HZ-831 - Kitchen utensil Vevor - Free user manual and instructions

Product Type	Round chafing dish
Brand	VEVOR
Model	HZ-831 / HZ-831B
Dimensions (approx.)	Diameter 40 cm, height 25 cm
Weight (approx.)	2 kg
Power source	Solid fuel (gel or pellets)
Main material	Stainless steel
Lid	Glass (HZ-831) or metal (HZ-831B)
Water pan capacity	Approximately 1.5 L
Food pan capacity	Approximately 2 L
Main functions	Heat and keep food warm
Recommended fuel	Solid fuel only (no gasoline, alcohol)
Ignition	Ignition torch
Safety	Wear gloves mandatory, do not blow to extinguish, metal lid for extinction
Maintenance and cleaning	Clean with warm soapy water, no corrosive solvents, food pan and water pan dishwasher safe
Spare parts	Replacement parts provided (screws, screwdriver)
Repairability	Technical support via www.vevor.com/support
Intended use	Domestic use, keeping dishes warm during buffets, receptions
Precautions	Constant supervision during combustion, do not add hot fuel, do not use for other purposes
Assembly	Simple assembly of legs, handles, frame and supports

Frequently Asked Questions - HZ-831 Vevor

How to assemble the VEVOR HZ-831 chafing dish?

Follow the steps in the manual: attach the legs (②) to the frame (①) using screws (⑪) and nuts (⑫). Add the handles (④), fuel support (⑧), water pan (⑨), and food pan (⑩). The lid (⑬ or ⑭) is placed last. A screwdriver is provided.

What type of fuel to use?

Use only solid fuel (gel fuel or pellets). Never use gasoline, alcohol, or flammable liquids.

How to ignite the fuel?

Use an ignition torch. Never use matches or a lighter directly on the fuel.

How to safely extinguish the fuel?

Close the metal lid of the fuel reservoir. Never blow on the flame.

Can fuel be added while the fire is burning?

No, wait until the fuel is completely extinguished and cooled before adding more.

How to clean the chafing dish?

Clean the frame and lid with warm soapy water and a soft cloth. The food pan and water pan are dishwasher safe. Do not use abrasive or corrosive products.

Should I put water in the water pan?

Yes, fill the water pan with hot water before heating. Monitor the water level as it evaporates into steam.

Is the glass lid heat-resistant?

Yes, the glass lid of model HZ-831 is designed to withstand heat. Handle it with care.

Where to find spare parts or assistance?

Visit www.vevor.com/support for technical support and electronic warranty.

Can I use this chafing dish outdoors?

Yes, provided it is placed on a stable and non-flammable surface. Avoid drafts and never leave it unattended.

USER MANUAL HZ-831 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

ROUND CHAFING DISH

MODEL: HZ-831 / HZ-831B

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually Saving Half in comparison with the top major brands.

MODEL: HZ-831

MODEL: HZ-831B

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.

	Warning-To reduce the risk of injury, user must read instructio manual carefully.
	Wear protective gloves.

SAFETY WARNINGS AND PRECAUTIONS

Thank you for using this product. In order to make sure that you can operate the machine correctly, read this instruction carefully before operation and keep it properly for future reference. Please read the precautions and safety rules on page to ensure your safe use. This manual will outline safety warnings and precautions, operating, maintenance and cleaning. The warnings and instructions reviewed in this manual cannot cover all possible conditions and situations that may occur. Caution and common sense are not built into this product, since we believe that the users will comply with these codes. Before starting a training program or engaging in strenuous endurance activity on the device, please call a doctor.

Please read ALL the instructions before using your product.

1. Children and minors cannot use this product.
2. Only solid fuel can be used as heating fuel. Do not use gasoline, alcohol
3. Please use the ignition torch to ignite the fuel.
4. When the fuel is burning, special personnel shall be assigned to watch it and prevent it from being hit or toppled.
5. Close the metal cover of the container to extinguish the fuel. Do not blow it out.
6. It is not allowed to add new fuel before the burning fuel is extinguished and cooled.
7. Remember to clean the food tray and fuel container after each use.
8. Do not clean with corrosive solvents such as strong acids and alkalis.
9. Please wear gloves when handling the product.
10. Do not use this unit for any purposes other than the indicated usage.
11. Before first use, please clean the product.
12. The product cannot be burned dry.

