SR191632-1 - Console table Vevor - Free user manual and instructions

USER MANUAL SR191632-1 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

RATTAN CONSOLE TABLE USER MANUAL

MODEL NO.: SR191632-1

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent estimate of savings you might benefit from buying certain tools with us compared to top brands and does not necessarily mean to cover all categories of tools offered by are kindly reminded to verify carefully when you are placing an order with us if you actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

Rattan Console Table

MODEL NO.: SR191632-1

Line drawing of a modern office cabinet with four legs and two side drawers (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instruction carefully before operating. VEVOR reserves a clear interpretation user manual. The appearance of the product shall be subject to product you received. Please forgive us that we won't inform you there are any technology or software updates on our product.

WARNING:

Please read this manual carefully before using the product. F do so may result in serious injury.

ASSEMBLY PRECAUTIONS

1. Assemble only according to these instructions. Improper assemble create hazards.

2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.

3. Keep the assembly area clean and well-lit.

4. Keep bystanders out of the area during assembly.

5. Do not assemble when tired or when under the influence of drugs or medication.

6. The product capabilities apply to properly and completely asset products only.

7. Assemble on a flat, level, hard and smooth surface capable supporting the Rattan Console Table.

8. For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unseparate all parts in a clean work area.

SAVE THESE INSTRUCTIONS

USE PRECAUTIONS

TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:

1. This product is not a toy Do not allow children to play with item.
2. Do not exceed weight capacities, before moving.
3. Use only on a flat, level, hard and smooth surface capable supporting a fully loaded Rattan Console Table.
4. Use as intended only.

Inspect before every use; do not use if parts are loose or dar

TECHNICAL SPECIFICATIONS

Model SR191632-1
Product Dimensions (LxWxH)(mm)	1000*300*745
Packing Size(LxWxH)(mm)	1110*370*140
Net Weight(kg) About 15.3
Gross Weight(kg) About 16.8

*Products such as specifications, appearance, and design a subject to modification without prior notice.

PACKAGE CONTENTS

1		x1	2	[x1]
3		x1	4	[x2]
5		x	6	[x2]
7		x2	8	[x1]
9		x1	10	[x1]
11		x2	12	[x2]
13		x4	14	[x4]
15		x1	16	[x1]

A	x14	B
C	x16	D	x12
E	x8	F	x4
G	x12	H	x15
I	x16	J	x4
K	x2	L	x8
M	x4	N	x10
O[KTHS]	x1	P	x1
Q	x1	R	x4

Exploded view diagram of a modular assembly with numbered components for identification

1 BACK THIS HOLE FRONT G 2 F G G THIS HOLE BACK FRONT G 3 F G G ③ F G G ⑧ Left G 8 Right F x4 G x8

2

A ⑧ A C C ①

4

Three-step diagram showing a screwdriver, a switch, and a tool on a floor (no text or symbols)

Technical diagram showing a mechanical assembly with labeled components A and C, including tool positioning and assembly steps.

5

Isometric line drawing of a two-panel cabinet or enclosure with a downward arrow indicating compression (no text or symbols)

6

② ③ ④ ⑤ ⑥ ⑧ C C H H H H ⑩ C H H

7

D×2 ⑫ ⑫ ⑩ D×2

8

D×8 ⑪ C ⑪ C ⑩ C ⑪ C

9

⑬ ⑭ ⑮ ⑯ ⑰ ⑱ ⑲ ⑳ ⑰×16

10

E L N ⑭ ⑭ ⑬ E × 4

E x4 L x4 N x4

11

E×4 E L N ⑭ ⑭ ⑭ ⑭ E x4 L x4 N x4

12

2 H H ⑦ H H ⑤ REPEAT for both Drawers 4 6 5 4 5 A A B B G G A B B K K left drawer right drawer A x8 B x8 G x4 H x8 K x2

13

J J J J 15 16

14

Rx4 M N Q P M M

M x4 N x1 P x1 Q x1 R x4

WARNING!

