CD-HG04 - Sports Equipment Vevor - Free user manual and instructions

USER MANUAL CD-HG04 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

HOCKEY GOAL

MODEL: CD-HG04

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represer estimate of savings you might benefit from buying certain tools with us compared to top brands and does not necessarily mean to cover all categories of tools offered by are kindly reminded to verify carefully when you are placing an order with us if you actually saving half in comparison with the top major brands.

MODEL: CD-HG04

Technical line drawing of a mechanical component with grid pattern and cutouts (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you there are any technology or software updates on our product.

Thank you very much for choosing this Product. Please read all of the instructions before using it. The information will help you achieve the best possible results.

INTRODUCTION

WARNING:

Please read all instructions before using this product

It is the Owner's responsibility to ensure that all users of this product are fully aware of all warnings and precautions.

▶ Always inspect the goal post and net for defects before use and replace damaged parts.
▶ Do not use the goal with faulty parts.
▶ The product is gently placed on a flat ground for use.
▶ Never climb on the net or the goal frame. The goal must never I used without the net fitted. Please always adhere to the safety instructions.
▶ Remove all weights and anchors before moving or disassembling the goal. Do not use the goal in windy weather.
▶ Do not use the goal in sub zero temperatures. We advise adult supervision during assembly and use. Do not drop any heavy objects on the tubes.
- When dismantling the goal ensure that all fittings are packed away, and that non are left on the playing surface.
▶ Check whether the installation is firm before use to avoid potential safety hazards.
▶ Check and tighten the screw interface of each component regularly.

▶It should be stored in a dry environment if not used for a long time.

PART LIST

Simple line drawing of a bent pipe or rod with a radius labeled 'a' (no text or symbols beyond the label)

A 1PCS

Line drawing of a bent pipe with a flanged end (no text or symbols)

B 1PCS

C1 1PCS

C2 1PCS

Simple line drawing of a bent pipe or tube with no text or symbols

D 2PCS

Simple line drawing of a T-shaped object with two circular ends labeled 'D' (no text or symbols on the object itself)

E 1PCS

Simple line drawing of a cylindrical object with a textured base and a small protrusion, no text or symbols present.

F 1PCS

Simple curved line drawing with two circular ends and a jagged top edge (no text or symbols)

G1 1PCS

Simple line drawing of a curved pipe or tube with two ends, no text or symbols present

G2 1PCS

J 2PCS M6*50

K 6PCS M6*35

L 8PCS M6*75

Abstract geometric pattern with a diagonal grid of dots on a rounded rectangle (no text or symbols)

M 2PCS

Simple geometric shape with a diamond grid pattern, no text or symbols present

N 1PCS

Geometric shape with a grid pattern, no text or symbols present

O 1PCS

Empty rectangular frame with corner grid pattern (no text or symbols)

P 1PCS

Q 14PCS R 20PCS

S 2PCS

Two types of wrenches shown side by side, one L-shaped and one hexagonal (no text or symbols)

T 1SET

ASSEMBLY

Step 1: Assemble the frame as shown below and lock the screws

① C1 F G1 G2 C2

② A B C2 C1 - 5 -

③

Technical diagram of a mechanical assembly with labeled components A, B, D, E, J and an inset showing a circular component with arrows.

Step 2: Secure the main net to the main frame with an elastic buckle

R R R R R R C2 O R R R R O

Step 3: Attach the main net to the retaining buckle of the main frame with a tiecord.

C2 O Q O C2

Step 4 :Put the two sides together, too

H2 K I2 S H2 H2 K I1 I2 K I1 505 615 H1

Step 5:First use elastic buckle to fix the side net, and then use tie rope to connect the side net to the side frame.

S H2 I2 I1 M H1 Q I1 M

Step 6: Attach the side frame with the net installed to the main frar

S H1 C1 L A L I1 B L C2 L C2 I1 H1 H1 S D

Step 7: As shown, install the top net.

M S N M N M O Q 0/N C2 - 10 -

Step 8:Finally, install the corner bag,Finished.

N O P P R

CLEANING AND MAINTENANCE

▶Clean the stand with a wet towel, the Net can be removed for washing and allowed to dry naturally

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main.

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion

House, London Road, Staines-upon-Thames, Surrey

TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical line drawing of a mechanical component with grid pattern and cutouts (no text or symbols)

BESOIN D'AIDE? CONTACTEZ-NOUS!

