KLCH-02 - Office Vevor - Free user manual and instructions

USER MANUAL KLCH-02 Vevor

Affordable. Reliable. Home Improvement.

WARNING

Adult assembly

WOODEN KID'S DESK

MODEL:KLCH-02

Technical Support and E-Warranty Certificate

www.vevor.com/support

MODEL:KLCH-02

Line drawing of a simple wooden desk with bookshelves and a cabinet (no text or symbols)

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of o user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you ag there are any technology or software updates on our product.

	Warning-To reduce the risk of injury, user must read instructions manual carefully.Note: Adult assembly required !
CE	Compliance is a CE security certification.
Ages	36 months -18 years

SAFETY INSTRUCTIONS

WARNING:

Read this material before using this product. Failure to do so may result in serious injury.

Assembly precautions

1. Assemble only according to these instructions. Improper assembly may create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Keep the assembly area clean and well-lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble if tired or when under the influence of alcohol, or medication.
6. The product capabilities apply to properly and completely assembled products only.
7. Assemble on a flat, level, hard and smooth surface capable of sa supporting the Wooden Kid's Desk.
8. For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unw and separate all parts in a clean work area.

Use precautions

1. DO NOT SIT OR STAND ON THIS ITEM.

2. This product is not a toy. Do not allow children to play with or item.

3. Do not exceed specified weight capacities.

4. Use only on a flat, level, hard, and smooth surface that can safe support a fully loaded Wooden Kid's Desk.
5. Use as intended only.
6. Inspect before every use; do not use if parts are loose or damage

SAVE THIS MANUAL

PARTS LIST

Technical diagram of a modular furniture or metal frame assembly with numbered components for identification.

PARTS LIST

A	X49+1	B	X49+1	C	X20+1	D	X4
[0XAA]Φ6X32mm		Φ15X9.5mm		Φ8X30mm		25*50mm
E	X15	F	X8	G	X16+1	H	X49
[AGHA]Φ5X40mm		Φ3.5X35mm		Φ3.5X12mm		Φ20
J	X2	K	X2
M4×19		30C CL DL CR DR
	X1

1

A A A A ② ③ A A A A

A X8 φ 6X32mm

2

Technical line drawing of a mechanical assembly with two components, one labeled with number 7 and the other with number 3 (no text or symbols beyond labels)

C	X1	B	X2

1 2 3 4

3

Technical line drawing of three mechanical components with numbered parts (no text or symbols)

B X2 φ 15X9. 5mm

4

1 2 3 4

C ⑦ ③ ② ⑥ B X4

A A ⑦ ③ A A

A X4 φ 6X32mm

6

Technical diagram of a mechanical assembly with labeled components and cross-sectional views

K	X1	G	X2
		3.5 × 12mm

7

A A A A ④ A A ⑤ A A

A	X8

φ 6×32mm

8

Technical line drawing of a mechanical assembly with two components, one showing holes and the other a rod with labeled parts (no text or symbols beyond numbers)

C	X1	B	X2

1 2 3 4

9 B X2 φ 15X9. 5mm 10 B X4 C X1 φ 15X9. 5mm φ 8X30mm 1 2 3 4 C B

11

A A ⑨ ④ A A ⑤ ⑥

A	X4

φ 6×32mm

12

G CR G G ⑨ ④ ⑤ ⑥ G X2

K	X1	G	X2
		3.5 × 12mm

13 C X2 φ 8X30mm 14 E X4 φ 5X40mm

15

G CR G G CL ⑧ G CL G 180°

G	X4	K	X1
Φ3.5X12mm		UL GR

16

Technical diagram of a mechanical assembly with labeled components and numbered parts

C X2 φ 8X30mm

17

⑧ E ⑩ E E ⑪

E X3 φ 5X40mm

18

⑪ ⑧ ⑩ E E

E X2 φ 5X40mm

19

1 2 3 4

Isometric line drawing of a rectangular panel with labeled components (8, 10, 11), no text or symbols present.

C ⑨ C ④ ⑤

B	X2	C	X2
15X9.5mm		8X30mm

Φ 15X9.5mm
φ 8×30mm

20

⑩ ⑨ E E E₀

E	X3
φ5X40mm

Φ 5X40mm

21

Technical diagram of a structural frame assembly with numbered components

B	X2
15X9.5mm

φ 15×9.5mm

22

1 2 3 4

2 1 2 3 4 C C B ⑦ ② ⑩ ① ⑫ C X2 B X Φ8X30mm Φ15

C	X2	B	X4

23

Technical diagram of a structural frame with numbered components and directional arrows indicating material flow or force vectors.