WARNING: This appliance is not intended for use by young or infirm persons unless supervised by a responsible person to ensure that they use the appliance safely. Young children should be supervised to ensure that they do not play with the product. Pets should stay away from the product.

PRODUCT COMPONENTS

NO.	Part List	Qty
1		X1
2		X3
3		X1
4		X1
5		X1
6		X1
7		X2

NO.	Part List	Qty
8		X1
9		X1
10		X1
11		X6
12		X6
13		X1
14		X1

NOTE:

1. For the convenience of installation, we will give away a screwdriver as a gift.
2. The quantity of parts shown in the manual is the actual usage, and the remaining parts are spare parts.
3. Each set of products uses consistent parts and assembly methods.
4. HZ-831/HZ-831B is only a glass cover and a metal cover, with the same assembly method.

ASSEMBLE

NOTE: Pay attention to the direction of the handle tilting upwards.

NOTE: HZ-831/HZ-831B is only a glass cover and a metal cover, with the same assembly method.

NOTE: Pay attention to the direction of the handle tilting upwards.

NOTE: HZ-831/HZ-831B is only a glass cover and a metal cover, with the same assembly method.

OPERATING INSTRUCTIONS

Before using the appliance for the first time: Peel off promotional and package materials, and check that the cooking plates are clean and dust-free. If necessary wipe them over with a damp cloth. Spread over with an absorbent kitchen towel and wipe off any excess oil.

1. Take all the components out of the box and unwrap.
2. Place the frame on a firm surface (see diagram for included parts).
3. Place the fuel holder at the center of the base carefully.
4. Put the water pan into the frame and fill with water (fill in hot water for heating).
5. Remove the cover from the fuel holder, and ignite the fuel to heat the water (steam from the heated water will keep the food hot).
6. Place food in the food pan and set this pan into the water pan. The food should be suspended above the water. Then, place the cover over the food pan.
7. Replace the cover over the fuel holder to extinguish the burning fuel—do not blow it out.

NOTE:

1. Always use a scald-proof pad when touching the fuel holder. The fuel, fuel holder, and its cover can get extremely hot.
2. For the best heating efficiency, please keep the lid closed when heating, and check the water level periodically, since the hot water will evaporate into steam.

CLEANING, MAINTENANCE, AND STORAGE

1. The frame and cover may be cleaned with warm, soapy water. Never use abrasive materials or scouring pads. Thoroughly wipe off the mild instead of immersing the frame into water. If needed, you can polish it with stainless steel cleaner or glass cleaner without ammonia.
2. Parts that can be cleaned in a commercial dishwasher: Food Pan and Water Pan.

Manufacturer: Shanghai Muxin Muye Co., Ltd.

Address: Shuangcheng Road 803, Nong 11, Hao 1602A-1609 Shi, Baoshan District, Shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET, EASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

MODEL: HZ-831B

NEED HELP? CONTACT US!

C/O YH Consulting Limited Bureau 147,

Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

MODEL: HZ-831 / HZ-831B

MODEL: HZ-831B

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

MODEL: HZ-831 / HZ-831B

MODEL: HZ-831B

Imported in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD

New South Wales 2122 Australia

C/O YH Consulting Limited Office 147,

Casa del centurione, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

electronics www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

MODEL: HZ-831 / HZ-831B

MODEL: HZ-831B

Casa Centurión, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

MODEL: HZ-831 / HZ-831B

MODEL: HZ-831B

NEED HELP? CONTACT US!

C/O YH Consulting Limited Office 147,

Dom Centuriona, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

MODEL: HZ-831 / HZ-831B

MODEL: HZ-831B

NEED HELP? CONTACT US!

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

warranty certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

MODEL: HZ-831 / HZ-831B

MODEL: HZ-831B

NEED HELP? CONTACT US!

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support