PC-50 - Crepe maker Vevor - Free user manual and instructions

Product Type	Commercial Crepe Maker
Brand	Vevor
Model	PC-50
Power	1700 W
Power Supply Voltage	120 V (North America) / 220-240 V (Europe, Australia)
Frequency	60 Hz (NA) / 50 Hz (EU, AU)
Plug Type	American / European / Australian depending on region
Coating	Non-stick
Temperature Control	Yes, via rotary knob
Heating Indicator Light	Yes, turns on/off based on temperature
Timer	Yes, adjustable (recommended 5 min at 200°C)
Housing Material	Stainless steel and heat-resistant plastic
Usage	Indoor only
Maintenance	Clean with a soft brush; do not use abrasives
Safety	Unplug after use; do not immerse; do not leave unattended
Dimensions (approx.)	40 x 30 x 15 cm
Weight (approx.)	4.5 kg
Warranty	Technical support via www.vevor.com/support
Spare Parts	Available through Vevor after-sales service

Frequently Asked Questions - PC-50 Vevor

Why does my crepe maker emit a slight smoke or smell on first use?

This is normal for new heating appliances. It disappears after a few minutes of heating. Make sure to ventilate the room well.

What temperature should I use to cook crepes?

Set the thermostat to 200°C (400°F) for optimal results. The indicator light turns off when temperature is reached.

What should I do if the batter sticks to the plate?

Add a bit more oil or butter to the batter. The plate is non-stick, but extra oil helps prevent sticking.

How to clean the crepe maker after use?

Wait for complete cooling, then use a soft brush to remove residue. Wipe the exterior with a dry cloth. Never immerse the appliance in water.

Can I use the crepe maker outdoors?

No, this appliance is designed for indoor use only. Do not expose it to moisture or outdoor conditions.

How to store the crepe maker?

Unplug it, clean it, make sure it is completely cooled and dry, then store it in a dry and safe place.

What if the power cord is damaged?

It must be replaced by the manufacturer, a service agent, or a qualified person to avoid any hazard. Do not use the appliance with a damaged cord.

Can the crepe maker be used unattended?

No, never leave it unattended during use. Keep it out of reach of children and pets.

What is the electrical power of the PC-50 crepe maker?

The power is 1700 W. Make sure your outlet voltage matches the label (120V or 220-240V).

Where to find spare parts or technical support for this model?

Visit the website www.vevor.com/support for technical support and electronic warranty. Spare parts can be ordered through after-sales service.

USER MANUAL PC-50 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

We continue to be committed to provide you with tools at competitive prices. "Save Half", "Half Price" or any other similar expressions used by us only represent savings you might benefit from buying certain tools with us compared to top brands, and does not necessarily mean to cover all categories of tools offered. We kindly remind you to verify carefully when placing an order with us to ensure you are actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

MODEL: PC-50

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate

www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The application of the product shall be subject to the product you received. Please forgive us and inform you again if there are any technology or software updates on our product.

	Warning-To reduce the risk of injury, user must read instructi manual carefully.
	Indoor use only.
	Pay attention to high temperatures to prevent burns.
	CORRECT DISPOSALThis product is subject to the provision of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed throu indicates that the product requires separate refuse collection i European Union. This applies to the product and all accesso marked with this symbol. Products marked as such may not discarded with normal domestic waste, but must be taken to collection point for recycling electrical and electronic devices
	Compliance is a EC & UK security certification.

SAFETY WARNINGS AND PRECAUTIONS

Thank you for using this product. In order to make sure that you can operate the machine correctly, read this instruction carefully before operating it and keep it properly for future reference. Please read this page's precautions and safety rules to ensure your safe use. This manual will outline safety warnings, precautions for operating, maintenance, and cleaning. The warnings and instructions reviewed in this manual cannot cover all possible conditions and situations that may occur. Caution and common sense are not built into this product since the users will comply with these codes. Please consult a doctor before starting a training program or engaging in strenuous endurance activity on the device.

Please read ALL the instructions before using your machine.

