SZJJZW01B - Car seat Vevor - Free user manual and instructions

Product Type	Pet Barrier for Car
Model	SZJJZW01B
Brand	Vevor
Dimensions (L x H)	35.4 x 16.5 inches (90 x 42 cm)
Main Material	Metal (main grid) and side panels
Included Accessories	Protective net, nylon straps, circular clamps, bolts, hand screws
Foldability	Not foldable (model SZJJZW01B)
Power Supply	None (mechanical)
Main Functions	Separation barrier between front and rear seats, pet protective net
Installation	Fixation using C-clamps on door pillars or headrests; possible configurations: 6 different layouts
Maintenance and Cleaning	Wipe with a slightly damp soft cloth; do not use corrosive detergents or abrasives
Safety	Wear gloves during assembly; keep children and animals away; check regularly for wear
Spare Parts and Repairability	Available parts: main grid, side panels, clamps, bolts, straps, protective net
General Information	Manufactured by Shanghaimuxinmuyeyouxiangongsi; imported by SIHAO PTY LTD (Australia) and Sanven Technology Ltd (United States)

Frequently Asked Questions - SZJJZW01B Vevor

How to install the SZJJZW01B barrier?

First measure the width of the passenger compartment, then adjust the barrier. Attach the side panels to the main panel with the provided screws and nuts. Install the C-clamps on the door pillars at the correct angle. You can also fasten the straps to the headrests for extra stability.

Is the barrier foldable?

No, the SZJJZW01B model is not foldable. Other models in the range (SZJJSZW01, SZJJSZW02) are foldable.

What type of protective net is provided?

The protective net is designed to be installed between the front seats. It attaches to the headrests on both sides with the upper straps and under the seat with the lower straps.

How to clean the barrier?

Wipe it with a slightly damp soft cloth. Never use corrosive detergents, metal brushes, or abrasive sponges.

Are there safety precautions to follow?

Yes, wear gloves during assembly. Keep children and animals away during installation. Check the product condition regularly and replace it at the first signs of wear.

What are the included accessories?

The barrier comes with: 1 main metal grid, 2 side panels, 8 circular clamps, 4 bolts, 4 hand screws, 2 nylon straps, 2 straps, and 1 protective net.

Is the barrier compatible with all vehicles?

It is designed to fit most cars. First measure the available space and adjust the barrier. Six installation configurations are possible to accommodate different widths.

How to store the barrier when not in use?

Remove the C-clamps, take the barrier out of the vehicle, and store it in its original packaging or in a dry, dust-free place.

Where to find spare parts?

Contact Vevor technical support at www.vevor.com/support for spare parts.

Can I use the barrier with bucket seats?

Yes, but installation may require adjustment. Use the straps to secure the barrier to the headrests and check stability.

USER MANUAL SZJJZW01B Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

PET BARRIER FOR CAR

MODEL: SZJJZW01X/SZJJZW02X/SZJJSZW01/SZJJSZW02/SZJJZW01B

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

PET BARRIER FOR CAR

Technical diagram of a vehicle chassis with front and rear compartments, showing structural components and wiring (no text or labels)

SZJJZW01X/SZJJZW02X/SZJJZW01B

Diagram of three rectangular panels with circular elements on a grid background, no text or symbols present

SZJJSZW01/SZJJSZW02

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.

	Warning - To reduce the risk of injury, user must read instructions manual carefully.
	This symbol, placed before a safety comment, indicates a kind of precaution, warning, or danger. Ignoring this warning may lead to an accident. To reduce the risk of injury, fire, or electrocution, please always follow the recommendation shown below.
	Warning- Be sure to wear gloves when using this product.

WARNING

• Read these instructions carefully and retain them for future use.
• When using the product, basic safety precautions should always be followed to reduce the risk of injury including the followings: A competent adult should assemble the product.
• Keep children and pets away while assembling the product. Do not let children climb on or play with the product.
  ● Wear gloves when installing the product.
• Do not use this product if any parts are missing, damaged, or abrase. Do not over-tighten the fasteners(hardware). Regularly examine the product for wear and tear, replace at first sign of damage or if parts become detached.

CLEANING AND MAINTENANCE

● To clean the product, wipe with a soft, slightly moist cloth.
- Never use corrosive detergents, wire brushes, abrasive scourers metal or sharp utensils to clean the product.

