KLCH-03 - Office Vevor - Free user manual and instructions

USER MANUAL KLCH-03 Vevor

Affordable. Reliable. Home Improvement.

WARNING

Adult assembly

WOODEN KID'S DESK

MODEL:KLCH-03

Technical Support and E-Warranty Certificate

www.vevor.com/support

MODEL:KLCH-03

Line drawing of a simple wooden desk with four legs and one drawer (no text or symbols)

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of o user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you ag there are any technology or software updates on our product.

	Warning-To reduce the risk of injury, user must read instructions manual carefully.Note: Adult assembly required !
CE	Compliance is a CE security certification.
Ages	36 months -18 years

SAFETY INSTRUCTIONS

WARNING:

Read this material before using this product. Failure to do so may result in serious injury.

Assembly precautions

1. Assemble only according to these instructions. Improper assembly may create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Keep the assembly area clean and well-lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble if tired or when under the influence of alcohol, or medication.
6. The product capabilities apply to properly and completely assembled products only.
7. Assemble on a flat, level, hard and smooth surface capable of sa supporting the Wooden Kid's Desk.
8. For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unw and separate all parts in a clean work area.

Use precautions

1. DO NOT SIT OR STAND ON THIS ITEM.

2. This product is not a toy. Do not allow children to play with or item.

3. Do not exceed specified weight capacities.

4. Use only on a flat, level, hard, and smooth surface that can safe support a fully loaded Wooden Kid's Desk.
5. Use as intended only.
6. Inspect before every use; do not use if parts are loose or damage

SAVE THIS MANUAL

PARTS LIST

Exploded view diagram of a modular device with numbered components for assembly or maintenance reference.

PARTS LIST

A	X21+1	B	X21+1	C	X16+1	D	X4
[YY7]Φ 6X32mm		Φ 15X9.5mm		Φ 8X30mm		25*30mm
E	X19	F	X8	G	X16+1	H	X12
[026Y]Φ 5X40mm		Φ 3.5X35mm		Φ 3.5X12mm		M8
J	X12	K	X2			L	X21
Φ 8X60mm						Φ 20
	X1		X1
(ATZX)14mm 5mm		(4CS7)

1 A X13 φ 6X32mm 2 K X1 CL CR G X4 φ 3.5X12mm

3

G G CR G 4 G CL G 180° K CL G

K	X1
G	X4
3.5X12mm

4

1 2 3 4 C B C ① ② ③ B X6 C

B	X6	C	X4

B	X3	C	X2
15X9.5mm		8X30mm

15X9.5mm
φ 8X30mm

B	X4	C	X2
	15X9.5mm		8X30mm

7

E E E E E E ② ③ ④ ⑤ E E

E	X6

φ 5X40mm

8

Technical diagram of a mechanical assembly with numbered components and labeled parts (C)

C	X8

9

E E E E E E E E ⑥ ⑤ ②

E	X13
φ 5X40mm

φ 5X40mm

10

J J J C C C J J C J J C ⑥

J	X12
[TCOY]Φ8X60mm

φ 8X60mm

11

Technical line drawing of a structural support frame with four vertical supports and mounting holes, labeled D and numbered 6 (no text or symbols on the diagram itself)

D	X4
25*30mm

25*30mm

12

① H to H to H H to H to H ⑥ H to H to H H to H to H H J

H	X12

13

1 2 3 4

A A A 7 X2

X2

⑪ ⑨ ⑧ ⑦ X2

F F 10 11 7 X2

G DR G 11 DL G 10 X2

Isometric line drawing of a rectangular electronic device with a labeled mounting point (X2), no text or symbols present.

A	X8	B	X8	F	X8	G	X8	K	X2
	[HHZ]
	6X32mm		15X9.5mm		3.5X35mm		3.5X12mm		nm

14

Technical diagram of a wooden table with labeled components and directional arrows indicating movement or flow.

15

Line drawing of a simple wooden desk with four legs and one drawer (no text or symbols)

L	X21

PRODUCT PARAMETER

Model	KLCH-03
Safe Loading Weight	Top: 100 LBSDrawer: 50 LBS
Colour	Light Wood + White
Product Size	990*510*765mm

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

Technical Support and E-Warranty Certificate www.vevor.com/support

VEVOR

Affordable. Reliable. Home Improvement.

