DM-F600 - Beer dispenser Vevor - Free user manual and instructions

Product Type	Beer Fermenter
Model	DM-F600
Brand	Vevor
Maximum Wort Capacity	30 liters
Included Accessories	Airlock (hydraulic seal), clamps, lid, thermometer, external beer valve, yeast valve, feet
Thermometer Function	Monitoring fermentation temperature
Valves	Opening and closing of wort and yeast
Cleaning and Sterilization	Sterilize before and after use with food-grade disinfectant or sterilization tablets
Material	Plastic (estimated)
Approximate Dimensions	Approximately 40 x 40 x 50 cm
Approximate Weight	2-3 kg
Installation	Place on a stable table, do not fill beyond 30 L
Maintenance	Clean with a soft cloth or non-metallic pad, use mild detergent, vinegar, or soda
Safety	Do not apply water or heavy objects before extending the feet; ensure there is no leakage
Repairability	Spare parts available via Vevor technical support
Warranty	Electronic warranty certificate available at www.vevor.com/support

Frequently Asked Questions - DM-F600 Vevor

What is the maximum capacity of the DM-F600 fermenter?

Do not fill the tank with more than 30 liters of wort to leave space for air bubbles.

How to sterilize the fermenter before use?

Use a food-grade disinfectant or soak the parts in water with sterilization tablets for 20 to 30 minutes.

How to install the thermometer?

Insert the thermometer into the hole, then secure the parts in order: silicone ring, flat washer, nut. Tighten with a wrench to prevent leaks.

How does the fermenter valve work?

The valve is used to open and close the passage of wort and yeast. Turn the valve to the 'Valve activated' position to open, and reverse to close.

Do I need to fill the airlock (hydraulic seal)?

Yes, after inserting the airlock into the lid, fill it with a little water to ensure hydraulic sealing.

What detergents can I use to clean the fermenter?

Use a dish detergent, vinegar, or baking soda. Avoid sharp metal tools; prefer a soft cloth or scrubbing pad.

Where should I place the fermenter during fermentation?

Place it on a stable table, in a dry place away from temperature variations.

How to check for leaks?

Before adding wort, fill the tank with water to the top and check that no leaks occur at the valves and thermometer.

Can I use the fermenter for other beverages besides beer?

The fermenter is designed for beer fermentation, but can be used for other fermented beverages like cider or wine, after sterilization.

Where to find spare parts and technical support?

Visit www.vevor.com/support for technical assistance and the electronic warranty certificate.

USER MANUAL DM-F600 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

FERMENTER

MODEL: DM-F600

We continue to be committed to providing you with tools at competitive prices. "Save Half", "Half Price", or any other similar expressions used by us only represent the savings you might benefit from buying certain tools with us compared to top brands, and do not necessarily mean to cover all categories of tools offered. We kindly remind you to verify carefully when placing an order with us whether you are actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

FERMENTER

MODEL: DM-F600

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves the right to interpret the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of any technology or software updates on our product.

Warning - To reduce the risk of injury, the user must read the instructions manual carefully.

Safety Instructions

Please read all the instructions carefully, and keep this manual for further reference.

- Do not apply water or heavy items before the extend feet are fully in place, as this could cause

water leakage due to pressure on the water outlet.

- Before installing the extend feet, remember not to apply water or place items to

avoid the water outlet being under pressure, which could cause leakage.

- The airlock should be turned on after applying an amount of water.

What's In The Box

1. Airlock

2. Clamps

3. Lid

4. Thermometer

5. Beer outer valve

6. Yeast Valve

7. Feet

Parts

Operation

Thermometer Operation

Insert the thermomete into the hole	Fix the parts in sequence (Silicone ring+flat washer+nut)	Finished

Valve Operation

This valve serves to open and close the wort and yeast.

Note: please make sure the thermometer is aligned and tightened with a tool (such as a wrench). Otherwise, leakage may occur during fermentation.

FERMENTATION

Preparation

1. Before fermentation, it is essential to sterilize the fermenter as well as accessories. You can clean the fermenter with a food-grade disinfectant, or soak the fermenter in water with sterilization tablets for 20-30 minutes.
2. Please fill the tank up to the top with water and make sure that there are no leaks before adding the wort.
3. Do not fill the tank with more than 30 liters of wort. Make sure there is enough

room to blow off the air bubbles.

1. Insert the water seal into the lid as shown and fill with a little water.

water seal.

1. Secure the lid with clamps.
2. Place the fermentation vessel on a stable table.

After fermentation

1. Clean and sterilize the fermenter and accessories (including the valve) after use.
2. Do not use sharp metal tools to remove debris. Use a soft cloth or scouring pad to clean the inside of the kettle.
3. Suitable detergents can be used, such as dishwashing detergent, vinegar, or soda.
4. Store the fermentation vessel in a dry place.
5. Make sure the tank and all accessories are clean and sterilized before next use.

Manufacturer: Shanghai Muxin Muye Youxian Gongsi

Address: Baoshan District, Shuangcheng Road 803, Lane 11, Room 1602A-1609, Shanghai

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET, EASTWOOD NSW 2122, Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

Pooledas Group Ltd

Unit 5 Albert Edward House,

The Pavilions Preston, United Kingdom

[e-mail]

01772418127

EC

REP

SHUNSHUN GmbH

Römeräcker 9 Z2021, 76351

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

NEED HELP? CONTACT US!

Valve ON Valve OFF

Valve ON

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

Valve inserted

Valve inserted Valve off

Imported into AUS: SIHAO PTY LTD. 1 ROKEVA STREET, EASTWOOD NSW 2122, Australia

Anaheim Place, Rancho Cucamonga, CA 91730

REP. DEL

REGNO UNITO

Pooledas Group Ltd

Electronics www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

Valve ON Valve OFF

Valve ON

PTY LTD. 1 ROKEVA STREET, EASTWOOD NSW 2122, Australia

Imported into USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical support and e-warranty certificate www.vevor.com/support

FERMEERDER

MODEL: DM-F600

HULP NODIG? NEEM CONTACT MET ONS OP!

1. Luchtsluis
2. Klemmen
3. Deksel
4. Thermometer
5. Buitenventiel bier
6. Gistklep
7. Voeten

Onderdelen

Operatie

Thermometerbediening

garantiecertificaat www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

1. Air lock

1. Clamps
2. Lid

4. Thermometer

5. Outer vent

6. Fermentation lock

7. Feet

Parts

Operation

Thermometer operation

Sätt i termometern in i hålet	Fixa in delarna sekvens (Silikonring+plattbricka+mutter)	Färdiga

Valve operation

www.vevor.com/support