E | X3 φ 5X40mm

24

Technical diagram of a structural frame with labeled components and dimensions

D | X4 25*50mm

25

Isometric view of a rectangular plate with multiple supports and labeled points (A, A', A'', A'', etc.), no text or symbols present.

A	X17

26

Technical diagram of a metal frame structure with labeled components and numbered parts

1 C 2 3 B 4

C	X8	B	X17

27

1 A 2 3 B 4

A A A ⑬ X2

14 13 X2 15

17 15 14 13 X2

F F 16 15 17 14 13 X2

G DR G 17 G DL 16 X2

16 13 J X2

A	X8	B	X8	F	X8	G	X8	J	X2	K	X2

28

Line drawing of a two-level office furniture cabinet with drawers and numbered compartments (no text or symbols)

H	X49

PRODUCT PARAMETER

Model	KLCH-02
Safe Loading Weight	Top: 100 LBSDrawer: 50 LBS
Colour	White
Product Size	1000*480*751 mm

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR

Affordable. Reliable. Home Improvement.

AVERTISSEMENT

Assemblée d'adultes

BUREAU EN BOIS POUR ENFANT

MODÈLE : KLCH-02

Affordable. Reliable. Home Improvement.

ENFANTS EN BOIS

BUREAU

MODÈLE : KLCH-02

Line drawing of a simple wooden desk with bookshelves and a cabinet (no text or symbols)

Technical diagram of a modular furniture or metal frame assembly with numbered components for identification.

LISTE DES PIÈCES

A	X49+1	B	X49+1	C	X20+1	D	X4
[C472]Φ6X32mm		Φ15X9.5mm		Φ8X30mm		25*50mm
E	X15	F	X8	G	X16+1	H	X49
[D884]Φ5X40mm		Φ3.5X35mm		Φ3.5X12mm		Φ20
J	X2	K	X2
M4×19		300 CL DL CR DR
	X1

ÉTAPE D'ASSEMBLAGE

1

A A A A ② ③ A A A A

A X8 φ 6X32mm

2

Technical line drawing of a mechanical assembly with two components, one labeled with number 7 and the other with number 3 (no text or symbols beyond labels)

A A ⑦ ③ A A

A X4 φ 6X32mm

6

G CL ⑦ ② G CL G

K	X1	G	X2
		3.5X12mm

7 A X8 Φ 6X32mm 8 C X1 B X2 Φ 8X30mm Φ 15X9.5mm 1 2 3 4 C C B C

9 B X2 φ 15X9. 5mm 10 B X4 C X1 φ 15X9. 5mm φ 8X30mm 1 2 3 4 C B

G	X4	K	X1
φ3.5X12mm		CL ~CR

B	X2	C	X2
Φ15X9.5mm		Φ8X30mm

E	X3

21

Technical diagram of a structural frame assembly with numbered components for identification

B X2 φ 15X9. 5mm

22

1 2 3 4

2 1 2 3 4 C C B ⑦ ② ⑩ ① ⑫ C X2 B X Φ8X30mm Φ15

C	X2	B	X4

23

Technical diagram of a structural frame with numbered components and dimension lines

E X3 φ 5X40mm

24

Technical diagram of a structural frame with labeled components and dimensions

D X4 25*50mm

C	X8	B	X17

27

1 2 3 4 A B

A A A 13 X2

14 13 15 X2

17 15 14 13 X2

F F 16 15 17 14 13 X2

G DR G 17 G DL 16 X2

16 13 J X2

A	X8	B	X8	F	X8	G	X8	J	X2	K	X2
		Φ6X32mm	Φ15X9.5mm	Φ3.5X35mm		Φ3.5X12mm		M4×19		DL	DR

28

Line drawing of a two-level office furniture cabinet with drawers and numbered compartments (no text or symbols)

H	X49

PARAMÈTRE DU PRODUIT

YH CONSULTING LIMITED. C/O YH Consulting Limited

Bureau 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

REPRÉSENTANT DE LA CE

E-CrossStu GmbH

69, rue Mainzer Landstr.,

Affordable. Reliable. Home Improvement.

WARNUNG

www.vevor.com/support

VEVOR

Affordable. Reliable. Home Improvement.

HOLZ KINDER

SCHREIBTISCH

MODELL:KLCH-02

Line drawing of a simple wooden desk with bookshelves and a cabinet (no text or symbols)

Technical diagram of a modular furniture or metal frame assembly with numbered components for identification.

