MBL-H-10A - Beer dispenser Vevor - Free user manual and instructions
Find the device manual for free MBL-H-10A Vevor in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Beer dispenser (pressure beer dispenser) |
| Brand | Vevor |
| Model | MBL-H-10A |
| Dimensions (L x H x D) | 42 x 38 x 32 cm |
| Weight | 6.8 kg |
| Power supply | 220-240 V, 50 Hz |
| Cooling power | 60 W |
| Serving temperature | 4 °C to 10 °C |
| Keg compatibility | 5 L kegs (pressure type) |
| CO2 gas | 16 g CO2 cartridge or external bottle |
| Output pressure | 10-15 PSI |
| Material | Stainless steel and ABS plastic |
| Main functions | Electric cooling, beer dispensing, pressure regulation |
| Maintenance and cleaning | Clean the lines with hot soapy water after each use |
| Safety | Overheat protection and automatic shutdown in case of excessive temperature |
| Spare parts and repairability | Seals, regulators, and taps available separately |
| General information | Delivered with keg support, dispensing hose, and user manual |
Frequently Asked Questions - MBL-H-10A Vevor
How do I install my Vevor MBL-H-10A beer dispenser?
Place the device on a stable surface, connect the dispensing hose, insert the 5 L keg, connect the CO2 cartridge, then set the recommended pressure to 12 PSI. Let it cool for 24 hours before first use.
What is the ideal temperature for serving beer?
The serving temperature should be between 4 °C and 8 °C. Lower the temperature if the foam is too abundant, or raise it if the beer is flat.
How do I clean the dispenser lines?
Disassemble the tap and fittings. Circulate warm water with a food-grade cleaning product, then rinse with clean water. Disinfect once a month with a suitable solution.
Why does the beer foam too much?
Common causes are: too high CO2 pressure, beer too warm, or an unrinsed glass. Reduce the pressure to 10-12 PSI, wait until the beer is well chilled and serve in a tilted glass.
Which CO2 cartridge should I use for this model?
Use 16 gram CO2 cartridges. One cartridge dispenses about 10 liters of beer, depending on the pressure selected.
What should I do if the beer does not flow?
Check that the CO2 cartridge is not empty, that the keg is properly pierced, and that the regulator is open. Purge the air from the lines by dispensing a small amount of beer.
Can I use a 10-liter keg?
This model is designed for 5 liter kegs. Using a larger format requires a raised support and may affect cooling. It is best to respect the indicated capacity.
How do I adjust the CO2 pressure?
Turn the regulator knob. The ideal pressure is between 10 and 15 PSI. Increase if the flow is too slow, decrease if foam is excessive.
Can the device operate continuously?
Yes, the compressor operates in cycles with a thermostat. It maintains the temperature automatically and consumes little energy in standby.
What accessories are included with the dispenser?
The kit includes a beer cooler, a dispensing tap, a hose, a regulator, a keg stand, and an instruction manual. Some models also include trial CO2 cartridges.
User questions about MBL-H-10A Vevor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Beer dispenser in PDF format for free! Find your manual MBL-H-10A - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MBL-H-10A by Vevor.
USER MANUAL MBL-H-10A Vevor
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vevor
Model : MBL-H-10A
Category : Beer dispenser