FBL825308 - Medical walker Vevor - Free user manual and instructions

Brand	Vevor
Model	FBL825308
Product Type	Medical Walker (standard assisted walking)
Load Capacity	350 lb (approx. 159 kg)
Main Frame	Left and Right
Number of Foot Tubes	4
Handles	With red folding button
Brakes	Sensitive, check before use
Folding	Foldable by pressing on the armrests
Warranty	1 year (excluding wear parts)
Technical Support	www.vevor.com/support
Country of Import	United States (Sanven Technology Ltd.)
Material	Aluminum or steel (not precisely specified)
Usage	Indoor and outdoor, with recommended supervision
Cleaning	Damp cloth, do not immerse
Maintenance	Regularly check the tightness of screws and condition of brakes
Repairability	Spare parts available via customer service

Frequently Asked Questions - FBL825308 Vevor

How to assemble the Vevor FBL825308 walker?

Separate the left and right handrails by forcefully pulling them apart. Insert the foot tubes into the holes of the main frame, aligning the holes and pushing the marble inward until it comes out. Repeat for the remaining three tubes.

How to fold the walker for storage?

Press and hold the red button with one finger while pushing the handle toward the inside of the main frame to fold the armrest. Repeat on the other side.

What is the maximum weight supported by this walker?

The maximum load capacity is 350 lb (approx. 159 kg). Do not exceed this limit.

How to adjust the handle height?

The manual does not specify height adjustment. If your model allows it, look for an adjustment button on the uprights. Otherwise, the height is fixed.

How to use the brakes on the walker?

The brakes are sensitive. Before each use, confirm they work properly. To brake, lower the handles or operate the levers depending on the model.

How to clean the walker?

Use a damp cloth with a mild detergent. Never immerse the device in water. Dry thoroughly after cleaning.

What is the warranty on this product?

Vevor warrants the device (excluding parts) against defects in workmanship and materials for 1 year from the date of shipment.

Where can I get spare parts or technical support?

Visit www.vevor.com/support for technical support and the electronic warranty certificate. Contact customer service by email available 24/7.

Can I use the walker unsupervised?

No. It is strongly recommended to use the device in the company of family or friends to avoid accidents, especially if your physical condition is fragile.

What to do if the walker seems loose or damaged?

Immediately stop using it and contact customer service via www.vevor.com/support for repair or replacement instructions.

USER MANUAL FBL825308 Vevor

Technical Support and E-Warranty Certificate

www.vevor.com/support

STANDARD ASSISTED DRIVING

MODEL: FBL825308

We continue to be committed to providing you with tools at competitive prices. Expressions such as "Save Half", "Half Price", or any other similar expressions used by us represent an estimate of savings you might benefit from when buying certain products from us compared to the major top brands, and do not necessarily cover all categories of tools offered by us. You are kindly reminded to carefully consider whether you are actually comparing with the top major brands when placing an order with us.

MODEL: FBL825308

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves the right to interpret the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of any technology or software updates on our product.

Preface

First of all, let us express our heartfelt thanks to our customers who purchased our equipment. This manual is for customer service to make better use of this equipment. We hope the company's products and services will bring you convenience and courtesy.

Pay attention

This product must be used in strict accordance with the methods described in the manual. Any misuse or use by any other methods may cause damage. The company does not give any guarantee of any kind, including (but not limited to) marketability or implied warranties of fitness for a particular purpose.

The company accepts no liability. The company shall not be liable for errors contained in this material, or for any incidental or consequential damages resulting from the provision, actual performance, or use of the manual.

This manual contains proprietary information protected by patent law. All rights reserved. Without the written consent of the Company, this manual may not be photocopied, copied, or translated in any part into any language.

The content contained in this manual may be changed without prior notice.

Manufacturer's liability

The Company shall be held responsible for the safety and reliability of performance of the equipment only if the assembly, operation, repair, and maintenance are carried out by personnel approved by the Company, the electrical equipment concerned conforms to national standards, and the equipment is used in accordance with the operating instructions.

Guarantee

Manufacturing process and raw materials: The Company guarantees that the Equipment (except parts) is in regular use and repair condition, free from manufacturing process and raw material faults for one year from the date of shipment. None of our inspections is perfect.