AVERTISSEMENT

Assemblée d'adultes

BUREAU EN BOIS POUR ENFANT

MODÈLE : KLCH-03

Affordable. Reliable. Home Improvement.

ENFANTS EN BOIS

BUREAU

MODÈLE : KLCH-03

Line drawing of a simple wooden desk with four legs and one drawer (no text or symbols)

Exploded view diagram of a mechanical assembly with numbered components for identification

LISTE DES PIÈCES

A	X21+1	B	X21+1	C	X16+1	D	X4
[442K]Φ 6X32mm		Φ 15X9.5mm		Φ 8X30mm		25*30mm
E	X19	F	X8	G	X16+1	H	X12
Φ 5X40mm		Φ 3.5X35mm		Φ 3.5X12mm		M8
J	X12	K	X2			L	X21
[6X2W]Φ 8X60mm		OL DL OK				Φ 20
	X1		X1
[X822]14mm 5mm		[303T]

ÉTAPE D'ASSEMBLAGE

1 A X13 φ 6X32mm 2 K X1 CL CR G X4 φ 3.5X12mm

3 G G CR G G 180° 4 CL G G K X1 CL CR G X4 φ 3.5X12mm

4 1 2 3 4 C C ① ② C C B X6 C X4 Φ 15X9.5mm Φ 8X30mm

B	X3	C	X2
15X9.5mm		8X30mm

φ 15X9.5mm
φ 8X30mm

B	X4	C	X2
15X9.5mm		8X30mm

Φ 15X9.5mm
φ 8X30mm

7

Technical diagram of a multi-panel electronic device with labeled components and E indicators

E	X6
Φ5X40mm

φ 5×40mm

8

Technical diagram of a multi-level electronic device with labeled components and mounting points

C	X8

φ 8×30mm

9

E E E E E E E E E ② ⑥ ⑤

E	X13

φ 5×40mm

10

Technical line drawing of a mechanical assembly with three vertical supports and labeled joints (no text or symbols present)

J	X12

φ 8X60mm

11

Technical line drawing of a structural support frame with four vertical supports and mounting holes, labeled D, showing no text or symbols.

D	X4

25*30mm

12

① H H H H H H ⑥ H H H H H H H H H H J

H	X12

13

1 2 3 4

A A 7 A A X2

X2

⑪ ⑨ ⑧ ⑦ X2

F F 10 11 7 X2

G DR G G DL 11 G 10 X2

Line drawing of a rectangular drawer with a handle and labeled part (X2), no text or symbols present.

A	X8	B	X8	F	X8	G	X8	K	X2
	[52×2]Φ6×32mm		Φ15×9.5mm		Φ3.5×35mm		Φ3.5×12mm

14

Technical diagram of a wooden table with labeled components and directional arrows indicating movement or flow.

15

Line drawing of a simple wooden table with four legs and one drawer (no text or symbols)

L B

L	X21

PARAMÈTRE DU PRODUIT

YH CONSULTING LIMITED. C/O YH Consulting Limited

Bureau 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

REPRÉSENTANT DE LA CE

E-CrossStu GmbH

69, rue Mainzer Landstr.,

Affordable. Reliable. Home Improvement.

WARNUNG

www.vevor.com/support

VEVOR

Affordable. Reliable. Home Improvement.

HOLZ KINDER

SCHREIBTISCH

MODELL:KLCH-03

Line drawing of a simple wooden desk with four legs and one drawer (no text or symbols)

Exploded view diagram of a mechanical assembly with numbered components for identification

TEILELISTE

A	X21+1	B	X21+1	C	X16+1	D	X4
Φ 6X32mm		Φ 15X9.5mm		Φ 8X30mm		25*30mm
E	X19	F	X8	G	X16+1	H	X12
[HTZC]Φ 5X40mm		Φ 3.5X35mm		Φ 3.5X12mm		M8
J	X12	K	X2			L	X21
[84D0]Φ 8X60mm		CL DL CR DR				Φ 20
	X1		X1
[A6V0]14mm 5mm

