TL-100BG - Projection screen Vevor - Free user manual and instructions

USER MANUAL TL-100BG Vevor

Technical Support and E-Warranty Certificate

www.vevor.com/support

PROJECTION SCREEN

USER MANUAL

MODEL NO.: YD-90, YD-135, YD-150, YD-180

We continue to be committed to provide you tools with competitive price.

"Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

Projection Screen

MODEL NO.: YD-90, YD-135, YD-150, YD-180

Simple line drawing of a blank rectangular frame with vertical supports (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of o user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you ag there are any technology or software updates on our product.

WARNING:

Please read this manual carefully before using the product. Failure do so may result in serious injury. SAVE THESE INSTRUCTION

ASSEMBLY PRECAUTIONS

1. Assemble only according to these instructions. Improper assembly c create hazards.
2. Wear ANSI-approved safety goggles and work gloves during assembly
3. Keep the assembly area clean and well-lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or under the influence of alcohol, drug medication.
6. The product capabilities apply to properly and completely assembled products only.
7. Assemble on a flat, level, hard and smooth surface capable of sa supporting the Projection Screen.
8. For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwra and separate all parts in a clean work area.
9. The warranty will only be valid if you follow the instructions below carefully! Improper use and care may cause serious injury and/or damage!
10. Make sure the surface you have chosen for installing the screen and secure.. Please read the following as any damage to the screens surface will impact the image's quality:
    A. Do not touch the screen surface by hand.
    B. Do not write or draw on the screen surface.
    C. Do not poke the screen surface with finger or edge tools as it n cause scratches or tears.
11. Retract the screen after every use.

12. Do not pull two sides of the screen fabric by hands, do not fold screen fabric.

13. To prevent unnecessary damage, the operation and maintenance of the screen should be done by adult.

Ignoring the safety warnings may lead to injuries or damaging the product.

Retract the screen after every use. Leave it hanging for along period may cause screen fabric loose.

Avoid hanging anything on the screen as it may cause the screen to fall down.

The screen should be installed at secure place to avoid any accidents or the screen falling down

Loose parts may cause the screen fall down.

USE PRECAUTIONS

TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:

1. DO NOT SIT OR STAND ON THIS ITEM.
2. This product is not a toy. Do not allow children to play with or item.
3. Use only on a flat, level, hard and smooth surface capable of sa supporting a fully loaded Projection Screen.
4. Use as intended only.
5. Inspect before every use. Do not use if parts are loose or damage
6. Clear out an area to assemble the screen. Make sure the area is than the size of the screen.
7. Remember that the assembly will require at least two people for steps.
8. Do not assemble in areas with a high temperature to avoid damage, the screen.
9. Read through this entire Assembly Guide before.

SAVE THESE INSTRUCTIONS

TECHNICAL SPECIFICATIONS

Model YD-90	YD-135
Screen Size 90	inch, 16:9 135 inch, 16:9
Product Dimensions (LxWxH)(mm)	2216*400*1930	3346*400*2400
Packing Size (LxWxH)(mm)	1060*130*115	1110*170*130
Net Weight (kg)	About 5.1 About 6.5
Gross Weight (kg)	About 5.6	About 7

Model	YD-150	YD-180
Screen Size	150 inch, 16:9	180 inch, 16:9
Product Dimensions (LxWxH)(mm)	3576*400*2550	4236*400*2850
Packing Size (LxWxH)(mm)	1110*170*130	1110*170*130
Net Weight (kg) About 6.8		About 7.6
Gross Weight (kg)	About 7.3	About 8.1

PACKAGE CONTENTS

Two identical rectangular metal plates with evenly spaced holes, shown side by side (no text or symbols)

A

B

standing feet
standing feet bolt + screwdiver

Four line drawings of a mechanical component with circular features and mounting holes (no text or symbols)

C
connector + connector screwdiver

Simple line drawing of a cylindrical object with internal curved lines (no text or symbols)

D

projector screen fabric

Line drawing of a rectangular box with a handle and square button (no text or symbols)

E
carrying bag

TOP C C D BOTTOM C C LEFT RIGHT A A

ASSEMBLY STEPS

STEP1

- Press the button snap, assemble the 4 sets of poles top, bottom, and right.