IN ORDER TO PREVENT OVERTURNING THIS PRODUCT MUST BE USED WITH THE WALL ATTACHMENT DEVICE PROVIDED

ONH N

N x1 O x1 H x1

COMPLETION

Line drawing of a modern office desk with two drawers and four legs (no text or symbols)

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTW NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anal Place, Rancho Cucamonga, CA 91730

REPE

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main.

REPUK

YH CONSULTING LIMITED.

G/O YH Consulting Limited Office 147, Centurion

House, London Road, Staines-upon-Thames, Surrey,

TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Line drawing of a modern office desk with two drawers and four legs (no text or symbols)

BESOIN D'AIDE? CONTACTEZ-NOUS!

1		x1	2	[x1
3		x1	4	[x2
5		x2	6	[x2
7		x2	8	[x1
9		x1	10	[x1
11		x2	12	[x2
13		x4	14	[x4
15		x1	16	[x1

A	x14	B	x14
C	x16	D	x12
E	x8	F	x4
G	x12	H	x15
I	x16	J	x4
K	x2	L	x8
M	x4	N	x10
O	x1	P	x1
Q	x1R	O	x4

ÉTAPES D'ASSEMBLAGE

Exploded view diagram of a modular furniture or mechanical assembly with numbered components for identification.

1 BACK G THIS HOLE FRONT 2 G G G G G F F G F G G ② G G G ③ G G G F x4 G x8 ⑧ Left G G G ⑧ Right

2

A ⑧ A C C ①

4

Three-step diagram showing a screwdriver inserted into a floor, next to a switch and a tool in action (no text or symbols)

Technical diagram showing a mechanical assembly with labeled components A and C, including tool positioning and assembly steps.

5

⑨ 60:14 60:14

6

Technical diagram of a structural assembly with labeled components and dimensions

7

D×2 ⑫ ⑫ ⑩ D×2

8

D×8 ⑪ C ⑪ C ⑩ C ⑪ C

9

1×16 ⑪ ⑪ ⑪ ⑬ ⑬ ⑬ ⑬ ⑬ ⑬

10

E L N ⑭ ⑭ ⑬ E × 4

ET x4 L x4 N x4

11

E×4 14 14 13 ET x4 L x4 N x4

12

2 H H ⑦ H H ⑤ REPEAT for both Drawers 4 ⑥ 4 ⑤ A A B B G G A B B ④ 15 left drawer right drawer A B G ④ A B B ⑤ B B B ④ 16 UN x B x G x H x K x

13

J J 15 16

14

M Rx4 M N Q P M

M x4 N x1 P x1 Q x1 R x4

15

WARNING!

IN ORDER TO PREVENT OVERTURNING THIS PRODUCT MUST BE USED WITH THE WALL ATTACHMENT DEVICE PROVIDED

ON NH N

N x1 LE x1 H x1

ACHÈVEMENT

Line drawing of a modern office desk with four legs and two side drawers (no text or symbols)

Fabricant : Shanghaimuxinmuyeyouxiangongsi Adresse :

Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Importé en Australie : SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australie

A/S YH Consulting Limited Bureau 147, Centurion

Maison, London Road, Staines-upon-Thames, Surrey,

TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Line drawing of a modern office cabinet with two drawers and four legs (no text or symbols)

A	x14	B	x14
C	x16	D	x12
E	x8	F	x4
G	x12	H	x15
I	x16	J	x4
K	x2	L	x8
M	x4	N	x10
O	x1	P	x1
Q	x1	R	x4

MONTAGEANLEITUNG

Exploded view diagram of a modular furniture or mechanical assembly with numbered components for identification.

2

A ⑧ A C C ①

4

Three-step diagram showing a screwdriver inserted into a floor, next to a switch and a tool in action (no text or symbols)

Technical diagram showing a mechanical assembly with labeled components A and C, including tool positioning and assembly steps.