TEILELISTE

A	X49+1	B	X49+1	C	X20+1	D	X4
[34W5]Φ6X32mm		Φ15X9.5mm		Φ8X30mm		25*50mm
E	X15	F	X8	G	X16+1	H	X49
[WACY]Φ5X40mm		Φ3.5X35mm		Φ3.5X12mm		Φ20
J	X2	K	X2
M4×19		300CL DL CR DR
	X1

MONTAGESTRITT

1

A A A A ② ③ A A A A

A X8 φ 6X32mm

2

Technical line drawing of a mechanical assembly with two components, one labeled with number 7 and the other with number 3 (no text or symbols beyond labels)

Technical diagram of a structural frame assembly with numbered components for identification

B	X2

φ15X9.5mm

22

1 2 3 4

2 1 2 3 4 C C B ⑦ ② ⑩ C C ⑫ ⑫ C X2 B Φ8X30mm Φ15

C	X2	B	X4

23

Technical diagram of a structural frame with numbered components and dimension lines

E X3 φ 5X40mm

24

Technical diagram of a structural frame with labeled components and dimensions

D X4 25*50mm

C	X8	B	X17

27

1 2 3 4 A B

A A A ⑬ X2

14 13 15 X2

17 15 14 13 X2

F F 16 15 17 14 13 X2

G DR G 17 G DL 16 X2

16 13 J X2

A	X8	B	X8	F	X8	G	X8	J	X2	K	X2
		Φ6X32mm	Φ15X9.5mm	Φ3.5X35mm		Φ3.5X12mm		M4×19		DL	DR

28

Line drawing of a two-level office furniture cabinet with drawers and numbered compartments (no text or symbols)

H	X49

PRODUKTPARAMETER

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

www.vevor.com/support

VEVOR

Affordable. Reliable. Home Improvement.

AVVERTIMENTO

elettronica www.vevor.com/support

VEVOR

Affordable. Reliable. Home Improvement.

BAMBINI IN LEGNO

SCRIVANIA

MODELLO:KLCH-02

Line drawing of a simple wooden desk with bookshelves and a cabinet (no text or symbols)

Technical diagram of a modular furniture or metal frame assembly with numbered components for identification.

ELENCO DELLE PARTI

A	X49+1	B	X49+1	C	X20+1	D	X4
(2027)Φ6X32mm		Φ15X9.5mm		Φ8X30mm		25*50mm
E	X15	F	X8	G	X16+1	H	X49
t###dΦ5X40mm		Φ3.5X35mm		Φ3.5X12mm		Φ20
J	X2	K	X2
M4×19		300
		CL	DL	~CR	~DR
	X1
DTM+0

FASE DI MONTAGGIO

1

A A A A ② ③ A A A A

A X8 φ 6X32mm

2

Technical line drawing of a mechanical assembly with two components, one labeled with number 7 and the other with number 3 (no text or symbols beyond labels)

Technical diagram of a structural frame assembly with numbered components

B X2 φ 15X9. 5mm

22

1 2 3 4

2 1 2 3 4 C C B ⑦ ② ⑩ ① ⑫ C X2 B Φ8X30mm Φ15

C	X2	B	X4

23

Technical diagram of a structural frame with numbered components and dimension lines

E X3 φ 5X40mm

24

Technical diagram of a structural frame with labeled components and dimensions

D X4 25*50mm

C	X8	B	X17

27

1 2 3 4 A B

A A A ⑬ X2

14 13 15 X2

17 15 14 13 X2

F F 16 15 17 14 13 X2

G DR G 17 G DL 16 X2

16 13 J X2

A	X8	B	X8	F	X8	G	X8	J	X2	K	X2
		Φ6X32mm	Φ15X9.5mm	Φ3.5X35mm		Φ3.5X12mm		M4×19		DL	DR

PARAMETRO PRODOTTO

Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Importato negli USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

RAPPRESENTANZA DEL REGNO UNITO

YH CONSULTING LIMITED. C/O YH Consulting

Limited Ufficio 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

Affordable. Reliable. Home Improvement.

ADVERTENCIA

Asamblea de adultos

ESCRITORIO INFANTIL DE MADERA

MODELO:KLCH-02

Affordable. Reliable. Home Improvement.

NIÑOS DE MADERA

ESCRITORIO

MODELO:KLCH-02

Line drawing of a simple wooden desk with bookshelves and a cabinet (no text or symbols)

Technical diagram of a modular furniture or metal frame assembly with numbered components for identification.