TOP BOTTOM LEFT RIGHT

STEP2

- Attach the vertical poles (LEFT & RIGHT) to the feet using the included bolts and screwdriver.

Technical line drawing of a mechanical assembly with a cylindrical component and a base plate, showing a rotation arrow (no text or symbols)

STEP3

- Slide the horizontal poles (TOP & BOTTOM) through the top and bottom pole pocket.

TOP

STEP4

- Attach the horizontal poles (TOP & BOTTOM) to the vertical poles (LEFT & RIGHT) by the metal connectors. Use the velcro on the fabric to fix the vertical poles, make the screen tight and smooth.

COMPLETION

Simple line drawing of a rectangular frame with vertical supports at both ends (no text or symbols)

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

REPE

E-CrossStu GmbH. Mainzer Landstr.69, 60329 Frankfurt am Main.

REPU

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Made In Chân

VEVOR®

TOUGH TOOLS, HALF PRICE

Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Assistance technique et certificat garantie

N° DE MODÈLE : YD-90, YD-135, YD-150, YD-180

N° DE MODÈLE : YD-90, YD-135, YD-150, YD-180

Simple line drawing of a blank rectangular frame with vertical supports (no text or symbols)

BESOIN D'AIDE ? CONTACTEZ-NOUS !

Two identical rectangular metal plates with evenly spaced holes, no text or symbols present.

UN

B

Pure technical line drawings of mechanical components without any text, numbers, or symbols

Simple line drawing of a cylindrical object with internal curved lines and two black rectangular ends (no text or symbols)

D

Line drawing of a rectangular box with a handle and a small square opening (no text or symbols)

Simple line drawing of a mechanical assembly with a cylindrical component and a base plate, showing a rotation arrow (no text or symbols)

ÉTAPE 3

Diagram showing a pipe joint with a valve and a circular component, no text or symbols present

UN

Pure mechanical diagram showing a valve or actuator assembly with no text, numbers, or symbols

Diagram showing a mechanical component with a pin and a separate cylindrical component, no text or symbols present.

D

Pure mechanical component diagram without any text, numbers, or symbols

ACHÈVEMENT

Simple line drawing of a rectangular frame with vertical supports at both ends (no text or symbols)

Adresse : Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Importé en Australie : SIHAO PTY LTD. 1 ROKEVA STREET, ASTWOOD NSW 2122 Australie

A/S YH Consulting Limited Bureau 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Fabriqué au Chin

VEVOR®

TOUGH TOOLS, HALF PRICE

N° DE MODÈLE : YD-90, YD-135, YD-150, YD-180

N° DE MODÈLE : YD-90, YD-135, YD-150, YD-180

Simple line drawing of a blank rectangular frame with vertical supports (no text or symbols)

BESOIN D'AIDE ? CONTACTEZ-NOUS !

Technical drawings of four different structural components: two rectangular plates, two screws, and a bent pipe (no text or symbols)

Pure technical line drawings of mechanical components without any text, numbers, or symbols

Simple line drawing of a draped fabric or garment with no text or symbols

Simple line drawing of a rectangular box with a handle and a small square cutout on the side (no text or symbols)

Simple line drawing of a mechanical assembly with a cylindrical component and a base plate, showing a rotation arrow (no text or symbols)

ÉTAPE 3

Diagram showing a pipe joint with a valve and a circular component, no text or symbols present

UN

Pure mechanical diagram showing a valve or actuator assembly with no text, numbers, or symbols

Diagram showing a mechanical component with a pin and a separate cylindrical component, no text or symbols present.

D

Pure mechanical component diagram without any text, numbers, or symbols

ACHÈVEMENT

Simple line drawing of a rectangular frame with vertical supports at both ends (no text or symbols)

Adresse : Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Importé en Australie : SIHAO PTY LTD. 1 ROKEVA STREET, ASTWOOD NSW 2122 Australie

YH CONSULTING LIMITÉE. A/S YH Consulting Limited Bureau 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18AX

Fabriqué au Chin

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

Projektionsleinwand

BENUTZERHANDBUCH

MODELL-NR.: YD-90, YD-135, YD-150, YD-180

MODELL-NR.: YD-90, YD-135, YD-150, YD-180

Simple line drawing of a blank rectangular frame with vertical supports (no text or symbols)

Two identical rectangular metal plates with evenly spaced holes, no text or symbols present.

