RK010 - Yoga accessory Vevor - Free user manual and instructions

USER MANUAL RK010 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

STANDING YOGA STAND WITH BASKET

MODEL: RK010

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually Saving Half in comparison with the top major brands.

MODEL: RK010

Technical line drawing of a multi-level metal shelving unit with wheels and structural brackets (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.

SAFETY PRECAUTIONS

WARNING: Read this material before using this product. Failure to do so can result in serious injury.

Assembly precautions

1. Assemble only according to these instructions. Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Keep assembly area clean and well lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or when under the influence of alcohol, drugs or medication.

Use precautions

1. Over load is strictly prohibited.
2. Don't move too fast when passing potholes areas.
3. This product is not a toy. Do not allow children to play with or near this item.
4. Do not lift while loaded.
5. Use as intended only.
6. Inspect before every use; do not use if parts are loose or damaged.
7. Do not wash products or put it in any damp place.

SAVE THESE INSTRUCTIONS

PARAMETER

Model Product Size		Product layers and load-bearing capacity
RK010 870*405*1010±10mm		Bottom: 80(lbs);Second layer: 40(lbs);Third layer: 40(lbs);Top layer: 40(lbs)

ACCESSORIES

No.	1	2	3	4	5	6	7
Parts
Qty	1pc	1pc	1pc	1pc	5pcs	2pcs	1pc

No.	8	9	10	11	12	A	B	C	D
Parts			[ZSD4]			M6*30	[ATKA]	[2YH0]
Qty	1pc	1pc	2pcs	2pcs	2pcs	26pcs	2pcs	2pcs	1pc

①

From this step, only need to lock half the depth of each screw

4 10 D Ax2pcs 9 Ax2pcs

② 6 7 8 1 5 3 D A Ax7pcs

3

5 D A Ax4pcs

4 2 D A Ax 7 pcs

⑤ D A Ax4pcs After completing this step, all screws need to be tightened

⑥

12 The width of the rods can be adjusted according to the size of the dumbbells

⑦

Technical line drawing of a multi-tiered metal shelving unit with perforated panels and circular cutouts (no text or symbols)

⑧ C x2pcs Bx2pcs

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main.

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical line drawing of a multi-level metal shelving unit with wheels and circular cutouts (no text or symbols)

BESOIN D'AIDE ? CONTACTEZ-NOUS !

www.vevor.com/support

From this step, only need to lock half the depth of each screw

4 D 10 Ax2pcs 9 Ax2pcs

ÉTAPE 2

② 6 7 8 1 5 3 D A Ax7pcs

ÉTAPE 3

③ 5 D A Ax4pcs

ÉTAPE 4

④ 2 D A Ax 7 pcs

ÉTAPE 5

⑤ D A Ax4pcs After completing this step, all screws need to be tightened

ÉTAPE 6

⑥

12 The width of the rods can be adjusted according to the size of the dumbbells

ÉTAPE 7

⑦

Technical line drawing of a multi-tiered metal shelving unit with circular cutouts and ventilation grilles (no text or symbols)

ÉTAPE 8

⑧ C x2pcs Bx2pcs

Fabricant: Shanghaimuxinmuyeyouxiangongsi

Adresse : Shuangchenglu 803nong11hao1602A-1609shi, Baoshanqu, Shanghai 200000 CN.

Importé en Australie : SIHAO PTY LTD. 1 ROKEVA STREET, ASTWOOD NSW 2122, Australie

A/S YH Consulting Limited Bureau 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical line drawing of a multi-level metal shelving unit with wheels and circular cutouts (no text or symbols)

From this step, only need to lock half the depth of each screw

4 D 10 Ax2pcs 9 Ax2pcs

SCHRITT 2

② 6 7 8 1 5 3 D A Ax7pcs

SCHRITT 3

③ 5 D A Ax4pcs

SCHRITT 4

④ 2 D A Ax 7 pcs

SCHRITT 5

⑤ D A Ax4pcs After completing this step, all screws need to be tightened

SCHRITT 6

⑥

12 The width of the rods can be adjusted according to the size of the dumbbells

STEP7

⑦

Technical line drawing of a multi-tiered metal shelving unit with circular cutouts and ventilation grilles (no text or symbols)

SCHRITT 8

⑧ C x2pcs Bx2pcs

Hersteller: Shanghaimuxinmuyeyouxiangongsi

Adresse: Shuangchenglu 803nong11hao1602A-1609shi, Baoshanqu, Shanghai 200000 CN.

C/O YH Consulting Limited, Büro 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical line drawing of a multi-level metal shelving unit with wheels and circular cutouts (no text or symbols)

From this step, only need to lock half the depth of each screw

4 D 10 Ax2pcs 9 Ax2pcs

PASSO 2

② 6 7 8 1 5 3 D A Ax7pcs

PASSO 3

③ 5 D A Ax4pcs

PASSO4

4 2 D A Ax 7 pcs

PASSO 5

⑤ D A Ax4pcs After completing this step, all screws need to be tightened

PASSO6

⑥

12 The width of the rods can be adjusted according to the size of the dumbbells

PASSO 7

⑦

Technical line drawing of a multi-tiered metal shelving unit with circular cutouts and ventilation grilles (no text or symbols)

PASSO 8

⑧ C x2pcs Bx2pcs

Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Importato negli USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Francoforte sul Meno.

