JHQ-CCP-340*250-6 - Cooking accessory Vevor - Free user manual and instructions

Product Type	Steel Pizza Stone
Brand	Vevor
Model	JHQ-CCP-340*250-6
Surface Dimensions	340 x 250 mm
Thickness	6 mm
Material	Carbon Steel
Approximate Weight	5 kg
Primary Use	Baking pizzas, breads, cookies
Recommended Baking Temperature	Up to 260°C (500°F)
Preheating Required	30 minutes minimum
Handle	Grip hole for transport
Maintenance	Do not wash after first use; wipe off residue; lightly oil to prevent rust
First Use	Wash and dry, then oil and heat for 1 hour at 230°C
Safety	Very hot during use; use gloves; do not use as a hammer
Repairability	Solid steel product, no detachable parts; long lifespan if maintained
Warranty	Electronic warranty via certificate
Included Accessories	None (stone only)

Frequently Asked Questions - JHQ-CCP-340*250-6 Vevor

How to prepare the pizza stone before first use?

Wash and dry the stone thoroughly. Then, lightly coat the cooking surface with vegetable oil and place it in the oven at 230°C (450°F) for 1 hour. Allow it to cool in the oven before removing.

How to bake a pizza?

Place the stone on the middle rack and preheat the oven to 260°C (500°F) for at least 30 minutes. Place the pizza on the hot stone and bake until toppings are cooked, rotating the pie halfway through. For extra crispiness, finish under the broiler for 2 minutes.

Can I wash the pizza stone?

After first use, it is not recommended to wash it. Simply wipe off residue or burn it off. If you wash, dry immediately and oil to prevent rust.

What is the hole on the stone for?

The hole serves as a handle to make it easier to transport the heavy stone in and out of the oven.

Can I bake other things besides pizza?

Yes, you can bake bread, cookies, and other foods. Preheat the stone and follow your recipe. You can also place parchment paper or another pan on the stone.

How to prevent rust on the stone?

Keep the stone dry at all times. After use, wipe off residue and, if necessary, apply a thin layer of oil. Treat it like a cast iron pan.

Can the stone be used on a gas stove?

No, this stone is designed for oven use only. Do not use it directly over a flame.

What is the thickness of the stone?

The thickness is 6 mm (indicated in the model reference).

Is the stone compatible with all ovens?

Yes, it fits most household ovens. Check that the dimensions (340x250 mm) allow it to be placed on the rack.

How to contact Vevor technical support?

Send an email to the address indicated in the manual or visit www.vevor.com/support for assistance.

USER MANUAL JHQ-CCP-340*250-6 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

PIZZA BAKING STEEL

MODEL: JHQ-CCP-340*250-6, JHQ-CCP-355*355-6, JHQ-CCP-406*368-6, JHQ-CCP-406*368-10, JHQ-CCP-508*355-10

We continue to be committed to providing you with tools at competitive prices. "Save Half", "Half Price", or any other similar expressions used by us only represent the estimate of savings you might benefit from buying certain tools with us compared to top brands and does not necessarily mean to cover all categories of tools offered. We kindly remind you to verify carefully when placing an order with us to ensure you are actually saving half in comparison with the top major brands.

MODEL: JHQ-CCP-340*250-6, JHQ-CCP-355*355-6, JHQ-CCP-406*368-6, JHQ-CCP-406*368-10, JHQ-CCP-508*355-10

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us: Technical Support and E-Warranty Certificate

www.vevor.com/support

This is the original instruction. Please read all manual instructions before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you receive. Please forgive us that we won't inform you again if there are any technology updates on our product.

Safety Notice

WARNING!

1. Please read the instructions carefully before using this product and understand the specifications.
2. Inspect before every use; do not use if damaged.
3. Keep the pizza baking steel clean when using this product to prolong the service
4. Do not place your fingers or other objects onto the pizza baking steel to avoid injury when using this product.
5. Do not use a pizza baking steel as a hammer to strike objects.

SAVE THESE INSTRUCTIONS

FAQs

How do I use and maintain the pizza steel?

Before the first use, wash the plate and thoroughly dry it. (This is the only time you really need to wash the plate.) Lightly coat the cooking side of the plate with vegetable oil, then put it in the oven at 450 degrees for 1 hour. After treatment, let the plate cool in the oven before removing it. You can do this treatment any time throughout the long life of the plate, especially after you have the urge to wash (and thoroughly dry) the plate.

How do I make pizza?