1. Ensure the voltage in your outlet is the same as indicated on the appliance rating label.
2. Do not let minors and pets get close to or touch the machine.
3. Do not touch the hot surface directly with your hands. Always use the hat knob for operation.
4. Do not immerse the cord or plug into water or other liquids to prevent electric shock.
5. Do not immerse the appliance in water or any other liquid.
6. Unplug the machine from the outlet when not in use and before cleaning. Unplug the appliance before installing or removing parts and before cleaning.
7. Cool down the HOT parts before operation and cleaning.
8. Do not operate the device with a damaged cord or plug, malfunctioning, or mechanical damage. Send it to your nearest authorized service centre for examination and repair (ONLY technicians should open the unit).
9. Using accessories or attachments not provided or recommended by the manufacturer may cause injury.
10. If the machine is not to be used for an extended period, unplug it, clean it, cover it, and store it in a dry and safe place.
11. Do not leave the power cord hanging over the edge of a table or counter, and do not let it come into contact with any hot surfaces.
12. Do not place the unit on or near hot air, electric burners, or heaters. Always switch off the power to the socket before plugging in or unplugging. Hold the plug instead of pulling on the cord.
13. Do not apply this unit to purposes other than the indicated usage.
14. KEEP IT OUT OF CHILDREN'S REACH. Never leave it unattended while in use.
15. DO NOT CLEAN IT WITH ANY ABRASIVE MATERIAL.
16. Always check that this machine is plugged into a grounded outlet with the appropriate electrical supply. Ensure that the wall outlet being used is adequately grounded. If not, you must install a grounded outlet. Have the work performed by a certified electrician appropriately qualified to meet local safety and electric codes.
17. Regularly check that the power outlet, plug, and cord in use are in good working condition. Any damaged components should be promptly repaired by a certified electrician who is qualified to meet local safety and electrical codes. Even if your power cord is functioning properly, it's important to keep it away from water and avoid letting it run over carpets or heating devices to prevent potential hazards.
18. It is absolutely prohibited to use this machine in the presence of flammable liquids, gases, dust, or any other explosive situation. This strict rule is in place to ensure your safety and prevent potential accidents.
19. Do not move the machine before cooling and during heating.
20. Do not operate the machine in an appliance garage or under a wall cabinet. Always unplug the unit from the electrical outlet when storing it in an appliance garage. Otherwise, it would cause a fire risk, especially if the machine touches the garage wall or the door touches it as it closes.
21. Type Y attachment: If the supply cord is damaged, it must be replaced by the manufacturer, service agent, or similarly qualified persons to avoid a hazard.
22. Children shall not play with the appliance. Children shall not clean and user maintenance without supervision.
23. Inspect before every use.
24. DO NOT CLEAN IT WITH ANY ABRASIVE MATERIAL.
25. Never leave it unattended while in use. Never leave the child unattended.
26. Pet urine and feces can damage the product, please keep away.

WARNING:

This appliance is not intended for use by young or infirm persons unless supervised by a responsible person to ensure that they can use the appliance safely. Young children should be supervised to ensure that they do not play with the product. Pets should stay away from the product.

PRODUCT PARAMETERS

MODEL	Region	Voltage	Power	Plug Type
PC-25-2	NorthAmerica	AC120V 60Hz	1700W	American PLUG
	Europe	AC220-240V 50Hz		European PLUG
	Australia	AC220-240V 50Hz		Australia PLUG
PC--9	NorthAmerica	AC120V 60Hz	850W	American PLUG
	Europe	AC220-240V 50Hz		European PLUG
	Australia	AC220-240V 50Hz		Australia PLUG
PC-50	NorthAmerica	AC120V 60Hz	1700W	American PLUG
	Europe	AC220-240V 50Hz		European PLUG
	Australia	AC220-240V 50Hz		Australia PLUG

Attention:

1. Please use an appropriate external power supply according to the product voltage.
2. Do not exceed the maximum load specified in the product manual.

OPERATING INSTRUCTIONS

Before using the appliance for the first time, peel off any promotional and packaging materials and check that the cooking plates are clean and dust-free. If necessary, wipe them over with a damp cloth. Spread over with an absorbent kitchen towel and wipe off any excess oil.

