WK320016 - Bathroom accessory Vevor - Free user manual and instructions

Find the device manual for free WK320016 Vevor in PDF.

Vevor WK320016 - Bathroom accessory
📄 64 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Vevor WK320016 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Tension Pole Shower Corner Caddy
Brand Vevor
Model WK320016 / WK320016-1 / WK320016-2
Available Colors Black (WK320016), Bronze (WK320016-1), Silver (WK320016-2)
Number of Trays 3 fan-shaped trays
Maximum Capacity per Tray 5.4 kg
Adjustable Height Range 99 to 318 cm (39 to 125 inches)
Installation Mechanism Spring pole, no drilling (between floor and hard ceiling)
Main Material Stainless steel or aluminum (depending on model)
Recommended Use Bathroom, shower, product storage
Moisture Resistance Yes, designed for humid environment
Maintenance and Cleaning Wipe with a soft damp cloth; avoid abrasive cleaners
Safety Do not exceed 5.4 kg per tray; check stability after installation
Spare Parts and Repairability Spare parts available through Vevor after-sales service
Warranty Electronic warranty via www.vevor.com/support
Country of Origin China (manufactured by Shanghaimuxinmuyeyouxiangongsi)

Frequently Asked Questions - WK320016 Vevor

How to install the Vevor WK320016 shower corner caddy?
Installation is done without drilling: place the pole between the floor and a hard ceiling (tile, wood). Adjust the height by sliding the tubes (coarse adjustment) and turning the adjustment rod to compress the spring by 50 to 80 mm. Then tighten the rod. Refer to the diagram in the manual.
What is the maximum load capacity per tray?
Each tray can support up to 5.4 kg. Do not exceed this limit to avoid any risk of tipping or damage.
Is this caddy suitable for all types of ceilings?
No, the product requires a hard ceiling (tile, concrete, wood). For aluminum loop ceilings or other non-rigid surfaces, installation may be impossible or dangerous.
How to adjust the height of the pole?
There are two adjustments: a coarse adjustment by adding/removing tube sections (A/B), and a fine adjustment by turning the D rod in the indicated direction to loosen, adjust the length, then tighten by turning in the opposite direction. Spring compression should be about 50 to 80 mm.
What materials are used?
The caddy is made of metal (stainless steel or aluminum depending on model) with a rust-resistant finish. The trays are fan-shaped, often made of metal coated with epoxy paint.
How to clean and maintain this product?
Clean regularly with a soft damp cloth. Avoid abrasive cleaners or those containing alcohol that could damage the coating. Dry after cleaning to avoid limescale marks.
Does the caddy come with additional accessories?
The package contains the poles (rods A, B, C, D), three fan-shaped trays, fixing screws, and an instruction manual. Check the parts list in the manual before installation.
Can I use this caddy in a covered outdoor environment?
This product is designed for indoor use, mainly in the bathroom. Prolonged exposure to UV or outdoor humidity could accelerate corrosion.
What if the pole is not long enough for my ceiling?
The height range is 99 to 318 cm. If your ceiling is higher, contact Vevor support for optional extensions. Never force the spring beyond its capacity.
How to contact Vevor after-sales service?
Visit www.vevor.com/support for technical assistance, to download the electronic warranty, or to order spare parts.

User questions about WK320016 Vevor

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

Your email remains private: it is only used to notify you if someone answers your question.

No questions yet. Be the first to ask one.

Download the instructions for your Bathroom accessory in PDF format for free! Find your manual WK320016 - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WK320016 by Vevor.

USER MANUAL WK320016 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

SHOWER CORNER CADDY TENSION POLE

MODEL: WK320016/ WK320016-1/ WK320016-2

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent estimate of savings you might benefit from buying certain tools with us compared to top brands and does not necessarily mean to cover all categories of tools offered. We kindly remind you to verify carefully when you are placing an order with us that you are actually saving half in comparison with the top major brands.

MODEL: WK320016/ WK320016-1/ WK320016-2

Pure vertical line diagram with four curved grid-like shapes on both sides, no text or symbols present.

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you if there are any technology or software updates on our product.

Vevor WK320016 - NEED HELP? CONTACT US! - 1

Warning - To reduce the risk of injury, the user must read the instructions manual carefully.

WARNING

- The product is fixed in front of the ground and ceiling by the built-in spring structure. Before use, confirm that the installation position is a ceiling. For non-hard ceilings (such as aluminum buckle ceilings), the product may not be able to be installed and used properly.

- Fan shaped and square trays (excluding soap holders), the weight of items placed on a single tray must not exceed 5.4kg.