5

⑨ 6 5 0 0 641.0

6

② ③ ④ ⑤ ⑥ ⑦ ⑧ H H H H H ⑩ C C C C H H H

7

D×2 ⑫ ⑫ ⑩ D×2

8

D×8 ⑪ C ⑪ C ⑩ C ⑪ C

9

1×16 ⑪ ⑪ ⑪ ⑬ ⑬ ⑬ ⑬ ⑬

10

E L N ⑭ ⑭ ⑬ E × 4

UND x4 M x4 N x4

11

E×4 14 14 13 E L N UND x4 M x4 N x4

12

2 H H ⑦ H H ⑤ REPEAT for both Drawers 4 ⑥ 4 ⑤ A A B B G G A B B ④ 15 left drawer right drawer A x B x G x H x K x

13

J J 15 16

14

Rx4 M N Q P M M M

M x4 N x1 P x1 Q x1 R x4

15

WARNING!

IN ORDER TO PREVENT OVERTURNING THIS PRODUCT MUST BE USED WITH THE WALL ATTACHMENT DEVICE PROVIDED

ON H N

N x1 DER x1 H x1

FERTIGSTELLUNG

Line drawing of a modern side table with four legs and two drawers (no text or symbols)

Hersteller: Shanghaimuxinmuyeyouxiangongsi Adresse:

Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200000 CN.

Nach AUS importiert: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australien

Importiert in die USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

C/O YH Consulting Limited Office 147, Centurion

Haus, London Road, Staines-upon-Thames, Surrey,

TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Line drawing of a modern office cabinet with two drawers and four legs (no text or symbols)

Exploded view diagram of a modular furniture or mechanical assembly with numbered components for identification.

2

A ⑧ A C C ①

4

Three-step diagram showing a screwdriver inserted into a floor, next to a switch and a tool in action (no text or symbols)

Technical diagram showing a mechanical assembly with labeled components A and C, including tool positioning and assembly steps.

5

⑨ 60:14 60:14

6

Technical diagram of a structural assembly with labeled components and dimensions

7

D×2 ⑫ ⑫ ⑩ D×2

8

D×8 ⑪ C ⑪ C ⑩ C ⑪ C

9

1×16 ⑪ ⑪ ⑪ ⑬ ⑬ ⑬ ⑬ ⑬ ⑬

10

E L N ⑭ ⑭ ⑬ E × 4

11

E L N E × 4 14 14 13 E x4 L x4 N x4

12

2 H H ⑦ H H ⑤ REPEAT for both Drawers 4 ⑥ 4 ⑤ A A B B G G 15 A B B ④ A B B ④ B G ⑤ A B B ⑤ B G ⑥ K left drawer right drawer UN x B x G x H x E x

13

J J 15 16

14

Rx4 M N Q P M M M

M x4 N x1 P x1 Q x1 R x4

15

WARNING!

IN ORDER TO PREVENT OVERTURNING THIS PRODUCT MUST BE USED WITH THE WALL ATTACHMENT DEVICE PROVIDED

ON NH N

N x1 IL x1 H x1

COMPLETAMENTO

Line drawing of a modern side table with four legs and two drawers (no text or symbols)

Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Importato negli USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

C/O YH Consulting Limited Ufficio 147, Centurion

Casa, London Road, Staines-upon-Thames, Surrey,

TW184AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Line drawing of a modern office cabinet with two drawers and four legs (no text or symbols)

1	[X1]	2	x1
3	x1	4	x2
5	x2	6	x2
7	x2	8	x1
9	x1	10	x1
11	x2	12	x2
13	x4	14	x4
15	x1	16	x1
A	x14	B	x14
C	x16	D	x12
E	x8	F	x4
G	x12	H	x15
I	x16	J	x4
K	x2	L	x8
M	x4	N	x10
O	x1	P	x1
Q	x1R	○	x4

PASOS DE MONTAJE

Exploded view diagram of a modular furniture or mechanical assembly with numbered components for identification.

1 BACK G THIS HOLE FRONT 2 G G THIS HOLE BACK FRONT 3 F G G F G F G ⑧ Left 8 Right F x4 x8

2

A ⑧ A C C ①

4

Three-step diagram showing a screwdriver inserted into a floor, next to a switch and a tool in action (no text or symbols)

Technical diagram showing a mechanical assembly with labeled components A and C, including tool positioning and assembly steps.

