P4048 - Beer dispenser Vevor - Free user manual and instructions

Product type	Beer dispenser / Brewing kettle
Brand	Vevor
Model	P4048
Nominal capacity	40 liters
Main material	304 stainless steel
Dimensions (diameter x height)	Approximately 40 cm x 45 cm
Net weight	Approximately 9 kg
Power supply	Non-electric (compatible with gas or induction)
Temperature range	0-100 °C (built-in thermometer)
Tap type	Ball valve tap with spout
Included accessories	False bottom, bazooka filter, thermometer, gasket, screw, key, sealing tape
Main function	Beer brewing (mashing, filtration, boiling)
Maintenance and cleaning	Manual cleaning with hot water and mild detergent; dry completely before storage
Safety	Use gloves; do not exceed capacity; check handle before use
Warranty	Electronic warranty via www.vevor.com/support

Frequently Asked Questions - P4048 Vevor

How to install the tap on the kettle?

Follow the diagram in the manual: place the rubber gasket, the flat gasket, then the tap through the wall, and tighten with the nut using the provided mini wrench. Use sealing tape on the threads.

Can I use this dispenser on an induction hob?

Yes, the stainless steel bottom is induction-compatible, provided the hob has a surface suitable for the size of the kettle.

What is the recommended maximum liquid capacity?

Do not exceed 40 liters to avoid overflow and tipping risks. Fill to a maximum of 3/4 of the height.

How to clean the bazooka filter after use?

Disassemble the filter and rinse it with clear water. Use a soft brush to remove residues. Let it dry completely before reassembling.

What to do if the thermometer shows an incorrect temperature?

Check that the probe is in contact with the liquid. If the problem persists, contact Vevor support for a replacement under warranty.

Is the false bottom mandatory for brewing?

Yes, the false bottom retains the grains and ensures efficient filtration. It is included and must be installed before mashing.

How to avoid burns during use?

Always wear heat-resistant gloves. Use the handle to lift the kettle and do not touch hot surfaces.

Can I brew other beverages besides beer?

Yes, this kettle is suitable for making wine, cider, or even stocks. Be sure to clean thoroughly after each use to avoid contamination.

How to maintain the sealing gaskets?

After each use, remove the gaskets and clean them with soapy water. Dry them and store them away from light to prevent aging.

Where to find spare parts?

Spare parts (gaskets, thermometer, tap) are available on the Vevor website. Contact technical support via www.vevor.com/support to order.

USER MANUAL P4048 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

BREWING KETTLE

MODEL: P4048, P2829, P2830

We continue to be committed to providing you with tools at competitive prices. "Save Half", "Half Price", or any other similar expressions used by us only represent the savings you might benefit from buying certain tools with us compared to top brands and does not necessarily mean to cover all categories of tools offered. We kindly remind you to verify carefully when placing an order with us that you are actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

BREWING KETTLE

MODEL: P4048, P2829, P2830 (without False Bottom and Bazooka Filter)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of any technology or software updates on our product.

Safety Instruction

Read and understand this entire manual before operating and servicing this product. Failure to follow these warnings and instructions can cause death, personal injury, or damage to valuable property.

WARNING: TO PREVENT SERIOUS INJURY FROM TIPPING:

1. This product is not a toy. Do not allow children to play with this
2. Use as intended only. Do not stand on the product.
3. Make sure the handle is not loose before each use.
4. Do not exceed the listed weight capacity.
5. Please wear gloves when using to prevent burns

Installation instructions:

Imported to USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

www.vevor.com/support

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

NEED HELP? CONTACT US!

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

electronics www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

NEED HELP? CONTACT US!

www.vevor.com/support

US Import: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical support and e-warranty certificate www.vevor.com/support

BREW KETTLE

MODEL: P4048, P2829, P2830

NEED HELP? CONTACT US!

NEED HELP? CONTACT US!

Imported in the USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!