KLCB-01 - Pets Vevor - Free user manual and instructions

Product Type	Slatwall Panels
Brand	Vevor
Model	KLCB-01
Quantity	2 panels
Material	MDF (Medium Density Fiberboard)
Available Colors	Black, White, Beige (Burlywood)
Dimensions of Each Panel	4 x 2 feet (approx. 122 x 61 cm)
Total Area	16 square feet (approx. 1.49 m²)
Approximate Weight per Panel	Approximately 8-10 kg
Usage	Storage and display for pets
Assembly	Wall mounting with screws (6 screws recommended)
Load Capacity	Do not overload; maximum load not specified
Required Tools	Electric saw for possible cutting, drill
Maintenance	Avoid prolonged exposure to sunlight
Safety	Wear work gloves, keep workspace clean
Warranty	Electronic warranty certificate available
Technical Support	www.vevor.com/support

Frequently Asked Questions - KLCB-01 Vevor

How to install KLCB-01 Slatwall panels?

It is recommended to use six mounting screws evenly spaced. Attach the panels to the wall following the pre-drilled holes (not provided). Wear work gloves and work in a clean, well-lit area.

What tools are needed for cutting the panels?

Use an electric saw with a fine, sharp blade to cut the panels horizontally or vertically as needed.

What is the maximum load capacity?

The manual indicates that overloading is strictly prohibited, but no specific load capacity is given. For safety, do not load the panels beyond reasonable use.

Are the panels moisture resistant?

The material is MDF, which can be sensitive to moisture. It is advised to avoid prolonged exposure to moisture or sunlight to prevent aging.

Can I paint the panels?

Yes, you can paint the MDF panels with suitable paint. Make sure to prepare them properly (light sanding) and use a primer.

Are the panels delivered with mounting accessories?

The manual does not mention included mounting accessories. You will likely need to purchase screws and wall plugs suitable for your wall separately.

How to clean the Slatwall panels?

Use a soft, dry cloth to dust. Avoid harsh chemicals that could damage the MDF surface.

Can the panels be used for pets other than dogs and cats?

Yes, these panels are suitable for storing or displaying accessories for various pets, as long as the total weight does not exceed the recommended capacity.

What is the lifespan of the panels?

With proper maintenance (avoid moisture and direct sunlight), MDF panels can last several years. Their durability depends on usage.

Where to find spare parts?

For spare parts, contact Vevor after-sales service via www.vevor.com/support. No specific spare parts are listed in the manual.

USER MANUAL KLCB-01 Vevor

Technical Support and E-Warranty Certificate

www.vevor.com/support

Slatwall Panels

MODEL: KLCB-01

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to co all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually Saving Half in comparison with the top major brands.

Model: KLCB-01

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel fr contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instruction carefully before operating. VEVOR reserves a clear interpretation user manual. The appearance of the product shall be subject to product you received. Please forgive us that we won't inform you there are any technology or software updates on our product.

INSTRUCTIONS

Thank you very much for choosing this Slatwall Panels

• Please read all of the instructions before using it. The information will help you achieve the best possible results.

WARNING:

1. Operate in a safe work environment. Keep your work area clean, and free of distractions.
2. Wear heavy-duty work gloves during assembly.
3. Over-loading is strictly forbidden.
4. Slatwall can be cut horizontally or vertically to accommodate room dimensions.
5. Preferably use an electric saw with a thin, sharp blade for slatwall cutting.

SAVE THESE INSTRUCTIONS

MODEL AND PARAMETERS

Model	KLCB-01
Quantity	2 pieces
Material	MDF
Color	Black /White /Burlywood
Size of each piece	4 * 2 ft
Total area	16 sq.ft

ASSEMBLY AND USE

It is recommended to install six mounting screw holes, as shown figu

MAINTENANCE

1. Avoid prolonged exposure to the sun to avoid aging.

Manufacturer: Shanghaiuxinmuyeyouxianggsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NS 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Plac Rancho Cucamonga, CA 91730

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Ma

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion H, London Road, Staines-upon-Thames, Surrey, TW18 4

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Assistance technique et certificate de garantie

C/O YH Consulting Limited Bureau 147, Centurion House,

Route de Londres, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR

TOUGH TOOLS, HALF PRICE

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR

TOUGH TOOLS, HALF PRICE

Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW

2122 Australia

Importato negli USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place,

Rancho Cucamonga, CA 91730

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Francoforte sul Meno.

CONSULENZA YH LIMITATA.

C/O YH Consulting Limited Ufficio 147, Centurion House,

Via Roma, 101, 00186 Roma, Italia

VEVOR

TOUGH TOOLS, HALF PRICE

C/O YH Consulting Limited Biuro 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR

TOUGH TOOLS, HALF PRICE

HULP NODIG? NEEM CONTACT MET ONS OP!

C/O YH Consulting Limited Kantoor 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR

TOUGH TOOLS, HALF PRICE

Technische ondersteuning en e-garantiecertificaat www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR

TOUGH TOOLS, HALF PRICE