Line drawing of a bent pipe with a radius measurement (no text or symbols)

Un 1 pièce

Line drawing of a bent pipe or support structure with no text or symbols

B 1 PIÈCES

C1 1 PIÈCES

C2 1 PIÈCES

Simple line drawing of a bent pipe or rod (no text or symbols)

D 2 PIÈCES

Simple line drawing of a T-shaped object with two vertical rods (no text or symbols)

E 1 PIÈCES

Simple line drawing of a cylindrical object mounted on a two-walled base (no text or symbols)

F 1 PIÈCES

Simple curved line drawing with no text, numbers, or symbols

G1 1 PIÈCES

Simple curved line drawing with two circular ends and a jagged top edge (no text or symbols)

G2 1 PIÈCES

Simple line drawing of a curved pipe or support structure (no text or symbols)

H1 2 pièces

Simple line drawing of a curved pipe or support structure (no text or symbols)

H2 2 pièces

I1 2 pièces

12 2 pièces

J 2 pièces
M6*50

K 6 pièces
M6*35

L 8 PIÈCES
M6*75

Simple geometric shape with a diamond grid pattern, no text or symbols present

M 2 pièces

Rectangular shape filled with a diamond grid pattern (no text or symbols)

N 1 PIÈCES

Geometric diagram of a trapezoid with a grid pattern (no text or symbols)

O 1 PIÈCES

Empty rectangular frame with corner grid pattern (no text or symbols)

P 1 PIÈCES

Q 14 PIÈCES R 20 PIÈCES

S 2 PIÈCES

Two types of wrenches shown side by side, one L-shaped and one hexagonal (no text or symbols)

T 1SET

ASSEMBLÉE

Technical diagram of a mechanical assembly with labeled components and directional arrows, including annotations like 'UN', 'ET', 'D', 'B', and 'J'.

R R R R R R C2 LE R C2 LE

S H2 I2 I1 M H1 Q I1 M

S I1 A L C1 H1 L C2 I1 B L C2 H1 S

M S N M N M G LE Q SUR C2 - 10 -

A/S YH Consulting Limited Bureau 147, Centurion

Maison, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical line drawing of a mechanical component with grid pattern and cutouts (no text or symbols)

Line drawing of a bent pipe or rod with a curved end, no text or symbols present

EIN 1 STÜCK

Line drawing of a bent pipe with a cylindrical end (no text or symbols)

B 1 STK

C1 1 STK

C2 1 STK

Simple line drawing of a bent pipe or rod (no text or symbols)

D 2 STK

Simple line drawing of a T-shaped object with two vertical bars and a base (no text or symbols)

E 1 STK

Simple line drawing of a cylindrical object mounted on a two-walled base (no text or symbols)

F 1 STK

Simple curved line drawing with no text, numbers, or symbols

G1 1 STK

Simple curved line drawing with two circular ends and a jagged top edge (no text or symbols)

G2 1 STK

J 2 STK
M6*50

K 6 STK
M6*35

L 8STK
M6*75

Rectangular shape filled with a diamond grid pattern, no text or symbols present

M 2 STK

Simple geometric shape with a diamond grid pattern inside, no text or symbols present.

N 1 STK

Geometric diagram of a trapezoid with a grid pattern (no text or symbols)

O 1 STK

Empty rectangular frame with corner grid pattern (no text or symbols)

P 1 STK

Q 14 STK R 20 STK

S 2 STK

Two types of wrenches shown side by side, one L-shaped and one hexagonal (no text or symbols)

T 1SET

MONTAGE

Technical diagram of a mechanical assembly with labeled components and a magnified inset showing a circular component with coordinate axes.

R R R R R R C2 C2 R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R BEN

Q DFR C2 C2 DFR

S H2 I2 I1 M H1 Q I1 M

S I1 A L C1 L H1 I1 B L C2 H1 S I1 L C2 H1

M S N M N M Q AN C2 - 10 -

C/O YH Consulting Limited Office 147, Centurion

Haus, London Road, Staines-upon-Thames, Surrey,

TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical line drawing of a mechanical component with grid pattern and cutouts (no text or symbols)

Line drawing of a bent pipe or rod with a curved end, no text or symbols present

Un 1PZ

Line drawing of a bent pipe with a cylindrical end (no text or symbols)

B 1 PZ

C1 1PZ

C2 1 PZ

Simple line drawing of a bent pipe or rod with no text or symbols

D 2 PZ

Simple line drawing of a T-shaped object with two vertical bars and a base (no text or symbols)

E 1 PZ

Simple line drawing of a cylindrical object mounted on a two-walled base (no text or symbols)

F 1PZ

Simple curved line drawing with no text, numbers, or symbols

G1 1 PZ

Simple curved line drawing with two circular ends and a jagged top edge (no text or symbols)

G2 1 PZ

J 2 PZ
M6*50

K 6 PZ
M6*35

L8PZ
M6*75

Rectangular shape filled with a diamond grid pattern, no text or symbols present

M 2PZ

Simple geometric shape with a diamond grid pattern inside, no text or symbols present.