MONTAGESTRITT

1 A X13 φ 6X32mm 2 K X1 CL CR G X4 φ 3.5X12mm

3 G G CR G G 180° 4 CL G G K X1 CL CR G X4 φ 3.5X12mm

4 1 2 3 4 C C ① ② C C B X6 C X4 Φ 15X9.5mm Φ 8X30mm

B	X3	C	X2
15 × 9.5mm		8 × 30mm

φ 15X9.5mm
φ 8X30mm

B	X4	C	X2
15X9.5mm		8X30mm

15X9.5mm
φ 8X30mm

7

Technical diagram of a multi-panel electronic device with labeled components and E indicators

E	X6

φ 5×40mm

8

Technical diagram of a multi-level electronic device with labeled components and mounting points

C	X8

φ 8×30mm

9

E E E E E E E E E ② ⑥ ⑤

E	X13

5X40mm

10

Technical line drawing of a mechanical assembly with three vertical supports and labeled joints (no text or symbols present)

J	X12

φ 8X60mm

11

Technical line drawing of a structural support frame with four vertical supports and mounting holes, labeled D, showing no text or symbols.

D	X4

25*30mm

12

① H H H H H H ⑥ H H H H H H H H H H J

H	X12

13

1 2 3 4

A A 7 A A X2

X2

⑪ ⑨ ⑧ ⑦ X2

F F 10 11 7 X2

G DR G G DL 11 G 10 X2

Line drawing of a rectangular drawer with a handle and labeled part (X2), no text or symbols present.

A	X8	B	X8	F	X8	G	X8	K	X2
6 × 32 mm
		15 × 9.5 mm		3.5 × 35 mm		3.5 × 12 mm

14

Technical diagram of a wooden table with labeled components and directional arrows indicating movement or flow.

15

Line drawing of a simple wooden table with four legs and one drawer (no text or symbols)

L

B

L	X21

PRODUKTPARAMETER

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

Affordable. Reliable. Home Improvement.

AVVERTIMENTO

elettronica www.vevor.com/support

VEVOR

Affordable. Reliable. Home Improvement.

BAMBINI IN LEGNO

SCRIVANIA

MODELLO:KLCH-03

Line drawing of a simple wooden desk with four legs and one drawer (no text or symbols)

Exploded view diagram of a mechanical assembly with numbered components for identification

ELENCO DELLE PARTI

A	X21+1	B	X21+1	C	X16+1	D	X4
Φ 6X32mm		Φ 15X9.5mm		Φ 8X30mm		25*30mm
E	X19	F	X8	G	X16+1	H	X12
Φ 5X40mm		Φ 3.5X35mm		Φ 3.5X12mm		M8
J	X12	K	X2			L	X21
[242C]Φ 8X60mm		[7XKKX]				Φ 20
	X1		X1
[WTG3]14mm 5mm		[0YWO]

FASE DI MONTAGGIO

1 A X13 φ 6X32mm 2 K X1 CL CR G X4 φ 3.5X12mm

3 G G CR G G 180° 4 CL G G K X1 CL CR G X4 φ 3.5X12mm

4 1 2 3 4 C C ① ② C C B X6 C X4 Φ 15X9.5mm Φ 8X30mm

B	X3	C	X2
15X9.5mm		8X30mm

φ 15X9.5mm
φ 8X30mm

B	X4	C	X2
15X9.5mm		8X30mm

Φ 15X9.5mm
φ 8X30mm

7

Technical diagram of a multi-panel electronic device with labeled components and E indicators

E	X6

φ 5×40mm

8

Technical diagram of a multi-level electronic device with labeled components and mounting points

C	X8
φ 8X30mm

φ 8×30mm

9

E E E E E E E E E ② ⑥ ⑤

E	X13
[XYA8]φ 5X40mm

5X40mm

10

Technical line drawing of a mechanical assembly with three vertical supports and labeled joints (no text or symbols present)

J	X12

φ 8X60mm

11

Technical line drawing of a structural support frame with four vertical supports and mounting holes, labeled D, showing no text or symbols.

D	X4

25*30mm

12

① H H H H H H ⑥ H H H H H H H J

H	X12

13

1 2 3 4

A A 7 A A X2

X2

⑪ ⑨ ⑧ ⑦ X2

F F 10 11 7 X2

G DR G G DL 11 G 10 X2

Line drawing of a rectangular drawer with a handle and labeled part (X2), no text or symbols present.