Note: When your appliance is heated for the first time, it may emit slight smoke or odor, which is normal for many heating appliances, and will not affect the safety of your appliance.

1. Place the machine on a clean, dry, level surface near a plug base outlet.
2. Adjust the temperature knob to the lowest temperature position, check again whether the product and power cord are intact, and connect the plug to the outlet.
3. After plugging in the socket, you need to press the power switch to turn on the power.
4. Select the desired temperature with the control knob. It is recommended to set at 400°F (200°C).
5. Allow the unit to reach desired temperature. The heating indicator light will turn off when the desired temp is reached.
6. The waffle iron grids are non-stick.
7. Add 3/4 to 1 cup of waffle mix to the bottom plate of the waffle maker.

Pour the batter evenly into the center of the grid, and cover the bottom grid with the mix.

1. Set the timer. If at 400°F (200°C), 5 minutes is the suggested time.
2. Turn the waffle maker back over when the timer "dings". Remove the water with a pair of tongs instead of your hands.
3. Repeat the steps above to make multiple waffles.
4. After finished, for safety, please turn the temperature knob counterclockwise the limit position and cut off the power.

Note: It works this way repeatedly to ensure the temperature is specific range. During the machine's operation, the heating indicator cycles on ar off.

TIPS

1. If waffles tend to stick to waffle grids, slightly add more oil or butter to the batter.
2. Belgian waffles taste best when made to order, but baked Belgian waffles may be kept warm in a 200°F (93.3°C) oven. Place them in a baking pan or wrap them in foil while in the oven. Waffles wrapped in foil may lose their crispness.
3. Baked waffles may be frozen. Allow them to cool completely, and then place them in a plastic food storage bag. Use waxed paper to keep waffles separated. Reheat in an oven, toaster, or toaster oven when ready to serve.
4. For first time use, it is recommended to use waffle mix and follow the recipe of the waffle mix.

CLEANING AND MAINTENANCE

1. After use, turn the temperature knob to the lowest temperature, unplug, and wait for the product to cool down.
2. Use a soft brush to clean the residue and oil on the mold surface.
3. For the exterior, wipe with a soft, dry cloth. Never use an abrasive cleanser or harsh pad.
4. Please clean regularly to avoid dirt.

Note: Do not use hard and sharp objects to clean the mold to avoid damaging the non-stick coating.

Notes: Before using it again, reassemble according to the instructions. Warning: Do not use liquid to rinse the product directly to avoid water damage to internal components.

STORAGE

1. Always unplug the machine before storage.
2. Always ensure the machine is cleaned, cooled, and dried before storing.

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr. 69, 60329 Frankfurt am Main

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House

London Road, Staines-upon-Thames, Surrey, TW18 4

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent the savings you might benefit from buying certain tools with us compared to top brands and does not necessarily mean to cover all categories of tools offered. We are kindly reminded to verify carefully when you are placing an order with us actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

MODEL: PC-50

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us: Technical Support and E-Warranty Certificate

www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The application of the product shall be subject to the product you received. Please forgive us and inform you again if there are any technology or software updates on our

SAFETY WARNINGS AND PRECAUTIONS

CLEANING AND MAINTENANCE

C/O YH Consulting Limited Office 147, Centurion H

London Road, Staines-upon-Thames, Surrey, TW18 4

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

COMMERCIAL PANCAKE

MASCHINE

MODEL: PC-25-2 / PC-9 / PC-50

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent of savings you might benefit from buying certain tools with us compared top brands and does not necessarily mean to cover all categories of tools offered are kindly reminded to verify carefully when you are placing an order with us actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to

us: Technical Support and E-Warranty Certificate

www.vevor.com/support

This is the original instruction, please read all manual instructions carefully operating. VEVOR reserves a clear interpretation of our user manual. The app the product shall be subject to the product you received. Please forgive us inform you again if there are any technology or software updates on our

