RL-LG006 - Truck accessories Vevor - Free user manual and instructions

Product Type	Truck Wheel Cover and Lug Nut Cover Kit
Model	RL-LG006
Brand	Vevor
Material	Stainless Steel
Rim Compatibility	20, 22.5, and 24.5 inch rims with 10 holes and 11.25 inch bolt circle
Kit Contents	6 complete sets: 2 front wheel covers, 4 rear wheel covers, 20 lug nut covers, 1 tightening sleeve
Main Function	Protection and aesthetic enhancement of wheel hubs
Installation	Screw onto existing hub bolts, tighten using the provided sleeve
Precautions	Check that wheel bolt threads protrude at least 8 mm; remove existing decorations before installation
Maintenance and Cleaning	Clean with a soft cloth and soapy water; avoid abrasives
Safety	Use the provided anti-loosening clips; do not reuse clips after removal
Spare Parts and Repairability	Lug nut covers and caps are sold separately; contact support for parts
Warranty	Electronic warranty via www.vevor.com/support
General Information	Manufactured by Shanghai Xinmu YeYou Xiangsi, imported into EU/USA/Australia

Frequently Asked Questions - RL-LG006 Vevor

Is this kit compatible with my truck?

Check that your rims are 20, 22.5, or 24.5 inches, with 10 holes and a 11.25 inch bolt circle. Wheel hub bolts must protrude at least 8 mm.

How many sets does the RL-LG006 pack contain?

The RL-LG006 kit contains 6 complete sets: 2 front caps, 4 rear caps, 20 lug nut covers, and 1 tightening sleeve.

How to install the wheel caps?

Align the cap holes with the hub bolts, hand-tighten the lug nut covers, then tighten with the provided sleeve. Insert a force rod into the small hole of the sleeve for optimal tightening.

Can I reuse the anti-loosening clips after removal?

No, the anti-loosening clips may be damaged during removal. It is recommended to replace them to ensure proper hold.

How to maintain the stainless steel caps?

Clean them with a soft cloth and soapy water. Avoid abrasive or acidic products that could scratch the surface.

What if I lose a lug nut cover?

You can order replacement lug nut covers from Vevor. Visit www.vevor.com/support for spare parts.

Is this kit suitable for front and rear wheels?

Yes, the RL-LG006 includes 2 front caps and 4 rear caps, covering all wheels of a standard 6-wheel truck.

Do I need to remove existing decorations before installation?

Yes, if you have decorative hubcaps or lug nut covers, remove them before installing this kit to ensure proper fit.

What is the warranty for this product?

Vevor offers an electronic warranty. Register your product at www.vevor.com/support to access technical support and warranty.

Is the tightening sleeve included?

Yes, each RL-LG006 kit contains a tightening sleeve. Use it to tighten the lug nut covers after installation.

USER MANUAL RL-LG006 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

SEMI TRUCK HUB COVERS

MODEL: RL-LG001/ RL-LG002/ RL-LG003/ RL-LG004 RL-LG005/ RL-LG006

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent the estimate of savings you might benefit from buying certain tools with us compared to top brands and does not necessarily mean to cover all categories of tools offered. Are kindly reminded to verify carefully when you are placing an order with us actually saving half in comparison with the top major brands.

VEVOR

TOUGH TOOLS, HALF PRICE

STAINLESS STEEL EXHAUST MANIFOLD

MODEL: RL-LG001/ RL-LG002/ RL-LG003/

RL-LG004 RL-LG005/ RL-LG006

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instruction carefully before operating. VEVOR reserves a clear interpretation user manual. The appearance of the product shall be subject to product you received. Please forgive us that we won't inform you there are any technology or software updates on our product.

Warning - To reduce the risk of injury, the user must read the instructions manual carefully.