A	X8	B	X8	F	X8	G	X8	K	X2
Φ6X32mm
		Φ15X9.5mm		Φ3.5X35mm		Φ3.5X12mm

14

Technical diagram of a wooden table with labeled components and directional arrows indicating movement or flow.

15

Line drawing of a simple wooden table with four legs and one drawer (no text or symbols)

L

B

L	X21

PARAMETRO PRODOTTO

Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Importato negli USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

RAPPRESENTANZA DEL REGNO UNITO

YH CONSULTING LIMITED. C/O YH Consulting

Limited Ufficio 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

Affordable. Reliable. Home Improvement.

ADVERTENCIA

Asamblea de adultos

ESCRITORIO INFANTIL DE MADERA

MODELO:KLCH-03

Affordable. Reliable. Home Improvement.

NIÑOS DE MADERA

ESCRITORIO

MODELO:KLCH-03

Line drawing of a simple wooden desk with four legs and one drawer (no text or symbols)

Exploded view diagram of a mechanical assembly with numbered components for identification

LISTA DE PIEZAS

A	X21+1	B	X21+1	C	X16+1	D	X4
Φ 6X32mm		Φ 15X9.5mm		Φ 8X30mm		25*30mm
E	X19	F	X8	G	X16+1	H	X12
[XBHQ]Φ 5X40mm		Φ 3.5X35mm		Φ 3.5X12mm		M8
J	X12	K	X2			L	X21
Φ 8X60mm						Φ 20
	X1		X1
14mm 5mm

PASO DE MONTAJE

1 A X13 φ 6X32mm 2 K X1 CL CR G X4 φ 3.5X12mm

3 G G CR G G 180° 4 CL G G K X1 CL CR G X4 φ 3.5X12mm

4 1 2 3 4 C C ① ② C C B X6 C X4 Φ 15X9.5mm Φ 8X30mm

B	X3	C	X2
15X9.5mm		8X30mm

φ 15X9.5mm
φ 8X30mm

B	X4	C	X2
15X9.5mm		8X30mm

Φ 15X9.5mm
φ 8X30mm

7

Technical diagram of a multi-panel electronic device with labeled components and E indicators

E	X6

φ 5×40mm

8

Technical diagram of a multi-level electronic device with labeled components and mounting points

C	X8
φ 8X30mm

φ 8×30mm

9

E E E E E E E E E ② ⑥ ⑤

E	X13

5X40mm

10

Technical line drawing of a mechanical assembly with three vertical supports and four base supports, no text or symbols present.

J	X12

φ 8X60mm

11

Technical line drawing of a structural support frame with four vertical supports and mounting holes, labeled D, showing no text or symbols.

D	X4

25*30mm

12

① H H H H H H ⑥ H H H H H H H J

H	X12

13

1 2 3 4

A A 7 A A X2

X2

⑪ ⑨ ⑧ ⑦ X2

F F 10 11 7 X2

G DR G G DL 11 G 10 X2

Line drawing of a rectangular drawer with a handle and labeled part (X2), no text or symbols present.

A	X8	B	X8	F	X8	G	X8	K	X2
Φ6X32mm
		Φ15X9.5mm		Φ3.5X35mm		Φ3.5X12mm

14

Technical diagram of a wooden table with labeled components and directional arrows indicating movement or flow.

15

Line drawing of a simple wooden table with four legs and one drawer (no text or symbols)

L	X21

PARÁMETRO DEL PRODUCTO

Road, Staines-upon-Thames, Surrey, TW18 4AX

REPRESENTANTE CE

E-CrossStu GmbH

Calle Mainz Landstr.69,

Affordable. Reliable. Home Improvement.

OSTRZEŻENIE

Affordable. Reliable. Home Improvement.

