DX9930 - Display counter Vevor - Free user manual and instructions

Product type	Display counter for showroom or exhibition
Brand	Vevor
Model	DX9930
Product dimensions (L x W x H)	975 x 385 x 870 mm
Package dimensions (L x W x H)	1020 x 95 x 440 mm
Net weight	4.95 kg
Gross weight	6.3 kg
Main material	Metal frame with black tabletop
Color	Black
Package contents	Machine*1, Partition*1, Fabric*1, Carry bag*1
Assembly required	Yes, simple tool-free assembly (folding legs and placing partition and fabric)
Surface type	Rigid tabletop with textile covering (Velcro)
Recommended use	Indoor, on flat and stable floor
Estimated maximum load capacity	Approximately 50 kg (evenly distributed)
Care and cleaning	Clean with a soft, dry cloth. Avoid abrasive products.
Safety	Do not sit or stand on the counter. Keep out of reach of children.
Warranty	Technical support and electronic warranty certificate via www.vevor.com/support

Frequently Asked Questions - DX9930 Vevor

How to assemble the Vevor DX9930 counter?

Turn the machine over, open the four legs, and straighten the support bar. Stand it up, insert the partition, then attach the fabric using the provided Velcro. No tools are needed.

What is the maximum weight supported by the counter?

The instructions do not specify an exact load capacity. For safe use, we recommend not exceeding 50 kg evenly distributed.

Can I use this counter outdoors?

This counter is designed for indoor use only, on a flat and stable surface. Exposure to weather could damage the metal frame and covering.

How to clean the Vevor DX9930 counter?

Use a soft, dry cloth to wipe the surface. Avoid abrasive or liquid cleaners that could damage the textile covering.

Is the counter delivered with accessories?

Yes, the package contains the machine (counter), a partition, a fabric covering, and a carry bag for transport.

Can I sit on the counter?

No, it is strictly prohibited to sit or stand on the counter. This could cause serious injury and damage the unit.

What are the exact dimensions of the counter?

The product dimensions are 975 mm length, 385 mm depth, and 870 mm height.

How to get technical support or warranty?

Visit www.vevor.com/support for technical support and the electronic warranty certificate.

Is the counter easy to disassemble and store?

Yes, the legs fold and the partition and fabric can be easily removed. The counter can be stored flat in its original packaging.

What is the weight of the counter?

The net weight is approximately 4.95 kg and the gross weight (packaged) is approximately 6.3 kg.

USER MANUAL DX9930 Vevor

Technical Support and E-Warranty Certificate https://www.vevor.com/support

TRADE SHOW COUNTER USER MANUAL

MODEL NO.: DX9930

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent estimate of savings you might benefit from buying certain tools with us compared top brands and does not necessarily mean to cover all categories of tools offered are kindly reminded to verify carefully when you are placing an order with us actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

Trade Show Counter

MODEL NO.: DX9930

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of user manual. The appearance of the product shall be subject to product you received. Please forgive us that we won't inform your use, there are any technology or software updates on our product.

WARNING:

Please read this manual carefully before using the product. Failure to do so may result in serious injury. SAVE THIS MANUAL

ASSEMBLY PRECAUTIONS

1. Assemble only according to these instructions. Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Keep the assembly area clean and well-lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or under the influence of alcohol, drugs, or medication.
6. The product capabilities apply to properly and completely assembled products only.
7. Assemble on a flat, level, hard, and smooth surface capable of supporting the Trade Show Counter.
8. For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap and separate all parts in a clean work area.

USE PRECAUTIONS

TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:

1. DO NOT SIT OR STAND ON THIS ITEM.
2. This product is not a toy. Do not allow children to play with or near this item.
3. Do not exceed weight capacities. Please empty Platform Beds before moving.
4. Use only on a flat, level, hard and smooth surface capable of supporting a fully loaded Trade Show Counter.
5. Use as intended only.
6. Inspect before every use. Do not use it if parts are loose or damaged.

TECHNICAL SPECIFICATIONS

Model	DX9930
Product Dimensions(L*W*H)	975*385*870mm
Packing Size(L*W*H)	1020*95*440mm
Net Weight (kg)	4.95
Gross Weight (kg)	6.3

PACKAGE CONTENTS

ASSEMBLY STEPS

STEP 1

Machine: Flip to the back.

Open the four legs of the table, and straighten the support.

STEP 2

Machine: Stand up, place septum.

STEP 3

The cloth is attached to the entire machine with Velcro.

COMPLETION

Address: Shuangchenglu 803nong11hao1602A-1609shi, Baoshan District, Shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH.

Mainzer Landstr.69, 60329 Frankfurt am Main.

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

C/O YH Consulting Limited, Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

Address: Shuangchenglu 803nong11hao1602A-1609shi, Baoshan District, Shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET, EASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

Przedstawicie

UE

E-CrossStu GmbH.

Mainzer Landstr. 69, 60329 Frankfurt am Main.

C/O YH Consulting Limited, Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

Address: Shuangchenglu 803nong11hao1602A-1609shi, Baoshan District, Shanghai 200000 CN.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Imported in AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Imported in USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE