HZCD003 - Floating desk Vevor - Free user manual and instructions

USER MANUAL HZCD003 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

FLOATING DESK

USER MANUAL

MODEL:HZCD003

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

FLOATING DESK

MODEL:HZCD003

Isometric line drawing of a simple wooden cabinet with front shelf and side compartments (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of a user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you ag there are any technology or software updates on our product.

SAFETY INSTRUCTIONS

WARNING:

Read this material before using this product. Failure to do so can result in serious injury.

Assembly precautions

1. Assemble only according to these instructions. Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Keep the assembly area clean and well-lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or when under the influence of alcohol drugs or medication.
6. The product capabilities apply to properly and completely assembled products only.
7. Assemble on a flat, level, hard and smooth surface capable of sa supporting the Floating Desk.
8. For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwra and separate all parts in a clean work area.

Use precautions

1. DO NOT SIT OR STAND ON THIS ITEM.
2. This product is not a toy. Do not allow children to play with or item.
3. Do not exceed weight capacities.
4. Use as intended only.
5. Inspect before every use; do not use if parts are loose or damage

SAVE THIS MANUAL

Technical diagram of a mechanical assembly with numbered components and PCS specifications for each part.

INSTRUCTIONS

STEP 1

A

A 8

A x 1PC

STEP 2

D 9

D x 2PCS

STEP 3

B

8 9 B

B x 1PC

STEP 4

1-4 A

A 4

A x 1PC

STEP 5

8 D 9 D

D x 8PCS

STEP 6

B

4 8 B 9

B x 1PC

STEP 7

A

A ③

A x 1PC

STEP 8

D 4 8 9

D x 2PCS

STEP 9

8 3 4 B 9

L

B L

B x 1PC

L x 1PC

STEP 10

Technical diagram showing a mechanical assembly with labeled components and a magnified inset of a bracket with screws and joints.

	I x 3PCS
	J x 6PCS

STEP 11

D 3 4 8 D

D x 4PCS

D x 4PCS

STEP 14

Technical diagram of a mechanical assembly with labeled components and force indicators, including springs, anchors, and supports.

	F × 2PCS
	H × 2PCS
	K × 20PCS
	Q × 2PCS

Q → Q

STEP 20

	H×3PCS
	K×18PCS

STEP 21

C C C C C 7 11 14 14 6 13

C×5PCS

STEP 22

P M 7 P M 14 14 6 13 180°

	P x 4PCS
	M x 2PCS

STEP 23

WALL

Technical line drawing of a twist drill bit with threaded shaft (no text or symbols)

Diagram showing a compass needle with an arrow indicating direction, labeled 'N' (no text or symbols on the diagram itself)

N x 4PCS

STEP 24

E L E L ③ E ⑤ L ④ 6 E ⑦ E ⑪ 11 E ⑥ E L 12 E x 4PCS L x 2PCS

STEP 25

With PVC edge bonding 1 3 5 Ox8 6 10 10 11 12 10 O 10 O

O x 8PCS

STEP 26

G K G 1 K 12 6 G x 1PC K x 4PCS

Isometric line drawing of a cabinet with shelves and a red arrow pointing to the front panel (no text or symbols)

45.35kg , Even Distribution

PRODUCT PARAMETER

Model HZCD003
Safe Loading Weight 45.35kg
Product Size 600*165*1470mm

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim F Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH.

Mainzer Landstr.69, 60329 Frankfurt am Main.

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Isometric line drawing of a simple wooden cabinet with shelves and doors (no text or symbols)

BESOIN D'AIDE? CONTACTEZ-NOUS!

A M6x35mm 10+1PCS B Ø15x9mm 10+1PCS C M4x40mm 5PCS D Ø6x30mm 30+2PCS E M5x60mm 4PCS F 2PCS G 1PC H 5PCS I 3PCS J M3x14mm 6PCS K M3x12mm 42+2PCS L Ø20mm 7PCS M 2PCS N M8x40mm 4PCS O M5x20mm 8+1PCS P M4x12mm 4PCS Q 16x16mm 2PCS 1PC 11 12

INSTRUCTIONS

STEP 1

A

A ⑧

A x 1PC

STEP 2

D 9

D x 2PCS

STEP 3

B

8 B 9

B x 1PC

STEP 4

1-4 A

A ④

A x 1PC

STEP 5

8 D 9 D

D x 8PCS

STEP 6

B

4 8 B 9

B × 1PC

STEP 7

A

A ③

A x 1PC

STEP 8

D 4 8 9

D x 2PCS

STEP 9

8 3 4 B 9

L

B L

B x 1PC

L x 1PC

STEP 10

J I J J J I 2 I I I J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J 1-2 PCS

	I x 3PCS
	J x 6PCS

STEP 11

D 3 4 8 D

D x 4PCS

STEP 14

Technical diagram of a mechanical assembly with labeled components and force indicators, including springs, springs, and force vectors.

	F × 2PCS
	H × 2PCS
	K × 20PCS
	Q × 2PCS

Q → Q

STEP 20

	H×3PCS
	K×18PCS

STEP 21

C C C C C 7 11 14 14 6 13

STEP 22

P M 7 P M 14 14 6 13

180^

Simple curved arrow diagram pointing downward (no text or symbols)

	P x 4PCS
	M x 2PCS

STEP 23

WALL

Technical line drawing of a twist drill bit with threaded shaft and end cap (no text or symbols)

N

N x 4PCS

STEP 24

E L E 3 E 5 L 4 6 E 7 11 E 12 E L E x 4PCS L x 2PCS

STEP 25

With PVC edge bonding 1 3 5 Ox8 6 10 10 11 12 10 O 10 O

O x 8PCS

STEP 26

G K G 1 K 12 6 G x 1PC K x 4PCS

ACHÈVEMENT

Isometric line drawing of a cabinet with a red arrow pointing to the front panel (no text or symbols)

C/O YH Consulting Limited Bureau 147, Centurion House, Route de Londres, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Isometric line drawing of a simple wooden cabinet with shelves and doors (no text or symbols)

A M6x35mm 10+1PCS B Ø15x9mm 10+1PCS C M4x40mm 5PCS D Ø6x30mm 30+2PCS E M5x60mm 4PCS F 2PCS G 1PC H 5PCS I 3PCS J M3x14mm 6PCS K M3x12mm 42+2PCS L Ø20mm 7PCS M 2PCS N M8x40mm 4PCS O M5x20mm 8+1PCS P M4x12mm 4PCS Q 16x16mm 2PCS 1PC 11 12

ANWEISUNGEN

STEP 1

A

A ⑧

A x 1PC

STEP 2

D 9

D x 2PCS

STEP 3

B

8 9 B

B x 1PC

STEP 4

1-4 A

A ④

A x 1PC

STEP 5

8 D 9 D

D x 8PCS

STEP 6

B

4 8 B 9

B × 1PC

STEP 7

A

A ③

A x 1PC

STEP 8

D 4 8 9

D x 2PCS

STEP 9

8 3 4 B 9

L

B L

B x 1PC

L x 1PC

STEP 10

J I J J J I 2 I I I J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J 1-2 PCS

	I x 3PCS
	J x 6PCS

STEP 11

D 3 4 8 D

D x 4PCS

STEP 14

16 A A ① A

A x 4PCS

STEP 17

B L B L 180°

	B×4PCS
	L×4PCS

STEP 18

14 14 D D D 6 4 3 5 1

STEP 19

Technical diagram of a mechanical assembly with labeled components and force indicators, including springs, springs, and force vectors.

	F x 2PCS
	H x 2PCS
	K x 20PCS
	Q x 2PCS

Q → Q

STEP 20

	H×3PCS
	K×18PCS

STEP 21

C C C C C 7 11 14 14 6 13

STEP 22

P M 7 P M 14 14 6 13

180^

Simple curved arrow diagram pointing downward (no text or symbols)

	P x 4PCS
	M x 2PCS

STEP 23

WALL

Technical line drawing of a twist drill bit with threaded shaft and end cap (no text or symbols)

N

N x 4PCS

STEP 24

E L E ③ E ⑤ L ④ 6 E ⑦ E ⑪ 12 E L E x 4PCS L x 2PCS

STEP 25

With PVC edge bonding 1 3 5 Ox8 6 10 10 11 12 10 O 10 O

O x 8PCS

STEP 26

G K G 1 K 12 6 G x 1PC K x 4PCS

FERTIGSTELLUNG

Isometric line drawing of a cabinet with a red arrow pointing to the front panel (no text or symbols)