N 1 PZ

Geometric diagram of a trapezoid with a grid pattern (no text or symbols)

O 1 PZ

Empty rectangular frame with corner grid pattern (no text or symbols)

P 1 PZ

Q 14 PZ R 20 PZ

S 2 PZ

Two types of wrenches shown side by side, one L-shaped and one hexagonal (no text or symbols)

T 1SET

ASSEMBLAGGIO

Technical diagram of a mechanical assembly with labeled components and a magnified inset showing a circular component with coordinate axes.

R R R R R R C2 IL IL R R R R R

S H2 I2 I1 M H1 Q I1 M

S I1 A L C1 H1 L C2 I1 B L C2 H1 S

M S N M N M IL Q SU C2 - 10 -

N IL P P R

Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Importato negli USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

C/O YH Consulting Limited Ufficio 147, Centurion

Casa, London Road, Staines-upon-Thames, Surrey,

TW184AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical line drawing of a mechanical component with grid pattern and cutouts (no text or symbols)

Line drawing of a bent pipe with a radius measurement (no text or symbols)

Una pieza

Line drawing of a bent pipe or rod with a flanged end (no text or symbols)

B 1 pieza

C1 1 pieza

C2 1 pieza

Simple line drawing of a bent pipe or rod (no text or symbols)

D 2 piezas

Simple line drawing of a T-shaped object with two vertical bars and a base (no text or symbols)

1 pieza

Simple line drawing of a T-shaped tool or bracket with a cylindrical pin inserted (no text or symbols)

1 pieza

Simple curved line drawing with two circular ends and a jagged top edge (no text or symbols)

G1 1 pieza

Simple line drawing of a curved pipe or tube with two ends, no text or symbols present

G2 1 pieza

Simple line drawing of a curved pipe or support structure (no text or symbols)

H1 2 piezas

Simple line drawing of a curved pipe or support structure (no text or symbols)

H2 2 piezas

I1 2 piezas

12 2 piezas

J 2 piezas M6*50

K 6 piezas M6*35

L 8PCS M6*75

Rectangular shape filled with a diamond grid pattern, no text or symbols present

M 2 piezas

Simple geometric shape with a diamond grid pattern inside, no text or symbols present.

1 pieza

Geometric diagram of a trapezoid with a grid pattern (no text or symbols)

O 1 pieza

Empty rectangular frame with corner grid pattern (no text or symbols)

1 pieza

Two types of wrenches shown side by side, one L-shaped and one hexagonal (no text or symbols)

T 1 CONJUNTO

ASAMBLEA

Technical diagram of a mechanical assembly with labeled components A, B, D and coordinate axes Y0, Y1, showing structural connections and motion indicators.

R R R R R R R C2 EL EL R R R R

S H2 I2 I1 M H1 Q I1 M

S I1 A L C1 L H1 I1 B L C2 H1 S I1 L C2 H1

Technical diagram of a mechanical component with cross-hatched sections, labeled dimensions (R1, R2), and an inset showing internal geometry.

LIMPIEZA Y MANTENIMIENTO

Casa, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical line drawing of a mechanical component with grid pattern and cutouts (no text or symbols)

POTRZEBUJESZ POMOCY? SKONTAKTUJ SIĘ Z NAMI!

Line drawing of a bent pipe with a radius measurement (no text or symbols)

1 SZT.

Line drawing of a bent pipe or support structure with no text or symbols

B 1 SZT.

C1 1 SZT.

C2 1 SZT.

Simple line drawing of a bent pipe or rod (no text or symbols)

D 2 SZT.

Simple line drawing of a T-shaped object with two vertical bars and a base (no text or symbols)

E 1 SZT.

Simple line drawing of a cylindrical object mounted on a two-walled base (no text or symbols)

F 1 SZT.

Simple curved line drawing with no text, numbers, or symbols

G1 1 SZT.

Simple curved line drawing with two circular ends and a jagged top edge (no text or symbols)

G2 1 SZT.

Simple line drawing of a curved pipe or support structure (no text or symbols)

H1 2 SZT.

Simple line drawing of a curved pipe or support structure (no text or symbols)

H2 2 SZT.

I1 2 SZT.

I2 2 SZT.

J 2 SZT.
M6*50

K 6 SZT.
M6*35

L 8szt
M6*75

Rectangular shape filled with a diamond grid pattern, no text or symbols present

M 2 SZT.

Simple geometric shape with a diamond grid pattern inside, no text or symbols present.

N 1 SZT.

