FBL760598 - Toilet Vevor - Free user manual and instructions

Product Type	Raised Toilet Seat
Model	FBL760598
Maximum Load	350 lb (approx. 159 kg)
Seat Height Range	490 - 640 mm
Product Dimensions (L x W x H)	525 x 640 x 655-805 mm
Net Weight	3.01 kg
Main Materials	Reinforced Plastic and Steel
Armrests Included	Yes, two armrests
Built-in Storage	Storage bag and towel holder (interchangeable)
Intended Use	Elevating the toilet for easier access
Recommended Surface	Flat and stable floor
Assembly Required	Yes, instructions provided
Cleaning and Maintenance	Mild detergent and warm water, dry thoroughly
Important Safety Instructions	Do not exceed 350 lb; check regularly for wear; use on stable floor
Warranty	3 years against defects in materials and workmanship
Replacement Parts	Use only VEVOR-approved parts
Origin	Made in China

Frequently Asked Questions - FBL760598 Vevor

What is the maximum weight supported by the Vevor FBL760598 raised toilet seat?

The maximum weight is 350 lb (approx. 159 kg). Never exceed this limit for safety.

How to install the raised toilet seat?

Installation is simple: attach the four legs into the main frames, assemble the left and right frames with armrests, insert the seat frame tubes, lock the buttons, and clip the seat plate. Refer to the manual for details.

Is this toilet seat compatible with all toilets?

It is designed for most standard toilets, but check compatibility before first use. The cushion height ranges from 490 to 640 mm.

How to clean the raised toilet seat?

Clean with a mild detergent and warm water, then rinse to remove soap residue. Dry thoroughly after each cleaning.

Does the product come with storage accessories?

Yes, it includes a storage bag and a paper towel holder, which can be installed on the left or right according to your preference.

What is the warranty for the Vevor FBL760598?

VEVOR offers a 3-year warranty against defects in materials and workmanship from the original purchase date.

Can the seat be used by elderly or people with reduced mobility?

Yes, it is specially designed to elevate the toilet for easier access. However, consult your healthcare professional to confirm it meets your specific needs.

How to check assembly safety?

Before each use, ensure the legs are even and locked, all screws are tight, and there are no signs of wear or damage. Stop use if any parts are loose or missing.

Is the product foldable or dismountable for storage?

The manual does not mention folding, but it can be disassembled by following the assembly instructions in reverse for more compact storage.

Where can I get spare parts or technical support?

Contact VEVOR support via their website www.vevor.com/support for assistance or approved parts. Use only original parts.

USER MANUAL FBL760598 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

RAISED TOILET SEAT

MODEL: FBL760598

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent savings you might benefit from buying certain tools with us compared to top brands and does not necessarily mean to cover all categories of tools offered. We kindly remind you to verify carefully when you are placing an order with us that you are actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

RAISED

TOILET SEAT

MODEL: FBL760598

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you if there are any technology or software updates on our product.

Warning - To reduce the risk of injury, users must read the instruction manual carefully.

WARNING:

Read the manual completely to avoid harm, product damage, or warranty voidance. Seek professional help if you encounter discomfort, pain, or worsening symptoms. If necessary, use supervision in order to assemble and use this product correctly and safely. Do not exceed the 350 lbs weight limit.

Regularly check for secure assembly and contact support if in doubt. Ensure product's legs are even and locked before use, and discontinue usage if there are signs of wear, damage, or missing parts. The product is to be used on flat surfaces. Do not disassemble if not necessary, as it might compromise the longevity of the product. Do not modify the product unless specified in the manual. Use only parts approved by VEVOR for this specific product. Confirm the compatibility of the toilet rail with your toilet before first use. The product is not to withstand pressure or impact and is not to be used as a ladder or loaded with heavy objects.

Keep away from children and pets. Contains potentially hazardous small parts - choking hazard. Exercise caution during operation and assembly. Avoid extreme temperatures or open flames. If an allergic reaction occurs, cease use immediately and consult a healthcare professional.

Warranty Policy

We warrant your new VEVOR product to be free from defects in materials and workmanship for 3 years from the original purchase. However, please keep in mind our guarantee policy does not cover counterfeit or replica items, nor does it apply to products purchased from unauthorized resellers or in used condition.

Please note that each purchase is eligible for only one guarantee redemption; we cannot repeatedly refund, replace, or exchange your product. We also kindly ask that you handle the product with care and use it according to the instructions provided. Unfortunately, we cannot cover damage resulting from misuse or abuse of the product. This warranty is not transferable and applies only to the original purchaser.

IMPORTANT

1. Don't exceed the weight capacity - 350 lbs max.
2. Use on stable surfaces only.
3. Regularly inspect for signs of wear, damage, or loose parts.
4. Clean regularly using a mild detergent and warm water, rinse off any soap residue. After cleaning, dry thoroughly.
5. Before use, confirm with your healthcare provider that the product meets your specific needs. The following guidelines are not a substitute for medical advice.