UK

REP

CONSULENZA YH LIMITATA.

C/O YH Consulting Limited Ufficio 147, Centurion House, Via Roma, 101, 00186 Roma, Italia

VEVOR®

TOUGH TOOLS, HALF PRICE

elettronica www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical line drawing of a multi-level metal shelving unit with wheels and compartments (no text or symbols)

From this step, only need to lock half the depth of each screw

4 D 10 Ax2pcs 9 Ax2pcs

PASO 2

② 6 7 8 1 5 3 D A Ax7pcs

PASO 3

③ 5 D A Ax4pcs

PASO 4

④ 2 D A Ax 7 pcs

PASO 5

⑤ D A Ax4pcs After completing this step, all screws need to be tightened

PASO 6

⑥

12 The width of the rods can be adjusted according to the size of the dumbbells

PASO 7

⑦

Technical line drawing of a multi-tiered metal shelving unit with circular cutouts and ventilation grilles (no text or symbols)

PASO 8

⑧ C x2pcs Bx2pcs

Fabricante: Shanghaimuxinmuyeyouxiangongsi

Dirección: Shuangchenglu 803nong11hao1602A-1609shi, Baoshanqu, Shanghai 200000 CN.

Importado a AUS: SIHAO PTY LTD. 1 ROKEVA STREET, EASTWOOD, NSW 2122, Australia

Importado a EE. UU.: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

C/O YH Consulting Limited Oficina 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical line drawing of a multi-level metal shelving unit with wheels and circular cutouts (no text or symbols)

POTRZEBUJESZ POMOCY? SKONTAKTUJ SIĘ Z NAMI!

From this step, only need to lock half the depth of each screw

4 D 10 Ax2pcs 9 Ax2pcs

KROK 2

② 6 7 8 1 5 3 D A Ax7pcs

KROK 3

③ 5 D A Ax4pcs

KROK 4

④ 2 D A Ax 7 pcs

KROK 5

⑤ D A Ax4pcs After completing this step, all screws need to be tightened

KROK 6

⑥

12 The width of the rods can be adjusted according to the size of the dumbbells

KROK 7

⑦

Technical line drawing of a multi-level metal shelving unit with grid and ventilation panels (no text or symbols)

KROK 8

⑧ C x2pcs Bx2pcs

Producent: Shanghaimuxinmuyeyouxiangongsi

Adres: Shuangchenglu 803nong11hao1602A-1609shi, Baoshanqu, Szanghaj 200000 CN.

Importowane do AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Importowane do USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt nad Menem.

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Biuro 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical line drawing of a multi-level metal shelving unit with wheels and circular cutouts (no text or symbols)

HULP NODIG? NEEM CONTACT MET ONS OP!

www.vevor.com/support

From this step, only need to lock half the depth of each screw

4 D 10 Ax2pcs 9 Ax2pcs

STAP 2

② 6 7 8 1 5 3 D A Ax7pcs

STAP 3

③ 5 D A Ax4pcs

STAP 4

④ 2 D A Ax 7 pcs

STAP 5

⑤ D A Ax4pcs After completing this step, all screws need to be tightened

STAP 6

⑥

12 The width of the rods can be adjusted according to the size of the dumbbells

STAP 7

⑦

Technical line drawing of a multi-tiered metal shelving unit with circular cutouts and ventilation grilles (no text or symbols)

STAP 8

⑧ C x2pcs Bx2pcs

Fabrikant: Shanghaimuxinmuyeyouxiangongsi

Adres: Shuangchenglu 803nong11hao1602A-1609shi, Baoshanqu, Shanghai 200000 CN.

C/O YH Consulting Limited Kantoor 147, Centurion House, Londen Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

garantiecertificaat www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical line drawing of a multi-level metal shelving unit with wheels and circular cutouts (no text or symbols)

BEHÖVER HJÄLP? KONTAKTA OSS!

www.vevor.com/support

From this step, only need to lock half the depth of each screw

4 D 10 Ax2pcs 9 Ax2pcs

STEG 2

② 6 7 8 1 5 3 D A Ax7pcs

STEG 3

③ 5 D A Ax4pcs

STEG 4

④ 2 D A Ax 7 pcs

STEG 5

⑤ D A Ax4pcs After completing this step, all screws need to be tightened

STEG 6

⑥

12 The width of the rods can be adjusted according to the size of the dumbbells

STEG 7

⑦

Technical line drawing of a multi-tiered metal shelving unit with circular cutouts and ventilation grilles (no text or symbols)

STEG 8

⑧ C x2pcs Bx2pcs

Tillverkare: Shanghaimuxinmuyeyouxiangongsi

Adress: Shuangchenglu 803nong11hao1602A-1609shi, Baoshanqu, Shanghai 200000 CN.

Importerad till AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australien

Importerad till USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main.

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support