PRODUCTION CONFIGURATION

Model	SZJJZW01X	SZJJZW02X	SZJJSZW01	SZJJSZW02	SZJJZW01B
Product size (inch)	35.4*16.5	38*16	38.5*15.9	36.6*16.5	35.4*16.5
Fold	Non foldable	Non foldable	Foldable	Foldable	Non foldable
Barrier net	✕	✕	✕	✕	✕

PARTS LIST

ITEM	Name	PICTURE	Model
			SZJJZW01X	SZJJZW02X	SZJJSZW01	SZJJSZW02	SZJJZW01B
A	Main metal mesh		1PCS	1PCS	1PCS	1PCS	1PCS
B	side panels		2PCS	2PCS	2PCS	2PCS	2PCS
C	circular clamps		8PCS	8PCS	8PCS	8PCS	8PCS
D	bolts		4PCS	4PCS	4PCS	4PCS	4PCS
E	Hand screw		4PCS	4PCS	4PCS	4PCS	4PCS
F	nylon straps		2PCS	2PCS	2PCS	2PCS	2PCS
G	straps		2PCS	2PCS	2PCS	2PCS	2PCS
H	Barrier net		×	×	×	×	1PCS
I	manual		1PCS	1PCS	1PCS	1PCS	1PCS

INSTALLATION INSTRUCTIONS

STEP 1:

Measure the dimensions of the interior mounting position of the car.

STEP 2:

Measure and adjust the barrier according to the width of the cargo area.

Two technical diagrams showing a vehicle's front and side views with grid background and circular components (no text or symbols)

STEP 3:

Re-assemble the barrier by fixing the Side Panels to the Main Panel with Screws and Nuts. Do not over-tighten or the hook will lose its shape. When installing C (circular clamps), pay attention to the fitting angle. The correct angle is to fit one side wall to both sides of the wall, and installation cannot be done at the wrong angle.

Unilateral wall and bilateral wall coordination

Two views of a mechanical component with black blades and red annotations highlighting features (no text or symbols present)

Close-up of hands holding a black plastic clip against a metal grid background (no text or symbols visible)

STEP 4:

Pre-fix the Straps to the headrests.

Close-up of hands using a mechanical tool to connect a black cable or wire component on a grid-patterned surface (no text visible)

Close-up of hands holding a black corrugated material with a metal clip (no text or symbols visible)

Close-up of a black plastic electronic component mounted on a metal frame, enclosed in a circular frame (no visible text or symbols)

STEP 5:

Install the barrier to the headrests.

Interior view of a car showing the backrest frame, seatbelt, and window (no visible text or symbols)

The product is equipped with 2 nylon straps, which users can choose to use according to their actual situation to fix the mesh.

Two parallel horizontal lines with curved ends and small circular connectors at the top (no text or symbols)

STEP 6:

The model SZJJZW01B product is equipped with a Barrier net, which is used for installation between the front seats. The two straps above the Barrier net are fixed to the headrests on both sides, and the straps below are fixed under the seat.

Simple line drawing of a vertical object with rounded sections and a small protrusion on top (no text or symbols)

Interior view of a car showing a dog behind a black net, with white leather seats and a dog partially visible inside (no text or symbols)

NOTE: The panels can be configured in 6 distinct ways, as pictured below, the way you need to set up the barrier depends on the size of the car.

Pure diagram of a rectangular frame with grid pattern and corner connectors (no text or symbols)

Pure diagram of two symmetrical mechanical components with no text or symbols

Pure diagram of a mechanical or structural component with grid pattern and two vertical supports (no text or symbols)

Diagram of two identical mechanical components with grid patterns and mounting holes, no text or symbols present.

Pure diagram of two identical rectangular shapes with internal dots and connecting lines, no text or symbols present.

Simple line drawing of two grid-patterned baskets with no text or symbols

PRODUCT STORAGE

Open the strapping, take it off the car, open the circular clamps and put a piece of protective net into the packing box, complete the storage of all items, or put it back in the carton packaging.

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical diagram of a vehicle chassis with two wheels and a curved roof, set on a grid background (no text or symbols)

SZJJZW01X/SZJJZW02X/SZJJZW01B

Diagram of a vehicle's front and rear panels with grid background and circular components (no text or symbols)

SZJJSZW01/SZJJSZW02

BESOIN D'AIDE? CONTACTEZ-NOUS!