SAVE THESE INSTRUCTIONS

PARAMETER LIST

Model	FBL760598
Rated load (lbs)	350
Seat cushion height range(mm)	490-640mm
Net weight(kg)	3.01
Product size(mm)	525*640*655-805mm

PART LIST

When unpacking this product, check to make sure the parts listed below are included and carefully inspect for any damage that may have occurred during transit. If any part is missing or damaged, do not attempt to assemble or use the product.

NO	PICTURE	PART NUMBER	QTY	NO	PICTURE	PART NUMBER	QTY
1		Left front main frame	1	7		Storage bag	1
2		Left rear main frame	1	8		Right rear main frame	1
3	[H4AX]	Leg tube	4	9		Right front main frame	1
4		seat	1	10		armrest tube	2
5		flat knob	4	11		Seat frame tube	2
6		paper towel holder	1

OPERATION

1. Installation Procedures

1. As shown in the figure, the four legs ③ are installed into the left frame ①, left rear main frame ②, right rear main frame ⑧, and right front main frame ⑨ respectively.

1. As shown in the figure, the assembled left front main frame ①, left rear main frame ②, right rear main frame ⑧, and right front main frame ⑨ are installed into the armrest tube ⑩, so that the marbles of each main frame are ejected.

1. Insert the assembled left and right main frames in alignment with the top openings of the seat frame tube as shown.

1. As shown in the figure, lock the 4 knobs ⑤ into the holes corresponding to the left and right main frames and seat frame tubes in turn.

1. As shown in the figure, snap in the C-clips at the bottom of the seat frame tube ⑪.

1. As shown in the picture, install the storage bag on the right side and the paper towel holder on the left side of the product (Note: the storage bag and the paper towel holder can be exchanged according to the user's preference).

Manufacturer: Zhongshan Bliss Medical Instrument Co., Ltd

Address: 3-6F & 7F-1, No. 63, Tongxing East Road, Yumin Community, Xiaolan, Zhongshan, Guangdong, 528414, CHINA

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET, EASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

Pooledas Group Ltd

Unit 5 Albert Edward House,

The Pavilions Preston, United Kingdom

EC

REP

SHUNSHUN GmbH

Römeräcker 9 Z2021, 76351

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

Manufacturer: Zhongshan Bliss Medical Instrument Co., Ltd Address: 3-6F &

7F-1, No. 63, Tongxing East Road, Yumin Community Xiaolan, Zhongshan, Guangdong, 528414,

CHINA Imported in AUS: SIHAO PTY LTD. 1

ROKEVA STREET, ASTWOOD NSW 2122, Australia

NEED HELP? CONTACT US!

Manufacturer: Zhongshan Bliss Medical Instrument Co., Ltd Address: 3-6F &

7F-1, No. 63, Tongxing East Road, Yumin Community Xiaolan, Zhongshan, Guangdong, 528414, CHINA

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

7F-1, No. 63, Tongxing East Road, Yumin Community Xiaolan, Zhongshan, Guangdong, 528414, CHINA

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA

STREET EASTWOOD NSW 2122 Australia

electronics www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

7F-1, No. 63, Tongxing East Road, Yumin Community Xiaolan, Zhongshan, Guangdong, 528414,

CHINA Imported to AUS: SIHAO PTY LTD. 1

ROKEVA STREET EASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

Pooledas Group Ltd

NEED HELP? CONTACT US!

Manufacturer: Zhongshan Bliss Medical Instrument Co., Ltd Address: 3-6F and 7F-1, No.

63, Tongxing East Road, Yumin Community Xiaolan, Zhongshan, Guangdong, 528414, CHINA Import to

Australia: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD

NSW 2122 Australia

Import to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical support and e-warranty certificate www.vevor.com/support

RAISED TOILET SEAT

MODEL: FBL760598

NEED HELP? CONTACT US!

Manufacturer: Zhongshan Bliss Medical Instrument Co., Ltd Address: 3-6F & 7F-1,

No. 63, Tongxing East Road, Yumin Community Xiaolan, Zhongshan, Guangdong, 528414, CHINA

Imported into AUS: SIHAO PTY LTD. 1 ROKEVA

warranty certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

Manufacturer: Zhongshan Bliss Medical Instrument Co., Ltd. Address: 3-6F &

7F-1, No. 63, Tongxing East Road, Yumin Community Xiaolan, Zhongshan, Guangdong, 528414, CHINA

Imported into AUS: SIHAO PTY LTD. 1 ROKEVA

STREETEASTWOOD NSW 2122 Australia

Imported into USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place,

Rancho Cucamonga, CA 91730

UK

REP

Pooledas Group Ltd

Unit 5 Albert Edward House,

The Pavilions Preston, UK

EC

REP

SHUNSHUN GmbH

Römeräcker 9 Z2021, 76351

Linkenheim-Hochstetten, Germany

Made in China

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support