A

B

Four line drawings of a mechanical or anatomical component with circular features and circular ends, no text or symbols present.

Simple line drawing of a cylindrical object with curved internal lines and two black rectangular ends (no text or symbols)

D

Line drawing of a rectangular box with a handle and a small square opening (no text or symbols)

E Tragetasche

TOP C C D BOTTOM LEFT RIGHT A A C

MONTAGEANLEITUNG

SCHRITT

Simple line drawing of a mechanical assembly with a cylindrical component and a base plate, showing no text or symbols.

SCHRITT

Diagram showing a pipe fitting with a valve and a rotating component (no text or symbols)

A

Pure mechanical diagram showing a lever and valve assembly without any text or symbols

Diagram showing a tool interacting with a cylindrical object, labeled B (no text or symbols on the diagram itself)

D

Pure mechanical component diagram without any text, numbers, or symbols

FERTIGSTELLUNG

Simple line drawing of a blank rectangular frame with vertical supports (no text or symbols)

Adresse: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200000 CN.

Place, Rancho Cucamonga, CA91730

EG-Vertreter

E-CrossStu GmbH.

Mainzer Landstr.69, 60329 Frankfurt a Main.

UK REP

YH CONSULTINGLIMITED.

C/O YH Consulting Limited Office 147, Centurion House,

London Road, Staines-upon-Thames, Surrey, TW18AX

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

elettronica www.vevor.com/support

MODELLO N.: YD-90, YD-135, YD-150, YD-180

MODELLO N.: YD-90, YD-135, YD-150, YD-180

Simple line drawing of a blank rectangular frame with vertical supports (no text or symbols)

Technical drawings of four different structural components: two rectangular plates, two screws, and a bent pipe (no text or symbols)

Pure technical line drawings of mechanical components without any text or symbols

Simple line drawing of a cylindrical object with internal curved lines, labeled 'D' at the bottom (no text or symbols on the object itself)

Line drawing of a rectangular box with a handle and square button (no text or symbols)

Simple line drawing of a mechanical assembly with a cylindrical component and a base plate, showing a rotation arrow (no text or symbols)

Diagram showing a pipe joint with a valve and a circular component, no text or symbols present

UN

Pure mechanical diagram showing a valve or actuator assembly with no text, numbers, or symbols

Diagram showing a mechanical component with a pin and a separate cylindrical part, labeled B (no text or symbols on the diagram itself)

D

Diagram of a mechanical component with a red curved arrow indicating rotation or motion (no text or symbols)

COMPLETAMENTO

Simple line drawing of a rectangular frame with vertical supports at both ends (no text or symbols)

Indirizzo: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD

Nuovo Galles del Sud 2122 Australia

Importato negli USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim

Luogo, Rancho Cucamonga, CA91730

Rappresentante dellaCE

E-CrossStu GmbH.

Mainzer Landstr.69, 60329 Francoforte sMeno.

RAPPRESENTANZA DEL REGNOUNITO

YH CONSULTING LIMITED.

C/O YH Consulting Limited Ufficio 147, Centurion House,

London Road, Staines-upon-Thames, Surrey, TW18 4AX

Prodotto in Cina

VEVOR®

TOUGH TOOLS, HALF PRICE

N.° DE MODELO: YD-90, YD-135, YD-150, YD-180

N.° DE MODELO: YD-90, YD-135, YD-150D-180

Simple line drawing of a blank rectangular frame with vertical supports (no text or symbols)

Two identical rectangular metal plates with evenly spaced holes, no text or symbols present.

A

B

Four line drawings of a mechanical or anatomical component with circular features and circular ends, no text or symbols present.

