT ASSEMBLY INSTRUCTIONS
CLEAR ENGRAVED GRADUATIONS
VEVOR®
TOUGH TOOLS, HALF PRICE

Manual assistant

Waiting for your message

Product information

Brand : Vevor

Model : ZY-39X5-5Black

Category : DIY tool