5

⑨ 60:14 60:14

6

Technical diagram of a structural assembly with labeled components and dimensions

7

D×2 ⑫ ⑫ ⑩ D×2

8

D×8 ⑪ C ⑪ C ⑩ C ⑪ C

9

1×16 ⑪ ⑪ ⑪ ⑬ ⑬ ⑬ ⑬ ⑬ ⑬

10

E L N ⑭ ⑭ ⑬ E × 4

Y x4 yo x4 norto x4

11

E×4 ⑭ ⑭ ⑭ ⑭ ⑭ Y x4 -y0 x4 x4

12

2 H H 5 ⑦ ④ ⑥ REPEAT for both Drawers 4 ⑤ A A ④ ⑤ A B B A B G G 15 left drawer right drawer A B G G 16 A B K B x A x B x y0 x K x

13

J J 15 16

14

Rx4 M N Q P M M M

X4 x4 mable x1 PAG x1 Q x1 R x4

15

WARNING!

IN ORDER TO PREVENT OVERTURNING THIS PRODUCT MUST BE USED WITH THE WALL ATTACHMENT DEVICE PROVIDED

ON H

nutbe x1 EL x1 yo x1

TERMINACIÓN

Line drawing of a modern office cabinet with two drawers and four legs (no text or symbols)

Casa, London Road, Staines-upon-Thames, Surrey,

TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Line drawing of a modern office cabinet with two drawers and four legs (no text or symbols)

POTRZEBUJESZ POMOCY? SKONTAKTUJ SIĘ Z NAMI!

A	x14	B	x14
C	x16	D	x12
E	x8	F	x4
G	x12	H	x15
I	x16	J	x4
K	x2	L	x8
M	x4	N	x10
O	x1	P	x1
Q	x1	R	x4

KROKI MONTAŻU

Exploded view diagram of a modular furniture or mechanical assembly with numbered components for identification.

1 BACK G THIS HOLE FRONT 2 G G G G G F F G F G G ② G G G ③ G G G F x4 G x8 ⑧ Left G G G ⑧ Right

2

A ⑧ A C C ①

4

Three-step diagram showing a screwdriver inserted into a floor, adjusting the socket, and adjusting the tool with a handle (no text or symbols present)

Technical diagram showing a mechanical assembly with labeled components A and C, including tool positioning and assembly steps.

5

⑨ 60:14 60:14

6

Technical diagram of a structural assembly with labeled components and dimensions

7

D×2 ⑫ ⑫ ⑩ D×2

8

D×8 ⑪ C ⑪ C ⑩ C ⑪ C

9

1×16 ⑪ ⑪ ⑪ ⑬ ⑬ ⑬ ⑬ ⑬

10

E L N ⑭ ⑭ ⑬ E × 4

11

E×4 ⑭ ⑭ ⑭ ⑭ I x4 L x4 N x4

12

2 H H ⑦ H H ⑤ REPEAT for both Drawers 4 6 4 5 A A B B G G A B B ④ 15 left drawer right drawer A A B B G G ④ A B B ⑤ B B B ⑥ K K A x B x G x H x K x

13

J J 15 16

14

Rx4 M N Q P M M M

M x4 N x1 P x1 Q x1 R x4

15

WARNING!

IN ORDER TO PREVENT OVERTURNING THIS PRODUCT MUST BE USED WITH THE WALL ATTACHMENT DEVICE PROVIDED

ON H N

N x1 TO x1 H x1

UKOŃCZENIE

Line drawing of a modern office desk with four legs and two side drawers (no text or symbols)

Producent: Shanghaimuxinmuyeyouxiangongsi Adres:

Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, szanghaj 200000 CN.

Importowane do AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Importowane do USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

Przedstawiciel UE

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt nad Menem.

REP WIELKIEJ BRYTANII

YH CONSULTING LIMITED.

C/O YH Consulting Limited Biuro 147, Centurion

Dom, London Road, Staines-upon-Thames, Surrey,

TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Line drawing of a modern office cabinet with two drawers and four legs (no text or symbols)

HULP NODIG? NEEM CONTACT MET ONS OP!

A	x14	B	x14
C	x16	D	x12
E	x8	F	x4
G	x12	H	x15
I	x16	J	x4
K	x2	L	x8
M	x4	N	x10
O	x1	P	x1
Q	x1	R	x4

MONTAGESTAPPEN

Exploded view diagram of a modular furniture or mechanical assembly with numbered components for identification.