LISTA DE PIEZAS

A	X49+1	B	X49+1	C	X20+1	D	X4
[730X]Φ6X32mm		Φ15X9.5mm		Φ8X30mm		25*50mm
E	X15	F	X8	G	X16+1	H	X49
Φ5X40mm		Φ3.5X35mm		Φ3.5X12mm		Φ20
J	X2	K	X2
M4×19		300CL DL CR DR
	X1
[OKTO]

PASO DE MONTAJE

1

A A A A ② ③ A A A A

A X8 φ 6X32mm

2

Technical line drawing of a mechanical assembly with two components: a flat plate and a long rod, labeled with numbers ⑦ and ③ (no text or symbols beyond labels)

Technical diagram of a structural frame assembly with numbered components for identification

B X2 φ 15X9. 5mm

22

1 2 3 4

2 1 2 3 4 C C B ⑦ ② ⑩ ① ⑫ C X2 B X Φ8X30mm Φ15

C	X2	B	X4

23

Technical diagram of a structural frame with numbered components and dimension lines

E X3 φ 5X40mm

24

Technical diagram of a structural frame with labeled components and dimensions

D X4 25*50mm

C	X8	B	X17

27

1 2 3 4 A B

A A A 13 X2

14 13 15 X2

17 15 14 13 X2

F F 16 15 17 14 13 X2

G DR G 17 G DL 16 X2

16 13 J X2

A	X8	B	X8	F	X8	G	X8	J	X2	K	X2
		[60x7]Φ 6X32mm	Φ 15X9.5mm		Φ 3.5X35mm		Φ 3.5X12mm		M4×19		[STAAM]DLDR

28

Line drawing of a two-level office furniture cabinet with drawers and numbered compartments (no text or symbols)

H	X49

PARÁMETRO DEL PRODUCTO

Road, Staines-upon-Thames, Surrey, TW18 4AX

REPRESENTANTE CE

E-CrossStu GmbH

Calle Mainz Landstr.69,

Affordable. Reliable. Home Improvement.

OSTRZEŻENIE

Affordable. Reliable. Home Improvement.

DREWNIANE DLA DZIECI

BIURKO

MODEL:KLCH-02

Line drawing of a simple wooden desk with bookshelves and a cabinet (no text or symbols)

Technical diagram of a modular furniture or metal frame assembly with numbered components for identification.

LISTA CZĘŚCI

A	X49+1	B	X49+1	C	X20+1	D	X4
[1W24]Φ6X32mm		Φ15X9.5mm		Φ8X30mm		25*50mm
E	X15	F	X8	G	X16+1	H	X49
[20XX]Φ5X40mm		Φ3.5X35mm		Φ3.5X12mm		Φ20
J	X2	K	X2
M4×19		300 CL DL CR DR
	X1

KROK MONTAŻU

1

A A A A ② ③ A A A A

A X8 φ 6X32mm

2

Technical line drawing of a mechanical assembly with two components: a rectangular plate and a long rod, labeled with numbers ⑦ and ③ (no text or symbols beyond labels)

Technical diagram of a structural frame assembly with numbered components

B	X2

φ15×9.5mm

22

1 2 3 4

2 1 2 3 4 C C B ⑦ ② ⑩ C C ⑫ ⑫ C X2 B Φ8X30mm Φ15

C	X2	B	X4

23

Technical diagram of a structural frame with numbered components and dimension lines

E X3 φ 5X40mm

24

Technical diagram of a structural frame with labeled components and dimensions

D X4 25*50mm

C	X8	B	X17

27

1 2 3 4 A B

A A A ⑬ X2

14 13 15 X2

17 15 14 13 X2

F F 16 15 17 14 13 X2

G DR G 17 G DL 16 X2

16 13 J X2

A	X8	B	X8	F	X8	G	X8	J	X2	K	X2
	[16666]Φ 6X32mm	Φ 15X9.5mm		Φ 3.5X35mm		Φ 3.5X12mm		M4×19	[CT04]	DL	[XTRA]DR

28

Isometric line drawing of a two-level office or storage unit with labeled compartments and directional arrows indicating movement (no text or symbols present)

H	X49

PARAMETR PRODUKTU

YH CONSULTING LIMITED. C/O YH Consulting Limited

Biuro 147, Centurion House, London Road, Staines-

upon-Thames, Surrey, TW18 4AX

Przedstaw ciel UE

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt nad Menem.

Affordable. Reliable. Home Improvement.

WAARSCHUWING

Volwassen vergadering

HOUTEN KINDERBUREAU

MODEL: KLCH-02

www.vevor.com/support

VEVOR

Affordable. Reliable. Home Improvement.

HOUTEN KINDERKAST

BUREAU

MODEL: KLCH-02

Line drawing of a simple wooden desk with bookshelves and a cabinet (no text or symbols)

Technical diagram of a modular furniture or metal frame assembly with numbered components for identification.

