GMZJ01 - Vehicle storage tool Vevor - Free user manual and instructions

Product Type	Vehicle storage tool (Jeep doors and roof)
Brand	Vevor
Model	GMZJ01
Compatible Vehicles	Jeep Wrangler JK JL (2007-2023), Gladiator JT
Main Material	Steel, rubber, EVA foam
Main Function	Transport and storage support for Jeep doors and roofs
Number of Wheels	4 (2 with brakes, 2 without brakes)
Protection	Anti-collision rubber, shock-absorbing EVA foam, square rubber plugs
Package Contents	Main body A and B, connecting tubes, protection rubber, fixing supports, wheels, screws, nuts, washers, manual
Installation	Screw assembly with basic tools
Safety	Wheel brakes, anti-shock protection, moderate tightening of fasteners
Maintenance	Wipe with a damp cloth, non-corrosive cleaners, store dry
Warranty	Electronic warranty certificate at www.vevor.com/support
Technical Support	www.vevor.com/support
Country of Origin	Not specified (likely Chinese manufacture)

Frequently Asked Questions - GMZJ01 Vevor

Which Jeep models are compatible with the GMZJ01?

The GMZJ01 is compatible with Jeep Wrangler JK, JL and Gladiator JT from 2007 to 2023.

Is the product delivered assembled?

No, the GMZJ01 is delivered as a kit. You must assemble parts A, B, C, etc. using the provided screws, nuts and washers. An instruction manual is included.

What tools are needed for assembly?

A cutter for packaging, protective gloves, and standard screwdriving tools (hex key, etc.) are recommended. The manual specifies the use of M8 and M10 screws.

Can the support accommodate front and rear doors?

Yes, the GMZJ01 is designed to transport and store Jeep doors (front and rear) and roofs. The side supports and main structure ensure stable holding.

How to avoid scratches on the doors?

The product is equipped with black foam and shock-absorbing EVA foam. Additionally, protection rubber is provided. Make sure to position these protections correctly before fixing the parts.

What is the maximum supported weight?

The manual does not specify a maximum load. It is advised to follow the recommended configuration and not exceed the intended use (standard doors and roof).

Are the wheels with brakes sufficient to stabilize the support?

Yes, two wheels are equipped with brakes to lock the movement. Tighten the brakes after positioning the support to prevent any movement during loading or unloading.

How to maintain the GMZJ01?

Wipe the surface with a damp cloth to remove dust. Do not use corrosive cleaners. Store it in a dry, ventilated place if not used for a long time to avoid rust.

Where to find technical support or warranty?

Visit www.vevor.com/support for technical support and the electronic warranty certificate.

Can I use this product for vehicles other than Jeep?

The GMZJ01 is specially designed for Jeep Wrangler and Gladiator. Using it on other vehicles is not recommended as the fixings and dimensions may not match.

USER MANUAL GMZJ01 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

JEEP DOOR AND ROOF STORAGE TOOLS

MODEL: GMZJ01

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cc all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually Saving Half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

JEEP DOOR AND ROOF

STORAGE TOOLS

MODEL: GMZJ01

3D rendering of a metal frame structure with vertical supports and wheels (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of o user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you ag there are any technology or software updates on our product.

SAFETY PRECAUTIONS

• During installation and use, be sure to wear protective gloves to prevent hair injuries.
• When using a box cutter or other sharp tools to remove packaging, be ex careful to avoid cutting yourself and those around you.
• Ensure that the vehicle is in a stable parked state during installation. Pull handbrake and use wheel chocks if necessary to prevent the vehicle from sli
• When tightening nuts and washers, pay attention to the appropriate force to avoid damaging parts or stripping threads due to excessive force.

PRODUCT DESCRIPTION

This product is specifically designed for 07 - 17 Jeep Wrangler and Unlimited used for carrying and storing doors and roofs. The main bracket and side by cooperate to form a stable support structure that can firmly hold the doors a roofs. The black foam and EVA foam effectively cushion and prevent scratch and damage to vehicle parts during carrying and storage. The combination of wheels with brakes and without brakes facilitates flexible movement and precise positioning in different sites. The cap nuts and lock washers ensure the stability the overall structure, providing Jeep owners with a convenient, safe and efficient solution for vehicle modification, repair, long-term part storage and other scenarios.

Compatible vehicle models: Jeep Wrangler, JK JL, Gladiator JT 2007-2023

JK JL、Gladiator JT

PRODUCT PARAMETERS

SN	Name/Quantity	picture
1	Main Body A * 1 PCS
2	Main Body B * 1 PCS
3	Connecting Tube * 2 PCS
4	Protective Rubber * 4 PCS
5	Fixed Bracket * 4 PCS
6	Wheels without Brakes * 2 PS
7	Wheels with Brakes * 2 PCS
8	Hexagon Socket Head Cap Screw M8 * 55/16 PCS
9	Hexagon Nut M8/16 PCS
10	Plain Washer M8/16 PCS
11	Spring Washer M8/16 PCS
12	Cap Nut M10/4 PCS
13	Lock Washer * 4 PCS
14	Anti-collision Rubber (Pre-installed) * 4 PCS
15	Square Rubber Plug (Pre-installed) * 8 PCS
16	Instruction Manual * 1 PCS

INSTALLATION INSTRUCTIONS

1. Connect the parts “A”, “B” and “C” together in the following way (The circled near part “B”).

Structural frame diagram with labeled points A, B, and C, showing structural components without any text or symbols.

