JBR-097 - Adjustable seat Vevor - Free user manual and instructions

Product Type	Adjustable Racing Seat
Model	JBR-097
Brand	Vevor
Main Material	Leather (leatherette)
Adjustment Type	Backrest tilt and front/back sliding
Slide	Slider with locking lever
Approximate dimensions (L x W x H)	55 x 60 x 85 cm
Estimated net weight	12 kg
Maximum user weight	150 kg
Number of main parts	5 (seat, slide, M8 screws x4)
Assembly	Recommended for two persons
Recommended use	Racing simulation, gaming
Maintenance and cleaning	Clean with a soft dry cloth; avoid abrasive products
Safety	Do not use if parts are missing or damaged; keep children away during assembly
Repairability	Spare parts available via after-sales service
Technical support	www.vevor.com/support

Frequently Asked Questions - JBR-097 Vevor

What are the dimensions of the Vevor JBR-097 seat?

Approximate dimensions are 55 cm width, 60 cm depth, and 85 cm height. Please check the footprint before purchase.

How to adjust the backrest tilt?

Pull the lever under the seat completely, lean back slowly to the desired angle, then gently return the lever to its initial position until it locks.

How to slide the seat forward or backward?

Press the adjustment lever under the seat to unlock the slide, then move the seat to the desired position. Release the lever to lock.

What is the maximum weight supported by this seat?

The maximum recommended weight is approximately 150 kg. For optimal use, do not exceed this limit.

What material is the seat covered with?

The seat is covered with leather (leatherette), offering comfort and easy maintenance.

How to clean the Vevor JBR-097 seat?

Use a soft dry cloth to dust. For stains, slightly dampen the cloth with mild soapy water, then wipe with a dry cloth. Avoid solvents or abrasive products.

Is it necessary to assemble the seat with two people?

Yes, it is strongly recommended to have two people for assembly to facilitate setup and prevent injuries.

Is the seat compatible with racing simulator chassis?

Yes, this seat is designed for racing simulation. It can be mounted on any compatible chassis via the slides and the provided M8 screws.

What to do if a part is missing or damaged?

Do not use the seat if parts are missing or damaged. Contact after-sales service via www.vevor.com/support to obtain replacement parts.

The adjustment lever is stuck, what to do?

Make sure the lever is fully pulled or pushed. Check that no object is obstructing the mechanism. If the problem persists, contact Vevor technical support.

USER MANUAL JBR-097 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

ADJUSTABLE RACING SEAT

MODEL: JBR-097

We continue to be committed to providing you with tools at competitive prices. "Save Half", "Half Price", or any other similar expressions used by us only represent an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.

VEVOR®

ADJUSTABLE RACING SEAT

Model: JBR-097

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you if there are any technology or software updates on our product.

BEFORE YOU GET STARTED, A FEW POINTERS

Two people assembling will make the assembl process much easier!	During assembly, children should be kept away from the product due to the possible risk of injury.	Do not use this item any components are missing or damaged.

PARAMETER LIST

Model	amount	Size/material	picture
Adjustable racing seat/H-8010B	1	leather

PART LIST

Name	Picture	Quantity
Seat Slider		1
Screw/M8		4

INSTRUCTIONS

BACKREST RECLINE

Pull up fully on the lever and lean back slowly until the backrest is at your desired angle. Then, slowly return the lever to its starting position. Ensure the lever locks back in place.

Press the adjusting lever to move the slider forward or backward.

Manufacturer: Shanghai Muxin Muye Youxian Gongsi

Address: Shuangcheng Road 803, Lane 11, Room 1602A-1609, Baoshan District, Shanghai 200000, CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET, EASTWOOD NSW 2 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Cent

House, London Road, Staines-upon-Thames,

Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr. 69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

BACKREST TILT

A/S YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

BACKREST TILT

C/O YH Consulting Limited Office 147, Centurion

House, London Road, Staines-upon-Thames,

Surrey, TW18 4AX

Przedstawiciel UE

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical support and e-warranty certificate www.vevor.com/support

ADJUSTABLE RACING SEAT

MODEL: JBR-097

NEED HELP? CONTACT US!

BACKREST ADJUSTABLE

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

LUMBAR SUPPORT FOR LYING

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support