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Isometric line drawing of a simple wooden cabinet with shelves and doors (no text or symbols)

A M6x35mm 10+1PCS B Ø15x9mm 10+1PCS C M4x40mm 5PCS D Ø6x30mm 30+2PCS E M5x60mm 4PCS F 2PCS G 1PC H 5PCS I 3PCS J M3x14mm 6PCS K M3x12mm 42+2PCS L Ø20mm 7PCS M 2PCS N M8x40mm 4PCS O M5x20mm 8+1PCS P M4x12mm 4PCS Q 16x16mm 2PCS 1PC 11 12

ISTRUZIONI

STEP 1

A

A ⑧

A x 1PC

STEP 2

D 9

D x 2PCS

STEP 3

B

8 9 B

B x 1PC

STEP 4

1-4 A

A ④

A x 1PC

STEP 5

8 D 9 D

D x 8PCS

STEP 6

B

4 8 B 9

B × 1PC

STEP 7

A

A ③

A x 1PC

STEP 8

D 4 8 9

D x 2PCS

STEP 9

8 3 4 B 9

L

B L

B x 1PC

L x 1PC

STEP 10

J I J J J J I 2 I I I J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J 1-2 PCS

	I x 3PCS
	J x 6PCS

STEP 11

D 3 4 8 D

D x 4PCS

STEP 14

Technical diagram of a mechanical assembly with labeled components and force indicators, including springs, springs, and force vectors.

	F × 2PCS
	H × 2PCS
	K × 20PCS
	Q × 2PCS

Q → Q

STEP 20

	H×3PCS
	K×18PCS

STEP 21

C C C C C 7 11 14 14 6 13

STEP 22

P M 7 P M 14 14 6 13

180^

Simple curved arrow diagram pointing downward (no text or symbols)

	P x 4PCS
	M x 2PCS

STEP 23

WALL

Technical line drawing of a twist drill bit with threaded shaft and end cap (no text or symbols)

N

N x 4PCS

STEP 24

E L E 3 E 5 L 4 6 E 7 11 E 12 E L E x 4PCS L x 2PCS

STEP 25

With PVC edge bonding 1 3 5 Ox8 6 10 10 11 12 10 O 10 O

O x 8PCS

STEP 26

G K G 1 K 12 6 G x 1PC K x 4PCS

COMPLETAMENTO

Isometric line drawing of a cabinet with a red arrow pointing to the front panel (no text or symbols)

Importato in AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD

Nuovo Galles del Sud 2122 Australia

Importato negli USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

Isometric line drawing of a simple wooden cabinet with shelves and doors (no text or symbols)

A M6x35mm 10+1PCS B Ø15x9mm 10+1PCS C M4x40mm 5PCS D Ø6x30mm 30+2PCS E M5x60mm 4PCS F 2PCS G 1PC H 5PCS I 3PCS J M3x14mm 6PCS K M3x12mm 42+2PCS L Ø20mm 7PCS M 2PCS N M8x40mm 4PCS O M5x20mm 8+1PCS P M4x12mm 4PCS Q 16x16mm 2PCS 1PC 11 12

INSTRUCCIONES

STEP 1

A

A 8

A x 1PC

STEP 2

D 9

D x 2PCS

STEP 3

B

8 B 9

B x 1PC

STEP 4

1-4 A

A ④

A x 1PC

STEP 5

8 D 9 D

D x 8PCS

STEP 6

B

4 8 B 9

B × 1PC

STEP 7

A

A ③

A x 1PC

STEP 8

D 4 8 9

D x 2PCS

STEP 9

8 3 4 B 9

L

B L

B x 1PC

L x 1PC

STEP 10

J I J J J I 2 I I I J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J 1-2 PCS

	I x 3PCS
	J x 6PCS

STEP 11

D 3 4 8 D

D x 4PCS

STEP 14

16 A A ① A

STEP 17

B L B L 180°

	B×4PCS
	L×4PCS

STEP 18

14 14 D D D 6 4 3 5 1

STEP 19

Technical diagram of a mechanical assembly with labeled components and force indicators, including springs, springs, and force vectors.