Conector C + destornillador denector

Simple line drawing of a cylindrical object with internal curved lines and two black rectangular ends (no text or symbols)

D

Line drawing of a rectangular object with a handle and a small square opening, resembling a tool or device (no text or symbols)

Simple line drawing of a mechanical assembly with a cylindrical component and a base plate, showing a rotation arrow (no text or symbols)

PASO 3

Diagram showing a pipe joint with a valve and a circular component, no text or symbols present

A

Pure mechanical diagram showing a valve or actuator assembly with no text, numbers, or symbols

Diagram showing a mechanical component with a pin and a separate cylindrical component, labeled B (no text or symbols on the diagram itself)

D

Diagram of a mechanical component with a red curved arrow indicating rotation or motion (no text or symbols)

TERMINACIÓN

Simple line drawing of a blank rectangular frame with vertical supports (no text or symbols)

Dirección: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Importado a AUS: SIHAO PTY LTD. 1 ROKEVA STREET, EASTWOOD NSW 2122 Australia

Importado a EE. UU.: Sanven Technology Ltd. Suite 250, 9166 Anaheim Lugar, Rancho Cucamonga, CA1730

Representante de la CE

C/O YH Consulting Limited Oficina 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Hecho en China

VEVOR®

TOUGH TOOLS, HALF PRICE

NR MODELU: YD-90, YD-135, YD-150, YD-180

NR MODELU: YD-90, YD-135, YD-150, YD-180

Simple line drawing of a blank rectangular frame with vertical supports (no text or symbols)

POTRZEBUJESZ POMOCY? SKONTAKTUJ SIĘ Z NAMI!

Two identical rectangular metal plates with evenly spaced holes, no text or symbols present.

A

B

Four line drawings of a mechanical or anatomical component with circular features and circular ends, no text or symbols present.

Simple line drawing of a cylindrical object with curved internal lines and two black rectangular ends (no text or symbols)

D

Line drawing of a rectangular object with a handle and a small square opening, resembling a tool or device (no text or symbols)

Simple line drawing of a mechanical assembly with a cylindrical component and a base plate, showing a rotation arrow (no text or symbols)

KROK 3

Diagram showing a pipe being inserted into a socket with a bent tube, no text or symbols present

A

Pure mechanical diagram showing a valve or actuator assembly with no text, numbers, or symbols

Diagram showing a mechanical assembly with a lever and a cylinder, no text or symbols present

D

Pure mechanical component diagram without any text, numbers, or symbols

UKOŃCZENIE

Simple line drawing of a rectangular frame with vertical supports at both ends (no text or symbols)

Adres: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, szanghaj 200000 CN.

Importowane do AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD

NSW 2122 Australia

Importowane do USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim

C/O YH Consulting Limited Biuro 147, Centurion House,

London Road, Staines-upon-Thames, Surrey, TW18AX

www.vevor.com/support

PROJECTIESCHERM

GEBRUIKERSHANDLEIDING

MODEL NR.: YD-90, YD-135, YD-150, YD-180

MODEL NR.: YD-90, YD-135, YD-150, YD-180

Simple line drawing of a blank rectangular frame with vertical supports (no text or symbols)

HULP NODIG? NEEM CONTACT MET ONS OP!

Two identical rectangular metal plates with evenly spaced holes, no text or symbols present.

A

B

Four line drawings of a mechanical or anatomical component with circular features and circular ends, no text or symbols present.

Simple line drawing of a cylindrical object with internal curved lines and two black rectangular ends (no text or symbols)

D

projectieschermstof

Simple line drawing of a rectangular box with a handle and a small square opening (no text or symbols)

E draagtas

TOP C C D BOTTOM LEFT RIGHT A A C

MONTAGESTAPPEN

STAP 1

Simple line drawing of a mechanical assembly with a cylindrical component and a base plate, showing a rotation arrow (no text or symbols)

STAP 3

Diagram showing a pipe joint with a valve and a circular component, no text or symbols present

A

Pure mechanical diagram showing a valve or actuator assembly with no text, numbers, or symbols

Diagram showing a tool interacting with a cylindrical object, labeled 'B' (no text or symbols on the diagram itself)

D

Diagram of a mechanical component with a red curved arrow indicating rotation or motion (no text or symbols)

VOLTOOING

Simple line drawing of a rectangular frame with vertical supports at both ends (no text or symbols)

Adres: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

House, London Road, Staines-upon-Thames, Surrey, TW18 4

Gemaakt in ChinA

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support