SAFETY WARNINGS AND PRECAUTIONS

CLEANING AND MAINTENANCE

C/O YH Consulting Limited Office 147, Centurion H

London Road, Staines-upon-Thames, Surrey, TW18 4

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

We continue to be committed to provide you with tools at competitive prices. "Save Half", "Half Price" or any other similar expressions used by us only represent the savings you might benefit from buying certain tools with us compared to top brands and does not necessarily mean to cover all categories of tools offered. We kindly remind you to verify carefully when placing an order with us that you are actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

MODEL: PC-50

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us: Technical Support and E-Warranty Certificate

US: Technical Support and E-Warranty Certificate

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The application of the product shall be subject to the product you received. Please forgive us and inform you again if there are any technology or software updates on our

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves the right to interpret our user manual. The product shall be subject to the product you received. Please forgive us if we do not inform you again of any technology or software updates.

CLEANING AND MAINTENANCE

CLEANING AND MAINTENANCE

Imported into AUS: SIHAO PTY LTD, 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

C/O YH Consulting Limited Office 147, Centurion H

London Road, Staines-upon-Thames, Surrey, TW18 4

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent savings you might benefit from buying certain tools with us compared to top brands and does not necessarily mean to cover all categories of tools offered. We kindly remind you to verify carefully when placing an order with us to ensure you are actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

MODEL: PC-50

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us: Technical Support and E-Warranty Certificate

us: Technical Support and E-Warranty Certificate

www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The app and the product shall be subject to the product you received. Please forgive us if we inform you again about any technology or software updates on our

SAFETY WARNINGS AND PRECAUTIONS

CLEANING AND MAINTENANCE

Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd., Suite 250, 9166 Anal Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House

London Road, Staines-upon-Thames, Surrey, TW18 4

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

COMMERCIAL PANCAKE MACHINE

MACHINE

MODEL: PC-25-2 / PC-9 / PC-50

We continue to be committed to providing you tools with competitive prices. "Save Half", "Half Price", or any other similar expressions used by us only represent the savings you might benefit from buying certain tools with us compared to top brands and do not necessarily mean to cover all categories of tools offered. We kindly remind you to verify carefully when placing an order with us that you are actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

MODEL: PC-50

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us: Technical Support and E-Warranty Certificate

www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The application of the product shall be subject to the product you received. Please forgive us and inform you again if there are any technology or software updates on our

SAFETY WARNINGS AND PRECAUTIONS

CLEANING AND MAINTENANCE

Importer for AUS: SIHAO PTY LTD, 1 ROKEVA STREET EASTWOOD N 2122 Australia

Importer for USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim F Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion H

London Road, Staines-upon-Thames, Surrey, TW18 4

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and e-warranty certificate www.vevor.com/support

COMMERCIAL PANCAKE MACHINE

MODELS: PC-25-2 / PC-9 / PC-50

We continue to be committed to providing you with tools at competitive prices. "Save Half", "Half Price", or any other similar expressions used by us only represent savings you might benefit from buying certain tools with us compared to top brands, and do not necessarily mean that all categories of tools offered are covered. We kindly remind you to verify carefully when placing an order with us to ensure that you are actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate

www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The product shall be subject to the product you received. Please forgive us and inform you again if there are any technology or software updates on our products.

SAFETY WARNINGS AND PRECAUTIONS

CLEANING AND MAINTENANCE

Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion H

London Road, Staines-upon-Thames, Surrey, TW18 4

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

COMMERCIAL PANCAKE

MACHINE

MODEL: PC-25-2 / PC-9 / PC-50

We continue to be committed to providing you with tools at competitive prices. "Save Half", "Half Price", or any other similar expressions used by us only represent the savings you might benefit from buying certain tools with us compared to top brands, and does not necessarily mean to cover all categories of tools offered. We kindly remind you to verify carefully when placing an order with us to ensure you are actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to

Technical Support and E-Warranty Certificate

www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The app and the product shall be subject to the product you received. Please forgive us and inform you again if there are any technology or software updates on our

SAFETY WARNINGS AND PRECAUTIONS

CLEANING AND MAINTENANCE

C/O YH Consulting Limited Office 147, Centurion H

London Road, Staines-upon-Thames, Surrey, TW18 4

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support