	F × 2PCS
	H × 2PCS
	K × 20PCS
	Q × 2PCS

Q → Q

STEP 20

	H×3PCS
	K×18PCS

STEP 21

C C C C C 7 11 14 14 6 13

STEP 22

P M 7 P M 14 14 6 13

180^

Simple curved arrow diagram pointing downward (no text or symbols)

	P x 4PCS
	M x 2PCS

STEP 23

WALL

Technical line drawing of a twist drill bit with threaded shaft and end cap (no text or symbols)

N

N x 4PCS

STEP 24

E L E 3 E 5 L 4 6 E 7 11 E 12 E L E x 4PCS L x 2PCS

STEP 25

With PVC edge bonding 1 3 5 Ox8 6 10 10 11 12 10 O 10 O

O x 8PCS

STEP 26

G K G 1 K 12 6 G x 1PC K x 4PCS

TERMINACIÓN

Isometric line drawing of a cabinet with a red arrow pointing to the front panel (no text or symbols)

45,35 kg, distribución uniforme

PARÁMETRO DEL PRODUCTO

Isometric line drawing of a simple wooden cabinet with shelves and doors (no text or symbols)

POTRZEBUJESZ POMOCY? SKONTAKTUJ SIĘ Z NAMI!

A M6x35mm 10+1PCS B Ø15x9mm 10+1PCS C M4x40mm 5PCS D Ø6x30mm 30+2PCS E M5x60mm 4PCS F 2PCS G 1PC H 5PCS I 3PCS J M3x14mm 6PCS K M3x12mm 42+2PCS L Ø20mm 7PCS M 2PCS N M8x40mm 4PCS O M5x20mm 8+1PCS P M4x12mm 4PCS Q 16x16mm 2PCS 1PC 11 12

INSTRUKCJE

STEP 1

A

A ⑧

A x 1PC

STEP 2

D 9

D x 2PCS

STEP 3

B

8 B 9

B x 1PC

STEP 4

A

A ④

A x 1PC

STEP 5

8 D 9 D

D x 8PCS

STEP 6

B

4 8 B 9

B × 1PC

STEP 7

A

A ③

A x 1PC

STEP 8

D 4 8 9

D x 2PCS

STEP 9

8 3 4 B 9

L

B L

B x 1PC

L x 1PC

STEP 10

J I J J J I 2 I I I J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J 1-2 PCS

	I x 3PCS
	J x 6PCS

STEP 11

D 3 4 8 D

D x 4PCS

STEP 14

16 A A ① A

STEP 17

B L B L 180°

	B×4PCS
	L×4PCS

STEP 18

14 14 D D D 6 4 3 5 1

STEP 19

Technical diagram of a mechanical assembly with labeled components and force indicators, including springs, springs, and force vectors.

	F × 2PCS
	H × 2PCS
	K × 20PCS
	Q × 2PCS

Q → Q

STEP 20

	H×3PCS
	K×18PCS

STEP 21

C C C C C 7 11 14 14 6 13

STEP 22

P M 7 P M 14 14 6 13

180^

Simple curved arrow diagram pointing downward (no text or symbols)

·	P×4PCS
	M×2PCS

STEP 23

WALL

Technical line drawing of a twist drill bit with threaded shaft and circular head (no text or symbols)

Diagram showing a compass needle with a pointer and a labeled north arrow, no text or symbols present.

N x 4PCS

STEP 24

E L E ③ E ⑤ L ④ 6 E ⑦ E ⑪ 12 E L E x 4PCS L x 2PCS

STEP 25

With PVC edge bonding 1 3 5 Ox8 6 10 10 11 12 10 O 10 O

O x 8PCS

STEP 26

G K G 1 K 12 6 G x 1PC K x 4PCS

UKOŃCZENIE

Isometric line drawing of a cabinet with a red arrow pointing to the front panel (no text or symbols)

Importowane do AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Importowane do USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

Przedstawiciel UE

E-CrossStu GmbH.

Mainzer Landstr.69, 60329 Frankfurt nad Menem.

REP WIELKIEJ BRYTANII

YH CONSULTING LIMITED.

C/O YH Consulting Limited Biuro 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Isometric line drawing of a simple wooden cabinet with shelves and doors (no text or symbols)

HULP NODIG? NEEM CONTACT MET ONS OP!

