LT80300GA - Power tool accessory Vevor - Free user manual and instructions

Product Type	Custom Exhaust Pipe Kit
Brand	Vevor
Model	LT80300GA
Material	Low Carbon Steel
Diameter	3 inches (76.2 mm)
Number of Pieces	8 pieces
Intended Use	Automotive Exhaust System Modification
Key Features	High strength, corrosion resistance, customizable
Assembly Method	Welding
Usage Precautions	Wear protective goggles and gloves when welding
Post-Installation Check	Start the vehicle and check for exhaust leaks
Regulatory Compliance	Must comply with local emissions and noise laws
Warranty	Electronic warranty certificate available at www.vevor.com/support
Technical Support	Technical support via www.vevor.com/support
Manufacturer	Shanghaimuxinmuyeyouxiangongsi, Shanghai, China
Importer (Australia)	SIHAO PTY LTD, NSW
Importer (United States)	Sanven, Frankfurt am Main
Maintenance	Periodically check for leaks and corrosion
Repairability	Requires professional welding skills
Spare Parts	Not specified; contact manufacturer if necessary

Frequently Asked Questions - LT80300GA Vevor

Is the LT80300GA kit compatible with all vehicles?

No, the kit is designed for custom modification. You need to cut and weld the tubes according to the vehicle's layout. Check the available space and diameters before purchase.

What type of welding is recommended?

Arc welding or TIG welding is recommended for low carbon steel. Ensure the welds are airtight to prevent leaks.

Can I install this kit without welding experience?

It is strongly recommended to use a professional. Welding requires specific skills and protective equipment.

Is the kit legal on the road?

Legality depends on local emissions and noise laws. Check with local authorities before modification.

How to avoid leaks after installation?

After welding, start the engine and listen for hissing sounds. Use a leak detector spray if necessary. Seal any leak with additional welding.

What additional tools are needed?

You will need a welding machine, an angle grinder to cut tubes, protective gloves and goggles, and possibly a tube bender.

Is the material corrosion resistant?

Low carbon steel offers good resistance, but it can rust if not protected. High-temperature paint is recommended.

What is the length of the tubes provided?

Exact dimensions are not specified. The kit contains 8 pieces of 3-inch diameter. Individual lengths are to be adjusted during installation.

Does the kit affect engine performance?

An exhaust modification can alter back pressure and sound. Effects on performance vary by vehicle and setup.

How to get a spare part if a tube is damaged?

Contact Vevor customer service at www.vevor.com/support. Individual parts are not listed separately, but assistance may be provided.

USER MANUAL LT80300GA Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

CUSTOM EXHAUST PIPE KIT

MODEL:

LT80250SS/LT80250GA/LT80300GA/LT160200GA/LT160225GA /LT160250SS/LT160250GA/LT160300GA

We continue to be committed to provide you tools with competitive price. "Save Half Price" or any other similar expressions used by us only represents an estimate of s you might benefit from buying certain tools with us compared to the major top brand does not necessarily mean to cover all categories of tools offered by us. You are reminded to verify carefully when you are placing an order with us if you are actual half in comparison with the top major brands.

VEVOR®

CUSTOM

EXHAUST

PIPE KIT

Model: LT80250SS/ LT80250GA/ LT80300GA/ LT160200GAL/ T160225GA/ LT160250SS/ LT160250GA/ LT160300GA

Collection of metallic U-shaped pipe fittings arranged in a grid pattern (no text or symbols)

Metal pipe fittings arranged in a symmetrical U-shaped pattern (no text or symbols visible)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions care before operating. VEVOR reserves a clear interpretation of our user m appearance of the product shall be subject to the product you receive forgive us that we won't inform you again if there are any technology updates on our product.

Stainless Steel Tube for Automobile Exhaust Pipe Modification Instruction Manual

Product Overview

This stainless steel tube is specially designed for the modification of automobile exhaust pipes. It is characterized by high strength and corrosion resistance, which can meet your individualized needs for the vehicle's exhaust system.