Geometric diagram of a trapezoid with a grid pattern (no text or symbols)

O 1 SZT.

Empty rectangular frame with corner grid pattern (no text or symbols)

P 1 SZT.

Q 14 SZT. R 20 SZT.

S 2 SZT.

Two types of wrenches shown side by side, one L-shaped and one hexagonal (no text or symbols)

T 1ZESTAW

MONTAŻ

Technical diagram of a mechanical assembly with labeled components A, B, D, and J, including a magnified inset showing detail view.

R R R R R R C2 TO TO R R R R

S H2 I2 I1 M H1 Q I1 M

S I1 A L C1 H1 L C2 I1 B L C2 H1 S

M S N M N M TO Q NA C2

N P R P T0

CZYSZCZENIE I KONSERWACJA

C/O YH Consulting Limited Biuro 147, Centurion

Dom, London Road, Staines-upon-Thames, Surrey,

TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technische ondersteuning en e-garantiecertificaat www.vevor.com/support

HOCKEYDOEL

MODEL: CD-HG04

Technical line drawing of a mechanical component with grid pattern and curved cutouts (no text or symbols)

HULP NODIG? NEEM CONTACT MET ONS OP!

Line drawing of a bent pipe or rod with a curved end, no text or symbols present

Een 1PCS

Line drawing of a bent pipe or support structure with no text or symbols

B 1STUKS

C1 1 STUKS

C2 1 STUKS

Simple line drawing of a bent pipe or rod with no text or symbols

D 2STUKS

Simple line drawing of a T-shaped object with two vertical bars and a base (no text or symbols)

E 1STUKS

Simple line drawing of a cylindrical object mounted on a two-walled base (no text or symbols)

F 1STUKS

Simple curved line drawing with no text, numbers, or symbols

G1 1 STUKS

Simple curved line drawing with two circular ends and a jagged top edge (no text or symbols)

G2 1 STUKS

J 2PCS
M6*50

K 6STUKS
M6*35

L 8 STUKS
M6*75

Rectangular shape filled with a diamond grid pattern, no text or symbols present

M 2STUKS

Simple geometric shape with a diamond grid pattern inside, no text or symbols present.

N 1STUKS

Geometric diagram of a trapezoid with a grid pattern (no text or symbols)

O 1PCS

Empty rectangular frame with corner grid pattern (no text or symbols)

P 1STUKS

Two types of wrenches shown side by side, one L-shaped and one hexagonal (no text or symbols)

MONTAGE

Technical diagram of a mechanical assembly with labeled components and a magnified inset showing a circular component with coordinate axes.

R R R R R R C2 DE DE R R R R R R

S H2 I2 I1 M H1 Q I1 M

S I1 A L C1 L H1 I1 B L C2 H1 S I1 L C2 H1

C/O YH Consulting Limited Kantoor 147, Centurion Huis, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical line drawing of a mechanical component with grid pattern and cutouts (no text or symbols)

BEHÖVER HJÄLP? KONTAKTA OSS!

Line drawing of a bent pipe with a radius measurement (no text or symbols)

En 1 st

Line drawing of a bent pipe or support structure with no text or symbols

B 1 st

C1 1 st

C2 1 st

Simple line drawing of a bent pipe or rod with no text or symbols

D 2 st

Simple line drawing of a T-shaped object with two vertical rods (no text or symbols)

E 1 st

Simple line drawing of a cylindrical object mounted on a two-walled base (no text or symbols)

F 1 st

Simple curved line drawing with no text, numbers, or symbols

G1 1 st

Simple line drawing of a curved pipe or tube with no text or symbols

G2 1 st

J 2 st M6*50

K 6 st M6*35

L 8 st M6*75

Rectangular shape filled with a diamond grid pattern, no text or symbols present

M 2st

Simple geometric shape with a diamond grid pattern inside, no text or symbols present.

N 1 st

Geometric diagram of a trapezoid with a grid pattern (no text or symbols)

O 1 st

Empty rectangular frame with corner grid pattern (no text or symbols)

P 1 st

Two types of wrenches shown side by side, one L-shaped and one hexagonal (no text or symbols)

MONTERING

Technical diagram of a mechanical assembly with labeled components and a magnified inset showing a circular component with coordinate axes.

R R R R R R C2 DE DE R R R R R

S H2 I2 I1 M H1 Q I1 M

S I1 A L C1 L H1 I1 B L C2 H1 S I1 L C2 H1

M S N M N M DE F PA C2 - 10 -

N P R DE P

RENGÖRING OCH UNDERHÅLL

C/O YH Consulting Limited Office 147, Centurion

House, London Road, Staines-upon-Thames, Surrey,

TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support