PRODUCTION CONFIGURATION

ModelWK320016WK320016-1WK320016-2
Height range (in)39-125
Single tray load-bearing capacity (kg)5.4
Tray3 layers, fan-shaped
ColourBlackBronzeSilvery

PARTS LIST

Vevor WK320016 - WARNING - 1Vevor WK320016 - WARNING - 2B=Vevor WK320016 - WARNING - 3Vevor WK320016 - WARNING - 4Vevor WK320016 - WARNING - 5
Vevor WK320016 - WARNING - 6F=1xVevor WK320016 - WARNING - 7G=1xVevor WK320016 - WARNING - 8H=1xVevor WK320016 - WARNING - 9I=1xVevor WK320016 - WARNING - 10 = 4x

INSTALLATION INSTRUCTIONS

1Vevor WK320016 - INSTALLATION INSTRUCTIONS - 12Vevor WK320016 - INSTALLATION INSTRUCTIONS - 23Vevor WK320016 - INSTALLATION INSTRUCTIONS - 34Vevor WK320016 - INSTALLATION INSTRUCTIONS - 45Vevor WK320016 - INSTALLATION INSTRUCTIONS - 56Vevor WK320016 - INSTALLATION INSTRUCTIONS - 67
8↓Vevor WK320016 - INSTALLATION INSTRUCTIONS - 7- Vevor WK320016 - INSTALLATION INSTRUCTIONS - 810PiVevor WK320016 - INSTALLATION INSTRUCTIONS - 911Vevor WK320016 - INSTALLATION INSTRUCTIONS - 1012Vevor WK320016 - INSTALLATION INSTRUCTIONS - 1113Vevor WK320016 - INSTALLATION INSTRUCTIONS - 1214Vevor WK320016 - INSTALLATION INSTRUCTIONS - 13

Height adjustment instructions

  1. Coarse adjustment: The user confirms the installation position, the distance between the ceiling and the ground, and adapts by increasing or decreasing the number of A/B poles.
  2. By adjusting the length of the D rod inserted into the C rod, ensure that spring compression is approximately 50-80mm.

Rotate the D-rod in the direction shown in the diagram to loosen it, adjust to the appropriate length, and then rotate it in the opposite direction to tighten it.

D C D D

Overall installation

D

Complete installation

Manufacturer: Shanghai Muxin Muye Youxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, Baoshanqu, Shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW : Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UKREP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

ECREP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

C/O YH Consulting Limited Bureau 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

REPRESENTING CE

E-CrossStu GmbH

Mainzer Landstr.69,

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

Vevor WK320016 - NEED HELP? CONTACT US! - 2

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

Imported in AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

REP.CE

E-CrossStu GmbH

Mainzer Landstr.69,

electronics www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

REPRESENTATIVE OF THE EC

E-CrossStu GmbH

Mainzer Landstr.69,

NEED HELP? CONTACT US!

PRODUCTION CONFIGURATION

Simple line drawing of a mechanical tool with a labeled dimension D=1x (no text or symbols on the object itself).

E=3xVevor WK320016 - TOUGH TOOLS, HALF PRICE - 3

Vevor WK320016 - TOUGH TOOLS, HALF PRICE - 4F=1xVevor WK320016 - TOUGH TOOLS, HALF PRICE - 5G=1xVevor WK320016 - TOUGH TOOLS, HALF PRICE - 6H=1xVevor WK320016 - TOUGH TOOLS, HALF PRICE - 7I=1xVevor WK320016 - TOUGH TOOLS, HALF PRICE - 8 =4x

INSTALLATION INSTRUCTIONS

graph TD A["①"] --> B["②"] B --> C["③"] C --> D["④"] D --> E["⑤"] E --> F["⑥"] F --> G["⑦"] H["⑧"] --> I["⑨"] I --> J["⑩"] J --> K["⑪"] K --> L["⑫"] L --> M["⑬"] M --> N["⑭"] N --> O["⑮"] O --> P["⑯"] style A fill:#f9f,stroke:#333 style B fill:#f9f,stroke:#333 style C fill:#f9f,stroke:#333 style D f…

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

REPREZENT KE

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical support and e-warranty certificate www.vevor.com/support

SHOWER CORNER CADDY TENSION POLE

MODEL: WK320016/ WK320016-1/ WK320016-2

NEED HELP? CONTACT US!

PRODUCT CONFIGURATION

INSTALLATION INSTRUCTIONS

graph TD A["①"] --> B["②"] B --> C["③"] C --> D["④"] D --> E["⑤"] E --> F["⑥"] F --> G["⑦"] H["⑧"] --> I["⑨"] I --> J["⑩"] J --> K["⑪"] K --> L["⑫"] L --> M["⑬"] M --> N["⑭"] N --> O["⑮"] O --> P["⑯"] P --> Q["⑰"] style A fill:#f9f,stroke:#333 style B fill:#f9f,stroke:#333 style C fill:#f9f,stroke:#…

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

EG REP

E-CrossStu GmbH

Mainzer Landstr. 69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

Warranty certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

ECREP

E-CrossStu GmbH

Mainzer Landstr. 69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Vevor

Model : WK320016

Category : Bathroom accessory