1. Tighten parts “A”, “B” and “C” with parts “G”, “H”, “I” and “J”.

Technical illustration of mechanical components including a cylindrical pin, a close-up view of a hand holding a tool, and a bracket with labeled parts A, B, C (no text or symbols on main objects)

1. Install part “D+(Stick D1 on the inner side of D to protect the items.) lock it with parts “G”, “H” and “J”.

1. Install parts "E" and "F" and lock them with part "K".

Mechanical assembly diagram showing motor stator, frame components, and a hand adjusting a bracket (no text or symbols present)

PRODUCT MAINTENANCE INSTRUCTIONS

• Regularly check whether the connections of each part are loose. If loose, it them in time with appropriate tools.
• Gently wipe the surface of the product with a damp cloth to remove dust stains and keep the appearance clean.
• Avoid using corrosive cleaners to prevent damage to the material of the pr
• When not in use for a long time, store it in a dry and ventilated environ prevent parts from rusting, aging or deforming.

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

3D rendering of a metal frame structure with vertical supports and wheels (no text or symbols)

BESOIN D'AIDE? CONTACTEZ NOUS!

PARAMÈTRES DU PRODUIT

Structural diagram of a metal frame with labeled points A, B, and C, showing support beams and a highlighted section (no text or symbols beyond labels)

Technical illustration showing mechanical components and a bracket assembly (no text or symbols)

Exploded view of a mechanical bracket assembly with labeled D+D1 component (no text or symbols on parts)

Mechanical assembly diagram showing a wheel-mounted frame with mechanical components and a close-up of a hand adjusting a component (no text or symbols present)

INSTRUCTIONS D'ENTRETIEN DU PRODUIT

3D rendering of a metal frame structure with vertical supports and wheels (no text or symbols)

Structural diagram of a metal frame with labeled points A, B, and C, showing support beams and a highlighted section (no text or symbols beyond labels)

Technical illustration showing mechanical components and a bracket assembly (no text or symbols visible)

Exploded view of a mechanical assembly with labeled component D+D1 (no text or symbols on parts)

Mechanical assembly diagram showing a wheel-mounted frame with mechanical components and a close-up of a hand adjusting a component (no text or symbols present)

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

3D rendering of a metal frame structure with vertical supports and wheels (no text or symbols)

Structural diagram of a metal frame with labeled points A, B, and C, showing support beams and a highlighted section (no text or symbols beyond labels)

Technical illustration showing mechanical components and a bracket assembly with labeled parts (A, B, C), no readable text or symbols present.

Exploded view of a mechanical bracket assembly with labeled D+D1 component (no text or symbols on parts)

Mechanical assembly diagram showing a wheel-mounted frame with mechanical components and a close-up of a hand adjusting a component (no text or symbols present)

elettronica www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

3D rendering of a metal frame structure with vertical supports and wheels (no text or symbols)

Structural frame diagram with labeled points A, B, and C, showing structural components without any text or symbols.

Technical illustration showing mechanical components and a bracket assembly (no text or symbols)

Exploded view of a mechanical bracket assembly with labeled D+D1 component (no text or symbols on parts)

Mechanical assembly diagram showing a wheel-mounted frame with mechanical components and a close-up of a hand adjusting a component (no text or symbols present)

INSTRUCCIONES DE MANTENIMIENTO DEL PRODUCTO

3D rendering of a metal frame structure with vertical supports and wheels (no text or symbols)

POTRZEBUJESZ POMOCY? SKONTAKTUJ SIE Z NAMI!

Structural diagram of a metal frame with labeled points A, B, and C, showing structural details without any text or symbols.

Technical illustration showing mechanical components and a bracket assembly (no text or symbols)

Exploded view of a mechanical bracket assembly with labeled D+D1 component (no text or symbols on parts)

Mechanical assembly diagram showing a wheel-mounted frame with mechanical components and a close-up of a hand adjusting a component (no text or symbols present)

INSTRUKCJA KONSERWACJI PRODUKTU

3D rendering of a metal frame structure with vertical supports and wheels (no text or symbols)

HULP NODIG? NEEM CONTACT MET ONS OP!

Structural frame diagram with labeled points A, B, and C, showing structural components without any text or symbols.

Technical illustration showing mechanical components and a bracket assembly (no text or symbols)

Exploded view of a mechanical bracket assembly with labeled D+D1 component (no text or symbols on parts)

Mechanical assembly diagram showing a wheel-mounted frame with mechanical components and a close-up of a hand adjusting a component (no text or symbols present)

PRODUCTONDERHOUDSINSTRUCTIES

garantiecertificaat www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

3D rendering of a metal frame structure with vertical supports and wheels (no text or symbols)

BEHÖVER HJÄLP? KONTAKTA OSS!

Structural diagram of a metal frame with labeled points A, B, and C, showing support beams and a highlighted section (no text or symbols beyond labels)

Technical illustration showing mechanical components and a bracket assembly (no text or symbols)

Exploded view of a mechanical bracket assembly with labeled D+D1 component (no text or symbols on parts)

Mechanical assembly diagram showing a wheel-mounted frame with mechanical components and a close-up of a hand adjusting a component (no text or symbols present)

UNDERHÅLLSINSTRUKTIONER FÖR PRODUKTEN

www.vevor.com/support