ONDERDELENLIJST

A	X49+1	B	X49+1	C	X20+1	D	X4
[mm]Φ6X32mm		Φ15X9.5mm		Φ8X30mm		25*50mm
E	X15	F	X8	G	X16+1	H	X49
[mm]Φ5X40mm		Φ3.5X35mm		Φ3.5X12mm		Φ20
J	X2	K	X2
M4×19		300CL DL CR DR
	X1

MONTAGESTAP

1

A A A A ② ③ A A A A

A X8 φ 6X32mm

2

Technical line drawing of a mechanical assembly with two components, one labeled with number 7 and the other with number 3 (no text or symbols beyond labels)

Technical diagram of a structural frame assembly with numbered components for identification

B X2 φ 15X9. 5mm

22

1 2 3 4

2 1 2 3 4 C C B ⑦ ② ⑩ C ⑫ ⑫ C X2 B X Φ8X30mm Φ15

C	X2	B	X4

23

Technical diagram of a structural frame with numbered components and dimension lines

E X3 φ 5X40mm

24

Technical diagram of a structural frame with labeled components and dimensions

D X4 25*50mm

C	X8	B	X17

27

1 2 3 4 A B

A A A ⑬ X2

14 13 15 X2

17 15 14 13 X2

F F 16 15 17 14 13 X2

G DR G 17 G DL 16 X2

16 13 J X2

A	X8	B	X8	F	X8	G	X8	J	X2	K	X2
		Φ6X32mm	Φ15X9.5mm		Φ3.5X35mm		Φ3.5X12mm		[###]M4×19		###DLDR

28

Line drawing of a two-level office furniture cabinet with drawers and numbered compartments (no text or symbols)

H	X49

PRODUCTPARAMETER

Model	KLCH-02
Veilig laadgewicht	Boven: 100 LBSLade: 50 LBS
Kleur	Wit
Productgrootte	1000*480*751mm

Fabrikant: Shanghaimuxinmuyeyouxiangongsi Adres:

Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

YH CONSULTING LIMITED. C/O YH Consulting

Limited Kantoor 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC-REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

Technische ondersteuning en e-garantiecertificaat www.vevor.com/support

VEVOR

Affordable. Reliable. Home Improvement.

WARNING

Vuxensamling

BARNSKRIVBORD i TRÄ

MODELL:KLCH-02

www.vevor.com/support

VEVOR

Affordable. Reliable. Home Improvement.

TRÄ BARN

SKRIVBORD

MODELL:KLCH-02

Line drawing of a simple wooden desk with bookshelves and a cabinet (no text or symbols)

Technical diagram of a modular furniture or metal frame assembly with numbered components for identification.

DELLISTA

A	X49+1	B	X49+1	C	X20+1	D	X4
DCZ5Φ6X32mm		Φ15X9.5mm		Φ8X30mm		25*50mm
E	X15	F	X8	G	X16+1	H	X49
C886Φ5X40mm		Φ3.5X35mm		Φ3.5X12mm		Φ20
J	X2	K	X2
M4×19		300 CL DL CR DR
	X1

MONTERINGSTEG

1

A A A A ② ③ A A A A

A X8 φ 6X32mm

2

Technical line drawing of a mechanical assembly with two components, one labeled with number 7 and the other with number 3 (no text or symbols beyond labels)

Technical diagram of a structural frame assembly with numbered components for identification

B	X2

φ15×9.5mm

22

1 2 3 4

2 1 2 3 4 C C B ⑦ ② ⑩ ① ⑫ C X2 B Φ8X30mm Φ15

C	X2	B	X4

23

Technical diagram of a structural frame with numbered components and dimension lines

E X3 φ 5X40mm

24

Technical diagram of a structural frame with labeled components and dimensions

D X4 25*50mm

C	X8	B	X17

27

1 2 3 4 A B

A A A ⑬ X2

14 13 15 X2

17 15 14 13 X2

F F 16 15 17 14 13 X2

G DR G 17 G DL 16 X2

16 13 J X2

A	X8	B	X8	F	X8	G	X8	J	X2	K	X2
		[wGCC]						M4×19	(###)	DL	DR
		φ6X32mm	φ15X9.5mm	φ3.5X35mm		φ3.5X12mm

28

Line drawing of a two-level office furniture cabinet with drawers and numbered compartments (no text or symbols)

H	X49

PRODUKTPARAMETER

	KLCH-02Modell
Säker lastvikt	Topp: 100 LBSLåda: 50 LBS
Färg	Vit
Produktstorlek	1000*480*751 mm

Tillverkare: Shanghaimuxinmuyeyouxiangongsi Adress:

Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Importerad till AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australien

Importerad till USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

www.vevor.com/support