DREWNIANE DLA DZIECI

BIURKO

MODEL:KLCH-03

Line drawing of a simple wooden desk with four legs and one drawer (no text or symbols)

Exploded view diagram of a mechanical assembly with numbered components for identification

LISTA CZĘŚCI

A	X21+1	B	X21+1	C	X16+1	D	X4
Φ 6X32mm		Φ 15X9. 5mm		Φ 8X30mm		25*30mm
E	X19	F	X8	G	X16+1	H	X12
Φ 5X40mm		Φ 3. 5X35mm		Φ 3. 5X12mm		M8
J	X12	K	X2			L	X21
[CD48]Φ 8X60mm		300CL DL OR				Φ 20
	X1		X1
14mm 5mm		[RTAH]

KROK MONTAŻU

1 A X13 φ 6X32mm 2 K X1 CL CR G X4 φ 3.5X12mm

3 G G CR G G 180° 4 CL G G K X1 CL CR G X4 φ 3.5X12mm

4 1 2 3 4 C C ① ② C C B X6 C X4 Φ 15X9.5mm Φ 8X30mm

B	X3	C	X2
15X9.5mm		8X30mm

φ 15X9.5mm
φ 8X30mm

B	X4	C	X2
15X9.5mm		8X30mm

Φ 15X9.5mm
φ 8X30mm

7

Technical diagram of a multi-panel electronic device with labeled components and E indicators

E	X6

φ 5×40mm

8

Technical diagram of a multi-level electronic device with labeled components and mounting points

C	X8

φ 8×30mm

9

E E E E E E E E E ② ⑥ ⑤

E	X13
5 × 40mm

φ 5×40mm

10

Technical line drawing of a mechanical assembly with three vertical supports and four base supports, no text or symbols present.

J	X12

φ 8X60mm

11

Technical line drawing of a structural support frame with four vertical supports and mounting holes, labeled D, showing no text or symbols.

D	X4

25*30mm

12

① H H H H H H ⑥ H H H H H H H J

H	X12

13

1 2 3 4

A A 7 A A X2

X2

⑪ ⑨ ⑧ ⑦ X2

F F 10 11 7 X2

G DR G G DL 11 G 10 X2

Line drawing of a rectangular drawer with a handle and labeled part (X2), no text or symbols present.

A	X8	B	X8	F	X8	G	X8	K	X2
6 × 32 mm
		15 × 9.5 mm		3.5 × 35 mm		3.5 × 12 mm

14

Technical diagram of a wooden table with labeled components and directional arrows indicating movement or flow.

15

Line drawing of a simple wooden table with four legs and one drawer (no text or symbols)

L B

L	X21

PARAMETR PRODUKTU

YH CONSULTING LIMITED. C/O YH Consulting Limited

Biuro 147, Centurion House, London Road, Staines-

upon-Thames, Surrey, TW18 4AX

Przedstaw ciel UE

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt nad Menem.

Affordable. Reliable. Home Improvement.

WAARSCHUWING

Volwassen vergadering

HOUTEN KINDERBUREAU

MODEL: KLCH-03

www.vevor.com/support

VEVOR

Affordable. Reliable. Home Improvement.

HOUTEN KINDERKAST

BUREAU

MODEL: KLCH-03

Line drawing of a simple wooden desk with four legs and a front drawer (no text or symbols)

Exploded view diagram of a mechanical assembly with numbered components for identification

ONDERDELENLIJST

A	X21+1	B	X21+1	C	X16+1	D	X4
Φ 6X32mm		Φ 15X9.5mm		Φ 8X30mm		25*30mm
E	X19	F	X8	G	X16+1	H	X12
Φ 5X40mm		Φ 3.5X35mm		Φ 3.5X12mm		M8
J	X12	K	X2			L	X21
[42A8]Φ 8X60mm						Φ 20
	X1		X1
[4320]14mm 5mm		[7721]

MONTAGESTAP

1 A X13 φ 6X32mm 2 K X1 CL CR G X4 φ 3.5X12mm

3 G G CR G G 180° 4 CL G G K X1 CL CR G X4 φ 3.5X12mm

4 1 2 3 4 C C ① ② C C B X6 C X4 Φ 15X9.5mm Φ 8X30mm

B	X3	C	X2
15X9.5mm		8X30mm

φ 15X9.5mm
φ 8X30mm

B	X4	C	X2
15X9.5mm		8X30mm

Φ 15X9.5mm
φ 8X30mm

7

Technical diagram of a multi-panel electronic device with labeled components and E indicators

E	X6
(ZXC)Φ 5X40mm

φ 5×40mm

8

Technical diagram of a multi-level electronic device with labeled components and mounting points

C	X8

φ 8×30mm

9

E E E E E E E E E ② ⑥ ⑤

E	X13

5X40mm

10

Technical line drawing of a mechanical assembly with three vertical supports and four base supports, no text or symbols present.