Place the pizza steel on the middle rack, then preheat your oven to bake at 500 degrees. Allow the steel to preheat for a minimum of 30 minutes. Launch the pizza onto the steel and bake until desired toppings appear cooked, turning the pie halfway through. Keep an eye on the pizza. It cooks fast! Try using a cookie sheet or pizza peel to get the pizza onto the steel without sliding the rack out. After cooking, transfer to a ventilated plate to help with moisture evaporation. Avoid cutting directly on the steel plate. PRO TIP: end the bake cycle and switch to broil for the last 2 minutes to get a crispier crust.

Can I wash the pizza steel?

After an initial wash, you don't need to, nor is it recommended! Wipe off debris. If you wash, dry immediately and perform an oil treatment to avoid rust (see above). It's very important to keep the pizza steel dry to avoid rusting. Think of this like a cast iron pan.

What's the hole for?

It's a thumb pull to help transfer the pizza steel in and out of the oven. We know it's handy!

Can I make more than just pizza?

You sure can! Bread and cookies are no problem. Heat the pizza steel and follow the recipe like normal. Feel free to cook directly on the surface or place parchment paper or a pan on top of the pizza steel.

How else can we help you? Please email us at

We'll amaze you with quick and friendly responses from our California-based support in Buon Appetite!

VEVOR

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate www.vevor.com/support

PIZZA STEEL

MODEL: JHQ-CCP-340 250-6 JHQ-CCP-355 355-6

JHQ-CCP-406 368-6 JHQ-CCP-406 368-10

JHQ-CCP-508*355-10

MODEL: JHQ-CCP-340 250-6 JHQ-CCP-355 355-6 JHQ-CCP-406*368-6

JHQ-CCP-406 368-10 JHQ-CCP-508 355-10

NEED HELP? CONTACT US!

MODEL: JHQ-CCP-340*250-6 JHQ-CCP-355*355-6 JHQ-CCP-406*368-6 JHQ-CCP-406*368-10 JHQ-CCP-508*355-10

MODEL: JHQ-CCP-340*250-6 JHQ-CCP-355*355-6 JHQ-CCP-406*368-6 JHQ-CCP-406*368-10 JHQ-CCP-508*355-10

MODEL: JHQ-CCP-340*250-6 JHQ-CCP-355*355-6 JHQ-CCP-406*368-6 JHQ-CCP-406*368-10 JHQ-CCP-508*355-10

MODEL: JHQ-CCP-340*250-6 JHQ-CCP-355*355-6 JHQ-CCP-406*368-6 JHQ-CCP-406*368-10 JHQ-CCP-508*355-10

MODEL: JHQ-CCP-340*250-6 JHQ-CCP-355*355-6 JHQ-CCP-406*368-6 JHQ-CCP-406*368-10 JHQ-CCP-508*355-10

We remain committed to providing tools at competitive prices.

MODEL: JHQ-CCP-340*250-6 JHQ-CCP-355*355-6 JHQ-CCP-406*368-6

JHQ-CCP-406*368-10 JHQ-CCP-508*355-10

NEED HELP? CONTACT US!

MODEL: JHQ-CCP-340*250-6 JHQ-CCP-355*355-6 JHQ-CCP-406*368-6 JHQ-CCP-406*368-10 JHQ-CCP-508*355-10

MODEL: JHQ-CCP-340*250-6 JHQ-CCP-355*355-6 JHQ-CCP-406*368-6

JHQ-CCP-406*368-10 JHQ-CCP-508*355-10

NEED HELP? CONTACT US!

www.vevor.com/support

MODEL: JHQ-CCP-340*250-6 JHQ-CCP-355*355-6 JHQ-CCP-406*368-6 JHQ-CCP-406*368-10 JHQ-CCP-508*355-10

MODEL: JHQ-CCP-340 250-6 JHQ-CCP-355 355-6 JHQ-CCP-406 368-6 JHQ-CCP-406 368-10 JHQ-CCP-508*355-10

NEED HELP? CONTACT US!

www.vevor.com/support

warranty certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

MODEL: JHQ-CCP-340*250-6 JHQ-CCP-355*355-6 JHQ-CCP-406*368-6 JHQ-CCP-406*368-10 JHQ-CCP-508*355-10

MODEL: JHQ-CCP-340 250-6 JHQ-CCP-355 355-6 JHQ-CCP-406 368-6 JHQ-CCP-406 368-10 JHQ-CCP-508*355-10

NEED HELP? CONTACT US!

www.vevor.com/support