AN08A-4.0kg-YMAS - Boat anchor Vevor - Free user manual and instructions

Product Type	Fluke Boat Anchor
Brand	Vevor
Model	AN08A-4.0kg-YMAS
Anchor Weight	4 kg (8.5 lb)
Material	Hot-Dipped Galvanized Steel
Color	Silver
Recommended Boat Length	15 to 30 feet
Kit Contents	Anchor, nylon rope, chain, shackles (2 pieces)
Suitable Bottom Type	Sand, mud
Fresh/Salt Water Use	Yes
Maintenance	Rinse with fresh water after use in salt water, dry and store in a dry place
Safety	Do not use if damaged; keep out of reach of children; do not use under the influence of drugs or alcohol
Spare Parts Available	Replaceable chains and shackles
Made in	China
Warranty	Electronic warranty via www.vevor.com/support

Frequently Asked Questions - AN08A-4.0kg-YMAS Vevor

What is the difference between the AN08A-4.0kg and AN08A-6.0kg models?

The AN08A-4.0kg model weighs 4 kg (8.5 lb) and is suitable for boats 15 to 25 feet, while the AN08A-6.0kg weighs 6 kg (13 lb) and is recommended for boats up to 30 feet.

How do I install the anchor on my boat?

Attach the chain to the anchor using the provided shackles, then tie the nylon rope to the chain. Make sure the boat's anchor roller is compatible and that the assembly is securely fastened.

What types of seabed are suitable for this anchor?

This fluke anchor is optimal for sandy or muddy bottoms. It may not hold properly on rocky or weedy bottoms.

How do I maintain the anchor to prevent corrosion?

After each use in salt water, rinse the whole assembly (anchor, chain, and rope) with fresh water. Dry completely before storing in a dry place. Regularly check for rust and damage.

Can I use this anchor in fresh water?

Yes, galvanized steel resists corrosion in both fresh and salt water. Rinsing is still recommended after use.

What is the length of the rope provided?

The included nylon rope is usually 6 to 8 meters, suitable for most small boats. Check the exact length in the manual.

How do I choose the right anchor size for my boat?

For a boat of 15 to 25 feet, the 4 kg model is sufficient. For 25 to 30 feet, prefer the 6 kg model. Your boat's weight and power also influence the choice.

What to do if a part is damaged?

Do not use the anchor if a part is broken or deformed. Contact Vevor support at www.vevor.com/support to get spare parts (shackles, chain).

Is this anchor suitable for sailboats?

Yes, it is suitable for small sailboats and motorboats within the recommended size range. Make sure the attachment point is strong.

How to store the anchor on board?

Store the anchor in a dry and ventilated place, preferably in a bag or bucket. Avoid leaving it exposed to weather. The rope should be coiled without knots.

USER MANUAL AN08A-4.0kg-YMAS Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

FLUKE BOAT ANCHOR

MODEL: AN08A-4.0kg-YM(AS) / AN08A-6.0kg-YM(AS)

We continue to be committed to providing you with tools at competitive prices. "Save Half", "Half Price", or any other similar expressions used by us only represent the savings you might benefit from buying certain tools with us compared to top brands, and do not necessarily mean that all categories of tools offered are covered. We kindly remind you to verify carefully when placing an order with us to ensure you are actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

FLUKE BOAT ANCHOR

MODEL: AN08A-4.0kg-YM(AS) / AN08A-6.0kg-YM(AS)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves the right to interpret the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of any technology or software updates on our product.

IMPORTANT SAFEGUARDS

Read and understand this entire manual before assembling, installing, operating, or servicing this product. Failure to follow these warnings and instructions can cause personal injury or damage to valuable property.

1. While installing and using this product, keep the work area clean and well lit, and keep spectators and children out of the work area.
2. Install only according to the boat anchor hook parameters. Improper installation can create hazards.
3. Use as intended only.
4. Keep anyone not wearing the appropriate safety equipment away from the area when using.
5. Control the boat anchor hook, personal movement, and the work environment to avoid personal injury or damage to the tool.
6. Do not operate any product when tired or under the influence of drugs, alcohol, or medications.
7. Do NOT operate if any part is damaged or broken.
8. Be careful not to trap fingers or hands in any of the moving parts when opening and closing the rolling boat anchor hook.
9. This is not a toy. Not for use by children. Do not let children play with or misuse this product.

SAVE THESE INSTRUCTIONS

PRODUCT INTRODUCTION

Our premium grade 8.5 lb and 13 lb anchor kit provides reliable anchoring for 15' to 30' feet and includes all you'll need to anchor your boat: a fluke and lead chain with shackles, and a nylon anchor rope. This fluke-style anchor is heavy duty and will dig into the seabed and hold tightly even in high tide or wind conditions.

Our boat anchors will work on 15', 18', 21', 25', and 30' boats. Check the different size recommendations for varying lengths. The anchor chain and anchor are hot-dipped galvanized to ensure durability and corrosion resistance. This set performs extremely well in sand or mud bottoms. Our boat anchor with rope and chain can also be used in freshwater or saltwater.

TIP: Please do not remove the outer packaging; please slowly pull out the anchor from the middle.

PRODUCT PARAMETERS

Model		AN08A-4.0kg-YM (AS)	AN08A-6.0kg-YM (AS)
Anchor Weight		8.5lbs / 4kg	13lbs / 6kg
Anchor Material		Galvanized Steel	Galvanized Steel
Anchor Color		Silver	Silver
Fluke Anchor		1pcs	1pcs
Nylon Rope		1pcs	1pcs
Chain		1pcs	1pcs
Shackles		2pcs	2pcs

Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW : Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

Pooledas Group Ltd

Unit 5 Albert Edward House, The

Pavilions Preston, United Kingdom

EC

REP

SHUNSHUN GmbH

Römeräcker 9 Z2021, 76351

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

PRODUCT PARAMETERS

NEED HELP? CONTACT US!

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

FLUKE BOAT ANCHOR

MODEL: AN08A-4.0kg-YM(COMO) / AN08A-6.0kg-YM(COMO)

PRODUCT PARAMETERS

NEED HELP? CONTACT US!

Imported into Australia: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

electronics www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical support and e-warranty certificate www.vevor.com/support

FLUKE BOOTANKER

MODEL:AN08A-4,0kg-YM(AS) / AN08A-6,0kg-YM(AS)

NEED HELP? CONTACT US!

Rancho Cucamonga, CA 91730

Britse REP

Pooledas Group Ltd

Unit 5 Albert Edward House, The

NEED HELP? CONTACT US!

PRODUCT INTRODUCTION

Rancho Cucamonga, CA 91730

UK

REP

Pooledas Group Ltd

Unit 5 Albert Edward House, The

Pavilions Preston, UK

EC

REP

SHUNSHUN GmbH

Römeräcker 9 Z2021, 76351

Linkenheim-Hochstetten, Germany

Made in China

VEVOR®

TOUGH TOOLS, HALF PRICE