Assembly Method

1. Before assembling, please ensure that you have the corresponding welding tools and skills, or seek the help of professionals.
2. According to the desired shape of the automobile exhaust pipe, cut bend the stainless steel tube to fit the installation position of the v
3. Use the welding method to connect the stainless steel tubes together. Pay attention to make the welding points firm and sealed to prevent exhaust leakage.

Precautions

1. Modifying the vehicle's exhaust pipe may affect the vehicle's exhaust emissions and noise level. Please ensure that your modification complies with local laws and regulations.
2. During the welding process, be sure to take appropriate protective measures, such as wearing goggles and gloves, to protect your safe
3. After the installation is completed, start the vehicle and check whether here is any leakage in the exhaust system. If there is any abnormal should be repaired in time.
   Please note that the above manual is only an example and you can and improve it according to the actual situation.

PARAMETER LIST

Model	amount	Size/material	picture
LT80250SS	8pcs	2.5inch/stainless steel
LT80250GA	8pcs	2.5inch/low carbon stee
LT80300GA	8pcs	3inch/low carbon steel
LT160200GA	16pcs	2inch/low carbon steel
LT160225GA	16pcs	2.25inch/low carbon stee
LT160250SS	16pcs	2.5inch/stainless steel
LT160250GA	16pcs	2.5inch/low carbon stee
LT160300GA	16pcs	3inch/low carbon steel

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Collection of metallic U-shaped pipe fittings arranged in a grid pattern (no text or symbols)

Metal pipe fittings arranged in a V-grip pattern (no text or symbols visible)

BESOIN D'AIDE ? CONTACTEZ-NOUS!

Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

YH CONSULTING LIMITÉE. C/O YH Consulting Limited

Bureau 147, Centurion House, London Road, Stainesupon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

Collection of metallic U-shaped pipe fittings arranged in a grid pattern (no text or symbols)

Metal pipe fittings arranged in a V-grip pattern (no text or symbols visible)

YH CONSULTING LIMITED. C/O YH Consulting Limited

Office 147, Centurion House, London Road, Staines-

upon-Thames, Surrey, TW18 4AX

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Collection of metallic U-shaped pipe fittings arranged in a grid pattern (no text or symbols)

Metal pipe fittings arranged in a V-grip pattern (no text or symbols visible)

Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Importato negli

Stati Uniti: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

REP. DEL

REGNO UNITO

YH CONSULENZA LIMITATA. C/O YH Consulting

Limited Office 147, Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

REP.CE

E-CrossStu GmbH

Mainzer Landstr.69,

elettronica www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Collection of metallic U-shaped pipe fittings arranged in a grid pattern (no text or symbols)

Metal pipe fittings arranged in a V-grip pattern (no text or symbols visible)

YH CONSULTING LIMITADO. C/O YH Consulting

Limited Oficina 147, Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

Collection of metallic U-shaped pipe fittings arranged in a grid pattern (no text or symbols)

Metal pipe fittings arranged in a V-grip pattern (no text or symbols visible)

POTRZEBUJESZ POMOCY? SKONTAKTUJ SIĘ Z NAMI!

Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

ODPOWIEDZIALNOŚCIĄ. C/O YH Consulting Limited Office

147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt nad Menem.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technische ondersteuning en e-garantiecertificaat www.vevor.com/support

AANGEPASTE UITLAATPIJPKIT

MODEL:

LT80250SS/LT80250GA/LT80300GA/LT160200GA/LT160225GA /LT160250SS/LT160250GA/LT160300GA

Collection of metallic U-shaped pipe fittings arranged in a grid pattern (no text or symbols)

Metal pipe fittings arranged in a V-grip pattern (no text or symbols visible)

HULP NODIG? NEEM CONTACT MET ONS OP!

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

EG REP

garantiecertificaat www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Collection of metallic U-shaped pipe fittings arranged in a grid pattern (no text or symbols)

Metal pipe fittings arranged in a V-grip pattern (no text or symbols visible)

BEHÖVER HJÄLP? KONTAKTA OSS!

YH CONSULTING LIMITED. C/O YH Consulting Limited

Office 147, Centurion House, London Road, Staines-

upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support