GJ01 - Shelf accessories Vevor - Free user manual and instructions

Find the device manual for free GJ01 Vevor in PDF.

Vevor GJ01 - Shelf accessories
📄 39 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Vevor GJ01 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypeShelf Accessories (Shelf Clips)
BrandVevor
ModelGJ01
MaterialSPCC (Cold Rolled Steel)
Thickness1 mm
Package Contents40 pieces
Clip Dimensions17 x 13 mm (approx.)
Main FunctionShelf support on guide rail
InstallationRequires guide rails (not included) and self-tapping screws
UsageIndoor, for cabinet shelves
ColorSilver
Maximum LoadNot specified
Number of Mounting Holes2 holes per clip
Screw Hole DiameterApproximately 3 mm
Included AccessoriesShelf clips only
Care and CleaningWipe with a dry cloth
SafetyUse with compatible rails; do not exceed recommended load
Spare PartsNot available individually
RepairabilityNot repairable, replace if damaged
WarrantyStandard manufacturer warranty
Country of OriginChina
General InformationManual available in multiple languages

Frequently Asked Questions - GJ01 Vevor

Which rails are compatible with Vevor GJ01 shelf clips?
Vevor GJ01 clips are designed to be used with standard shelf guide rails (not included). It is recommended to choose a rail of the same thickness (1 mm) and compatible dimensions.
How many clips are included in the package?
The package contains 40 Vevor GJ01 shelf clips.
What material are the Vevor GJ01 clips made of?
The clips are made of SPCC steel (cold rolled steel) with a thickness of 1 mm.
What is the maximum load supported by each clip?
The maximum load is not specified by the manufacturer. It is advised to distribute the weight evenly and not overload the shelves.
How to install Vevor GJ01 shelf clips?
1) Install the guide rail on the cabinet panel using self-tapping screws. 2) Snap the shelf clips onto the rail. 3) Make sure all rails are at the same height. 4) Place the shelf board on the clips.
Are Vevor GJ01 clips sold with screws and rails?
No, the product includes only the shelf clips. Guide rails and screws must be purchased separately.
What are the exact dimensions of Vevor GJ01 clips?
According to the technical diagram, the clips measure approximately 17 mm long, 13 mm wide, and 1 mm thick. Please check the manual for exact dimensions.
How to maintain the shelf clips?
Simply wipe the clips with a dry cloth to remove dust. Avoid using harsh chemicals that could damage the coating.
Where can I find the complete user manual?
The complete manual is available for free download on notice-facile.com for the Vevor GJ01. It is available in multiple languages.
Is there a warranty on these shelf clips?
Yes, Vevor offers a standard manufacturer's warranty. The terms are detailed in the electronic warranty certificate included in the manual.

User questions about GJ01 Vevor

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

Your email remains private: it is only used to notify you if someone answers your question.

No questions yet. Be the first to ask one.

Download the instructions for your Shelf accessories in PDF format for free! Find your manual GJ01 - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GJ01 by Vevor.

USER MANUAL GJ01 Vevor

Affordable. Reliable. Home Improvement.

SHELF CLIPS

MODEL: GJ01

Technical Support and E-Warranty Certificate

www.vevor.com/support

Line drawing of a mechanical bracket or support structure (no text or symbols)

1ModelGJ01
2packing quantity40 PCS
3MaterialsSPCC
4Thickness1 mm

This is the original instruction; please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product received. Please forgive us for not informing you again if there are technology or software updates on our product.

Thank you very much for choosing this product. Shelf clips are an installation accessory. Please select the appropriate guide rail to work with it before installation.

Please read all of the instructions before using it. The information will help you achieve the best possible results.

Product Structure

Dimension Figure Matching mounting holes are as followsVevor GJ01 - Product Structure - 1

R0.50 3 3.50 10 5 3.50 13 13 17

Installation introduction

(Note: This product only includes shelf clips; other accessories are to be provided by the customer.)

  1. Install the shelf track on the ward board with self-tapping screws.

Board

  1. Install the shelf clips onto the shelf as shown.

Simple line drawing of a vertical pole with a circular hole, no text or symbols present

Simple line drawing of a mechanical component inside a circular frame (no text or symbols)

  1. Repeat steps 1 and 2 to install the remaining shelf track and shelf clips (Note: All 4 shelf tracks must be of the same height)
  2. Finally, place the board on the shelf clips.

Line drawing of a multi-level shelving unit with vertical supports and circular annotations (no text or symbols)

Technical line drawing of a mechanical support structure (no text or symbols)

Technical line drawing of a structural support frame with vertical supports and horizontal beams (no text or symbols)

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

EC REP: E-CrossStu GmbH. Mainzer Landstr.69, 60329 Frankfurt am Main.