2

A ⑧ A C C ①

4

Three-step diagram showing a screwdriver inserted into a floor, next to a switch and screwdriver on a sink (no text or symbols present)

Technical diagram showing a mechanical assembly with labeled components A and C, including tool positioning and assembly steps.

5

⑨ 60:14 60:14

6

Technical diagram of a structural assembly with labeled components and dimensions

7

D×2 ⑫ ⑫ ⑩ D×2

8

D×8 ⑪ C ⑪ C ⑩ C ⑪ C

9

1×16 ⑪ ⑪ ⑪ ⑬ ⑬ ⑬ ⑬ ⑬ ⑬

10

E L N ⑭ ⑭ ⑬ E × 4

11

E×4 14 14 13 EN x4 lk x4 N x4

12

2 H H ⑦ H H ⑤ REPEAT for both Drawers 4 6 ④ ⑤ A A B B G G A B B K 15 left drawer ④ ⑤ A A A B B B G G A B B G K right drawer ⑭ A x B x G x H x Ik x

13

J J 15 16

14

Rx4 M N Q P M M M

M x4 N x1 P x1 Q x1 R x4

15

WARNING!

IN ORDER TO PREVENT OVERTURNING THIS PRODUCT MUST BE USED WITH THE WALL ATTACHMENT DEVICE PROVIDED

ON NH N Φ5

N x1 DE x1 H x1

VOLTOOING

Line drawing of a modern side table with four legs and two drawers (no text or symbols)

Fabrikant: Shanghaimuxinmuyeyouxiangongsi Adres:

Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

C/O YH Consulting Limited Kantoor 147, Centurion

Huis, London Road, Staines-upon-Thames, Surrey,

TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

garantiecertificaat www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

KONSOLLBORD FÖR RATTAN

ANVÄNDARMANUAL

MODELLNR: SR191632-1

Line drawing of a modern side table with two drawers and four legs (no text or symbols)

BEHÖVER HJÄLP? KONTAKTA OSS!

A	x14	B	x14
C	x16	D	x12
E	x8	F	x4
G	x12	H	x15
I	x16	J	x4
K	x2	L	x8
M	x4	N	x10
O	x1	P	x1
Q	x1	R	x4

MONTERINGSSEG

Exploded view diagram of a modular furniture or mechanical assembly with numbered components for identification.

2

A ⑧ A C C ①

4

Three-step diagram showing a screwdriver inserted into a floor, next to a switch and screwdriver on a sink (no text or symbols present)

Technical diagram showing a mechanical assembly with labeled components A and C, including tool positioning and assembly steps.

5

⑨ 60:14 60:14

6

Technical diagram of a structural assembly with labeled components and dimensions

7

D×2 ⑫ ⑫ ⑩ D×2

8

D×8 ⑪ C ⑪ C ⑩ C ⑪ C

9

1×16 ⑪ ⑪ ⑪ ⑬ ⑬ ⑬ ⑬ ⑬ ⑬

10

E L N ①② ③④ E × 4

OCH x4 L x4 N x4

11

E×4 14 14 13 L x4 OCH x4 L x4 N x4

12

2 H H ⑦ H H ⑤ REPEAT for both Drawers 4 ⑥ 4 ⑤ A A B B G G A B B ④ 15 left drawer right drawer A B G ④ A B B ⑤ A B B ⑥ K K A x B x G x H x K x

13

J J 15 16

14

Rx4 M N Q P M M M

M x4 N x1 P x1 Q x1 R x4

15

WARNING!

IN ORDER TO PREVENT OVERTURNING THIS PRODUCT MUST BE USED WITH THE WALL ATTACHMENT DEVICE PROVIDED

ON NH N Φ5

N x1 DE x1 H x1

KOMPLETTERING

Line drawing of a modern side table with four legs and two drawers (no text or symbols)

Tillverkare: Shanghaimuxinmuyeyouxiangongsi Adress:

Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Importerad till AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australien

Importerad till USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main.

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion

House, London Road, Staines-upon-Thames, Surrey,

TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support