PRECAUTIONS

Precautions for use

Warning:

1. If the equipment feels loose, falls, or is damaged, please contact the company in time.
2. Keep the work area clean and well lit. Cluttered or dark areas invite accidents.
3. Keep children and bystanders away while operating; distractions will cause you to lose control.
4. During normal use, please use with the accompaniment of family or friends.
5. Use reasonably according to your own situation, and do not overdo it when your body is not in a timely manner.
6. BEFORE USE, PLEASE CONFIRM WHETHER THE COMPONENTS ARE COMPLETE, WHETHER THE BRAKE IS SENSITIVE, AND ASSEMBLE THE ENTIRE PRODUCT IN STRICT ACCORDANCE WITH THE INSTRUCTIONS.
7. CLEANING PRODUCTS NEED TO BE WASHED WITH WATER AND DRIED IN TIME. IF THE SURFACE COATING OF THE PRODUCT HAS SCRATCHES AND FALLS OFF, REPAIR MATERIALS NEED TO BE USED IN TIME TO ACHIEVE THE BEST ANTI-RUST EFFECT.
8. PLEASE ENSURE THAT THE REAR WHEEL OF THE PRODUCT IS LOCKED TO AVOID SLIDING WHEN THE USER STAYS IN A SLOPING ENVIRONMENT.
9. PLEASE ENSURE THAT THE FOLDING MECHANISM OF THE SEAT PLATE IS LOCKED WHEN USING THIS PRODUCT.

SAVE THESE INSTRUCTIONS

PRODUCT PARAMETERS

Product Name	Standard assisted driving
model	FBL825308
Load bearing capacity/lb	350lbs

PRODUCT COMPONENTS

1

Left main frame

1

2

Right main frame

4

INSTALLATION STEPS

1. As shown in the figure: Use force to pull the left and right handrails on both sides, then insert the foot tube assembly into the hole on the side of the main frame, align it with the hole position, and press inward until it pops out.

1. As shown in the figure: Insert the remaining three foot tubes into the frame according to the operation in step 1.

1. As shown in the figure: Press and hold the red button with one finger while using the other hand to hold the handle and apply force toward the inside of the main frame to fold the armrest, and operate the other the same way. After folding, it is shown in the following figure.

Nice Service: 100% tested before leaving the factory and 24-hour friendly email customer service.

Manufacturer: Zhongshan Bliss Medical Instrument Co., Ltd

Address: 3-6F & 7F-1, No. 63, Tongxing East Road, Yumin Community

Xiaolan, Zhongshan, Guangdong, 528414, CHINA

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Ma

VEVOR

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

ASSEMBLE THE PRODUCT IN STRICT ACCORDANCE WITH

THE INSTRUCTIONS.

1. CLEANING PRODUCTS MUST BE WASHED WITH WATER AND

DRIED IN TIME. IF THE SURFACE COATING OF THE PRODUCT HAS

SCRATCHES AND FALLS, REPAIR MATERIALS MUST BE

USED IN TIME TO OBTAIN THE BEST ANTI-RUST EFFECT.

1. PLEASE ENSURE THAT THE REAR WHEEL OF THE PRODUCT IS

LOCKED TO PREVENT SLIPPING WHEN THE USER STAYS IN A

SLOPING ENVIRONMENT.

1. PLEASE ENSURE THAT THE FOLDING MECHANISM OF THE SEAT PLATE IS LOCKED WHEN USING THIS PRODUCT.

SAVE THESE INSTRUCTIONS

PRODUCT PARAMETERS

Manufacturer: Zhongshan Bliss Medical Instrument Co., Ltd

Address: 3-6F and 7F-1, No. 63, Tongxing East Road, Yumin Community

Xiaolan, Zhongshan, Guangdong, 528414, CHINA

Imported in Australia: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122

Australia

C/O YH Consulting Limited Bureau 147,

Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main

VEVOR

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

STANDARD ASSISTED DRIVING

MODEL: FBL825308

Address: 3-6F & 7F-1, No 63, Tongxing East Road, Yumin Community

Xiaolan, Zhongshan, Guangdong, 528414, CHINA

Imported into Australia: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Imported into the USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR

TOUGH TOOLS, HALF PRICE

electronics www.vevor.com/support

STANDARD ASSISTED GUIDE

MODEL: FBL825308

Imported into AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122

Australia

Imported into USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho

Cucamonga, CA 91730

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main.

VEVOR

TOUGH TOOLS, HALF PRICE

Technical support certificate electronic warranty

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical support and warranty certificate

e-mail: www.vevor.com/support

STANDARD ASSISTED DRIVING

MODEL: FBL825308

We remain committed to providing you with competitive tools.

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr. 69, 60329 Frankfurt am Main.

VEVOR

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR

TOUGH TOOLS, HALF PRICE

Manufacturer: Zhongshan Bliss Medical Instrument Co., Ltd

Xiaolan, Zhongshan, Guangdong, 528414, China

Imported into Australia: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Imported into USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main.

VEVOR

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

STANDARD ASSISTED DRIVING

MODEL: FBL825308

NEED HELP? CONTACT US!

Address: 3-6F & 7F-1, No. 63, Tongxing East Road, Yumin Community

Xiaolan, Zhongshan, Guangdong, 528414, CHINA

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Imported to the US: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main.

VEVOR

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

STANDARD ASSISTED DRIVING

MODEL: FBL825308

Address: 3-6F & 7F-1, No. 63, Tongxing East Road, Yumin Community

Xiaolan, Zhongshan, Guangdong, 528414, CHINA

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main.

VEVOR

TOUGH TOOLS, HALF PRICE

www.vevor.com/support