WARNING

• Before purchasing this product, please confirm that there are threads on the wheel hub bolts of the truck that protrude from the nut (because the product cover is fastened to the wheel through the original wheel hub thread). Protruding screw threads with a length greater than 8 mm are required. If you have modified the axle cover and nut cover decorations, please remove the original decorations before installation.

Screw thread with a nut protruding part

Screw thread without a protruding nut part

The added shaft cover needs to be removed

The added nut decorative cover needs to be removed

• When installing the product, the nut cover and shaft cover are equipped with anti-loss clamps. Disassembling the product may damage the clamps, which may affect the second installation and use.

PRODUCTION CONFIGURATION

Model	RL-LG001	RL-LG002	RL-LG003	RL-LG004	RL-LG005	RL-LG002
Adapt to wheel rims	Rims of 20-inch, 22.5-inch, and 24.5-inch with 10 holes and 11.25-in positioning circle
Type	Dome shaped			Spike type
Quantity	2 SET	4 SET	6 SET	2 SET	4 SET	6 SET

PARTS LIST

Model	RL-LG001	RL-LG002	RL-LG003	RL-LG004	RL-LG005	RL-LG006
Total quantity	2 SET	4 SET	6 SET	2 SET	4 SET	6 SET
Front wheel cover	2 SET	None	2 SET	2 SET	None	2 SET
Rear wheel cover	None	4 SET	4 SET	None	4 SET	4 SET
Nut cover	20 PCS	40 PCS	60 PCS	20 PCS	40 PCS	60 PCS
Sleeve	1 PCS	1 PCS	1 PCS	1 PCS	1 PCS	1 PCS

INSTALLATION INSTRUCTIONS

1. Install the axle cover onto the surface of the wheel rim, aligning the axle cover with the hub bolts.

1. Hand tighten all nut covers onto the bolts of the wheel hub.

3. Use the matching sleeve to tighten all nut covers, which can be tightened by adding a force rod through the small hole at the end of the sleeve.

4. Complete the installation (as shown below), and use the same method to install the front and rear wheels.

Manufacturer: Shanghai Xinmu Ye You Xiang Gong Si

Address: Shuangchenglu 803nong11hao1602A-1609shi, Baoshanqu, Shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical support and electronic warranty certificate www.vevor.com/support

SEMI-TRUCK HUB CAPS

MODEL: RL-LG001/RL-LG002/RL-LG003/

RL-LG004 RL-LG005/ RL-LG006

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR

TOUGH TOOLS, HALF PRICE

Imported in AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr. 69,

60329 Frankfurt am Main.

VEVOR

TOUGH TOOLS, HALF PRICE

electronics www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical support and electronic warranty certificate www.vevor.com/support

Centurion House, London Road,

Staines upon Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

PRODUCTION CONFIGURATION

Place, Rancho Cucamonga, California 91730

YH CONSULTING LIMITED LIABILITY COMPANY

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR

TOUGH TOOLS, HALF PRICE

Technical support and e-warranty certificate www.vevor.com/support

SEMI TRUCK HUB CAPS

MODEL: RL-LG001/ RL-LG002/ RL-LG003/ RL-LG004 RL-LG005/RL-LG006

NEED HELP? CONTACT US!

PRODUCT CONFIGURATION

Model	RL-LG001 RL-LG002 RL-LG003 RL-LG004 RL-LG005 RL-LG002
Aanpassen aan wieI velgen	Velgen van 20 inch, 22,5 inch en 24,5 inch met 10 gaten en 11,25 inch gatpositionering cirkel
Type	Koepelvormig			Spike-type
Aantal 2 SET		4 INSTellenEN	6 INSTellenEN	2 INSTellenEN	4 INSTellenEN

PARTS LIST

INSTALLATION INSTRUCTIONS

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR

TOUGH TOOLS, HALF PRICE

warranty certificate www.vevor.com/support

VEVOR

TOUGH TOOLS, HALF PRICE

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR

TOUGH TOOLS, HALF PRICE

www.vevor.com/support