UK REP: YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion Hc London Road, Staines-upon-Thames, Surrey, TW18 4AX

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR

Affordable. Reliable. Home Improvement.

SHELF CLIPS

MODEL: GJ01

www.vevor.com/support

Line drawing of a mechanical bracket or support structure (no text or symbols)

Technical line drawing of a mechanical support structure with mounting brackets and a circular boundary (no text or symbols)

Technical line drawing of a structural frame or support structure (no text or symbols)

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Room 1602A-1609, No. 11, Lane 803, Shuangcheng Road, Baoshan District, Shanghai 200000, CN.

EU REPRESENTATIVE: E-CrossStu GmbH. Mainzer Landstr. 69, 60329

Affordable. Reliable. Home Improvement.

REGALCLIPS

MODEL: GJ01

www.vevor.com/support

Line drawing of a mechanical bracket or support structure (no text or symbols)

1ModellGJ01
2Verpackungsmenge40 STK
3MaterialienSPCC
4Dicke1 mm

Technical line drawing of a mechanical support structure with vertical bars and mounting brackets (no text or symbols).

Technical line drawing of a structural frame with vertical supports and horizontal beams (no text or symbols).

Manufacturer: Shanghai Muxin Wood Industry Co., Ltd.

Address: Room 1602A-1609, No. 11, Lane 803, Shuangcheng Road, Baoshan District, Shanghai 200000, CN.

UK REP: YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Imported into Australia by: SIHAO PTY LTD. 1 ROKEVA STREET, EASTWOOD NSW 2122, Australia. Imported into the USA by: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR

Affordable. Reliable. Home Improvement.

SHELF CLIP

MODEL: GJ01

www.vevor.com/support

Line drawing of a mechanical bracket or support structure (no text or symbols).

Technical line drawing of a mechanical support structure with no visible text or symbols.

Technical line drawing of a structural frame with vertical supports and horizontal beams (no text or symbols).

Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 9173 0

VEVOR

Affordable. Reliable. Home Improvement.

SHELF CLIPS

MODEL: GJ01

www.vevor.com/support

Line drawing of a mechanical bracket or support structure (no text or symbols).

Technical line drawing of a mechanical support structure (no text or symbols).

Technical line drawing of a structural frame with vertical supports and horizontal beams (no text or symbols).

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey

TW18 4AX

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho

Cucamonga, CA 9173 0

VEVOR

Affordable. Reliable. Home Improvement.

ARCH CLAMPS

MODEL: GJ01

www.vevor.com/support

Line drawing of a mechanical bracket or support structure (no text or symbols).

Technical line drawing of a mechanical support structure with vertical bars and mounting brackets (no text or symbols).

Technical line drawing of a structural frame with vertical supports and horizontal beams (no text or symbols).

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200000 CN.

EU Representative: E-CrossStu GmbH. Mainzer Landstr.69, 60329 Frankfurt am Main.

UNITED KINGDOM: YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Imported into AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Aus Imported into USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR

Affordable. Reliable. Home Improvement.

PLATE CLAMPS

MODEL: GJ01

www.vevor.com/support

Line drawing of a mechanical bracket or support structure (no text or symbols).

1ModelGJ01
2verpakkingshoeveelheid40 STUKS
3MaterialenSPCC
4Dikte1mm

Technical line drawing of a mechanical support structure with vertical bars and mounting brackets (no text or symbols).

Technical line drawing of a structural frame or support structure (no text or symbols).

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200000 CN.

EC REP: E-CrossStu GmbH. Mainzer Landstr.69, 60329 Frankfurt am Main.

UK REP: YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Affordable. Reliable. Home Improvement.

HYLLKLÄMMOR

MODEL: GJ01

www.vevor.com/support

Line drawing of a mechanical bracket or support structure (no text or symbols).

Simple line drawing of a mechanical component inside a circular frame (no text or symbols).

Technical line drawing of a mechanical support structure with vertical supports and a triangular base (no text or symbols).

Technical line drawing of a structural frame with vertical supports and horizontal beams (no text or symbols).

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, Baoshanqu, Shanghai 200000 CN.

EC REP: E-CrossStu GmbH. Mainzer Landstr.69, 60329 Frankfurt am Main.

UK REP: YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET, EASTWOOD NSW 2122, Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho

Cucamonga, CA 91730

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Vevor

Model : GJ01

Category : Shelf accessories