ÉTAPE 2 :

Technical diagram showing two layout views of a vehicle or vehicle with grid background and colored components (no text or symbols)

ÉTAPE 3 :

Two views of a black plastic mechanical component with internal blades and mounting holes, shown from different angles (no text or symbols visible)

Close-up of hands holding a black plastic component against a grid background (no text or symbols visible)

ÉTAPE 4 :

Close-up of hands using a tool to cut a black plastic strip on a metal component (no text or symbols visible)

Close-up of hands using a pliers to cut a black corrugated material on a grid-patterned surface (no text or symbols visible)

Close-up of a black plastic electronic device with ribbed top, mounted on a metal frame (no visible text or symbols)

ÉTAPE 5 :

Interior view of a vehicle showing a black plastic car cover and side panel, with no visible text or symbols.

Two parallel horizontal decorative bars with curved ends and small leaf-like symbols on the left (no text or symbols)

ÉTAPE 6 :

Simple line drawing of a stylized object resembling a rocket or capsule with no text or symbols

A dog peeking through a wire cage in a white car seat, with no visible text or symbols.

C/O YH Consulting Limited Bureau 147,

Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

Technical diagram of a mechanical component with grid background and two circular features, no text or symbols present.

SZJJZW01X/SZJJZW02X/SZJJZW01B

Diagram of three rectangular panels with circular elements on a grid background, no text or symbols present

SZJJSZW01/SZJJSZW02

SCHRITT 2:

Two technical diagrams showing a vehicle's front and side views with grid background and circular components (no text or symbols)

SCHRITT 3:

Two black plastic fan components with internal blades, shown from different angles (no text or symbols visible)

Close-up of hands holding a black plastic component against a grid background (no text or symbols visible)

SCHRITT 4:

Close-up of hands using a tool to adjust or install a black cable or wire component (no visible text or symbols)

Close-up of hands holding a black corrugated metal strip with a metal clip (no text or symbols visible)

Close-up of a black plastic electronic component mounted on a metal frame, enclosed in a circular frame (no visible text or symbols)

SCHRITT 5:

Interior view of a vehicle showing a black plastic car cover and side panel, with no visible text or symbols.

Two parallel horizontal decorative bars with curved ends and small leaf-like symbols on the left (no text or symbols)

SCHRITT 6:

Illustration of a stylized animal character with open mouth and raised arms (no text or symbols)

A dog peeking through a wire cage into a white car seat, with no visible text or symbols.

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical diagram of a vehicle chassis with two wheels and a curved roof, set on a grid background (no text or symbols)

SZJJZW01X/SZJJZW02X/SZJJZW01B

Diagram of a vehicle's front and rear panels with grid background and circular components (no text or symbols)

SZJJSZW01/SZJJSZW02

PASSO 2:

Technical diagram showing two layout views of a vehicle or vehicle with grid background and colored components (no text or symbols)

PASSO 3:

Two black plastic fan components with internal blades, shown from different angles (no text or symbols visible)

Close-up of hands holding a black plastic component against a wire mesh background (no text or symbols visible)

PASSO 4:

Close-up of hands using a tool to adjust or install a black cable or wire component (no visible text or symbols)

Close-up of hands holding a black corrugated metal strip with a metal clip (no text or symbols visible)

Close-up of a black plastic electronic component mounted on a metal frame, enclosed in a circular frame (no visible text or symbols)

PASSO 5:

Interior view of a vehicle showing a black plastic car cover and side panel, with no visible text or symbols.

Two parallel horizontal decorative bars with curved ends and small leaf-like symbols on the left (no text or symbols)

PASSO 6:

Simple line drawing of a stylized object resembling a rocket or capsule (no text or symbols)

Interior view of a dog's seat with a cat peeking out of the window, no visible text or symbols

Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Importato negli USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

CONSULENZA YH LIMITATA.

C/O YH Consulting Limited Ufficio 147,

Casa del centurione, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

elettronica www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Diagram of a vehicle front view with grid background and two side-mounted sensors (no text or symbols)

SZJJZW01X/SZJJZW02X/SZJJZW01B

Diagram of three rectangular panels with circular elements on grid backgrounds, no text or symbols present

SZJJSZW01/SZJJSZW02

PASO 2:

Technical diagram showing two layout views of a vehicle or vehicle with grid background and colored components (no text or symbols)

PASO 3:

Two black plastic fan components with internal blades, shown from different angles (no text or symbols visible)

Close-up of hands holding a black plastic component against a wire mesh background (no text or symbols visible)

PASO 4:

Three circular images showing a hand using a tool to adjust a black mesh component, with no visible text or symbols.