J	X12

φ 8X60mm

11

Technical line drawing of a structural support frame with four vertical supports and mounting holes, labeled D, showing no text or symbols.

D	X4

25*30mm

12

① H H H H H H ⑥ H H H H H H H H H H J

H	X12

13

1 2 3 4

A A 7 A A X2

X2

⑪ ⑨ ⑧ ⑦ X2

F F 10 11 7 X2

G DR G 11 DL G 10 X2

Line drawing of a rectangular drawer with a handle and labeled part (X2), no text or symbols present.

A	X8	B	X8	F	X8	G	X8	K	X2
6 × 32 mm
		15 × 9.5 mm		3.5 × 35 mm		3.5 × 12 mm

14

Technical diagram of a wooden table with labeled components and directional arrows indicating movement or flow.

15

Line drawing of a simple wooden desk with four legs and one drawer (no text or symbols)

L	X21

PRODUCTPARAMETER

Model	KLCH-03
Veilig laadgewicht	Boven: 100 LBSLade: 50 LBS
Kleur	Licht hout + wit
Productgrootte	990*510*765mm

Fabrikant: Shanghaimuxinmuyeyouxiangongsi Adres:

Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

YH CONSULTING LIMITED. C/O YH Consulting

Limited Kantoor 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC-REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

Technische ondersteuning en e-garantiecertificaat www.vevor.com/support

VEVOR

Affordable. Reliable. Home Improvement.

WARNING

Vuxensamling

BARNSKRIVBORD i TRÄ

MODELL:KLCH-03

www.vevor.com/support

VEVOR

Affordable. Reliable. Home Improvement.

TRÄ BARN

SKRIVBORD

MODELL:KLCH-03

Line drawing of a simple wooden desk with four legs and one drawer (no text or symbols)

Exploded view diagram of a mechanical assembly with numbered components for identification

DELLISTA

A	X21+1	B	X21+1	C	X16+1	D	X4
Φ 6X32mm		Φ 15X9.5mm		Φ 8X30mm		25*30mm
E	X19	F	X8	G	X16+1	H	X12
Φ 5X40mm		Φ 3.5X35mm		Φ 3.5X12mm		M8
J	X12	K	X2			L	X21
[00K2]Φ 8X60mm		CL DL CR DR				Φ 20
	X1		X1
14mm 5mm		[DYSX]

MONTERINGSTEG

1 A X13 φ 6X32mm 2 K X1 CL CR G X4 φ 3.5X12mm

3 G G CR G G 180° 4 CL G G G K X1 CL CR G X4 φ 3.5X12mm

4 1 2 3 4 C C ① ② C C B X6 C X4 Φ 15X9.5mm Φ 8X30mm

B	X3	C	X2
15X9.5mm		8X30mm

φ 15X9.5mm
φ 8X30mm

B	X4	C	X2
Φ15X9.5mm		Φ8X30mm

Φ 15X9.5mm
φ 8X30mm

7

E E E E E E ② ③ ④ ⑤ E E

E	X6

φ 5×40mm

9

E E E E E E E E E ② ⑥ ⑤

E	X13

φ 5×40mm

10

Technical line drawing of a mechanical assembly with three vertical supports and four base supports, no text or symbols present.

J	X12

φ 8X60mm

11

Technical line drawing of a structural support frame with four vertical supports and mounting holes, labeled D, showing no text or symbols.

D	X4

25*30mm

12

① H H H H H H ⑥ H H H H H H H H H H J

H	X12

13

1 2 3 4

A A 7 A A X2

X2

⑪ ⑨ ⑧ ⑦ X2

F F 10 11 7 X2

G DR G G DL 11 G 10 X2

Line drawing of a rectangular drawer with a handle and labeled part (X2), no text or symbols present.

A	X8	B	X8	F	X8	G	X8	K	X2
[cos]
6X32mm		15X9.5mm		3.5X35mm		3.5X12mm

14

Technical diagram of a wooden table with labeled components and directional arrows indicating movement or flow.

15

Line drawing of a simple wooden desk with four legs and one drawer (no text or symbols)

L B

L	X21

PRODUKTPARAMETER

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.