Technical diagram of a mechanical assembly with numbered components and PCS specifications for each part.

INSTRUCTIES

STEP 1

A

A ⑧

A x 1PC

STEP 2

D 9

D x 2PCS

STEP 3

B

8 B 9

B x 1PC

STEP 4

1-4 A

A ④

A × 1PC

STEP 5

8 D 9 D

D x 8PCS

STEP 6

B

4 8 B 9

B × 1PC

STEP 7

A

A ③

A x 1PC

STEP 8

D 4 8 9

D x 2PCS

STEP 9

8 3 4 B 9

L

B L

B x 1PC

L x 1PC

STEP 10

J I J J J I 2 I I I J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J 1-2 PCS

	I x 3PCS
	J x 6PCS

STEP 11

D 3 4 8 D

D x 4PCS

STEP 14

Technical diagram of a mechanical assembly with labeled components and force indicators, including springs, springs, and force vectors.

	F × 2PCS
	H × 2PCS
	K × 20PCS
	Q × 2PCS

Q → Q

STEP 20

	H×3PCS
	K×18PCS

STEP 21

C C C C C 7 11 14 14 6 13

STEP 22

P M 7 P M 14 14 6 13

180^

Simple curved arrow diagram pointing downward (no text or symbols)

	P x 4PCS
	M x 2PCS

STEP 23

WALL

Technical line drawing of a twist drill bit with threaded shaft and end cap (no text or symbols)

N

N x 4PCS

STEP 24

E L E ③ E ⑤ L ④ 6 E ⑦ E ⑪ 12 E L E x 4PCS L x 2PCS

STEP 25

With PVC edge bonding 1 3 5 Ox8 6 10 10 11 12 10 O 10 O

O x 8PCS

STEP 26

G K G 1 K 12 6 G x 1PC K x 4PCS

VOLTOOING

Isometric line drawing of a cabinet with a red arrow pointing to the front panel (no text or symbols)

C/O YH Consulting Limited Kantoor 147, Centurion House, Londen Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Technische ondersteuning en e-garantiecertificaat www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Line drawing of a simple wooden cabinet with shelves and a front panel (no text or symbols)

BEHÖVER HJÄLP? KONTAKTA OSS!

Technical diagram of a mechanical assembly with numbered components and PCS specifications for each part.

INSTRUKTIONER

STEP 1

A

A ⑧

A x 1PC

STEP 2

D 9

D x 2PCS

STEP 3

B

8 9 B

B x 1PC

STEP 4

1-4 A

A ④

A x 1PC

STEP 5

8 D 9 D

D x 8PCS

STEP 6

B

4 8 B 9

B × 1PC

STEP 7

A

A ③

A x 1PC

STEP 8

D 4 8 9

D x 2PCS

STEP 9

8 3 4 B 9

L

B L

B x 1PC

L x 1PC

STEP 10

J I J J J I 2 I I I J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J 1-2 PCS

	I x 3PCS
	J x 6PCS

STEP 11

D 3 4 8 D

D x 4PCS

STEP 14

16 A A ① A

STEP 17

B L B L 180°

	B×4PCS
	L×4PCS

STEP 18

14 14 D D D 6 4 3 5 1

STEP 19

Technical diagram of a mechanical assembly with labeled components and force indicators, including springs, springs, and force vectors.

	F × 2PCS
	H × 2PCS
	K × 20PCS
	Q × 2PCS

Q → Q

STEP 20

	H×3PCS
	K×18PCS

STEP 21

C C C C C 7 11 14 14 6 13

STEP 22

P M 7 P M 14 14 6 13

180^

Simple curved arrow diagram pointing downward (no text or symbols)

	P x 4PCS
	M x 2PCS

STEP 23

WALL

Technical line drawing of a twist drill bit with threaded shaft and end cap (no text or symbols)

N

N x 4PCS

STEP 24

E L E 3 E 5 L 4 6 E 7 11 E 12 E L E x 4PCS L x 2PCS

STEP 25

With PVC edge bonding 1 3 5 Ox8 6 10 10 11 12 10 O 10 O

O x 8PCS

STEP 26

G K G 1 K 12 6 G x 1PC K x 4PCS

KOMPLETTERING

Isometric line drawing of a cabinet with a red arrow pointing to the front panel (no text or symbols)

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support