PASO 5:

Interior view of a vehicle showing a black plastic car cover and side panel, with no visible text or symbols.

Two parallel horizontal decorative bars with curved ends and small leaf-like symbols on the left (no text or symbols)

PASO 6:

Simple line drawing of a stylized object resembling a rocket or capsule with no text or symbols

A dog peeking through a wire cage in a white car seat, with no visible text or symbols.

Casa Centurión, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

Diagram of a vehicle front view with grid background and two side-mounted sensors (no text or symbols)

SZJJZW01X/SZJJZW02X/SZJJZW01B

Diagram of three rectangular panels with circular elements on grid backgrounds, no text or symbols present

SZJJSZW01/SZJJSZW02

POTRZEBUJESZ POMOCY? SKONTAKTUJ SIE Z NAMI!

KROK 2:

Technical diagram showing two layout views of a vehicle or vehicle with grid background and colored components (no text or symbols)

KROK 3:

Two views of a black plastic fan with internal blades, one showing a blue arrow and red box highlighting features (no text or symbols)

Close-up of hands holding a black plastic component against a grid background (no text or symbols visible)

KROK 4:

Close-up of hands using a tool to adjust a black cable or wire component (no text or symbols visible)

Close-up of hands holding a black corrugated metal strip with a metal clip (no text or symbols visible)

Close-up of a black plastic electronic component mounted on a metal frame, enclosed in a circular frame (no visible text or symbols)

KROK 5:

Interior view of a vehicle showing a black plastic car cover and side panel, with no visible text or symbols.

Two parallel black decorative scrollwork handles with leaf motifs (no text or symbols)

KROK 6:

Illustration of a stylized animal character with open mouth and raised arms (no text or symbols)

A dog peeking through a wire cage in a white car seat, with no visible text or symbols.

C/O YH Consulting Limited Biuro 147,

Dom Centuriona, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt nad Menem.

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical diagram of a vehicle chassis with two wheels and a curved roof, set on a grid background (no text or symbols)

SZJJZW01X/SZJJZW02X/SZJJZW01B

Diagram of three rectangular panels with circular elements on a grid background, no text or symbols present

SZJJSZW01/SZJJSZW02

HULP NODIG? NEEM CONTACT MET ONS OP!

PRODUCTIECONFIGURATIE

STAP 2:

Technical diagram showing two layout views of a vehicle or vehicle with grid background and colored components (no text or symbols)

STAP 3:

Two views of a black plastic fan component with internal blades, shown from different angles (no text or symbols visible)

STAP 4:

Three circular images showing a hand using a tool to adjust a black mesh component, with no visible text or symbols.

STAP 5:

Interior view of a vehicle showing a black plastic car cover and a side panel, with no visible text or symbols.

Two parallel horizontal decorative bars with curved ends and small leaf-like symbols on the left (no text or symbols)

STAP 6:

Simple line drawing of a stylized object resembling a rocket or capsule (no text or symbols)

Interior view of a dog's seat with a cat peeking out of the window, no visible text or symbols

C/O YH Consulting Limited Kantoor 147,

Centurionhuis, Londenweg,

Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

garantiecertificaat www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Diagram of a vehicle front view with grid background and two side-mounted sensors (no text or symbols)

SZJJZW01X/SZJJZW02X/SZJJZW01B

Diagram of three rectangular panels with circular elements on a grid background, no text or symbols present

SZJJSZW01/SZJJSZW02

BEHÖVER HJÄLP? KONTAKTA OSS!

STEG 2:

Technical diagram showing two layout views of a vehicle or vehicle frame with grid background and circular components (no text or symbols)

STEG 3:

Two views of a black plastic fan component with internal blades and mounting holes, shown from different angles (no text or symbols visible)

Close-up of hands holding a black plastic component against a grid background (no text or symbols visible)

STEG 4:

Close-up of hands using a tool to cut a black plastic strip on a metal component (no text or symbols visible)

Close-up of hands using a tool to cut a black corrugated material on a grid-patterned surface (no text or symbols visible)

Close-up of a black plastic electronic device with ribbed top, mounted on a metal frame (no visible text or symbols)

STEG 5:

Interior view of a vehicle showing a black plastic car cover and side panel, with no visible text or symbols.

Two parallel black decorative scrollwork handles with leaf motifs (no text or symbols)

STEG 6:

Illustration of a stylized animal character with open mouth and raised arms (no text or symbols)

A dog peeking through a wire cage in a white car seat, with no visible text or symbols.

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support