DT-C1104 - Chafing dish Vevor - Free user manual and instructions
Find the device manual for free DT-C1104 Vevor in PDF.
User questions about DT-C1104 Vevor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Chafing dish in PDF format for free! Find your manual DT-C1104 - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DT-C1104 by Vevor.
USER MANUAL DT-C1104 Vevor
EASTWOOD NSW 2122 Australia
Import do USA: Sanven Technology Ltd., Suite 250, 9166
Anaheim Place, Rancho Cucamonga, CA 91730
PooledasGroupLtd
Jednostka 5 Albert Edward House, The Pavilions Preston,
9166Anaheim Place, Rancho Cucamonga, CA 91730
PooledasGroupLtd
Einheit 5 Albert Edward House, The Pavilions Preston,
Großbritannien
SHUNSHUN GmbH
www.vevor.com/support
EASTWOOD NSW 2122 Australia
9166Anaheim Place, Rancho Cucamonga, CA 91730
Groupe Pooledas Ltd
Unité 5 Albert Edward House, The Pavilions Preston,
Royaume-Uni
SHUNSHUN GmbH
HULP NODIG? NEEM CONTACT MET ONS OP!
STREET-EASTWOOD NSW 2122 Australie
9166Anaheim Place, Rancho Cucamonga, CA 91730
PooledasGroupLtd
Eenheid 5 Albert Edward House, The Pavilions Preston,
Verenigd Koninkrijk
SHUNSHUN GmbH
Anaheim Place, Rancho Cucamonga, CA 91730
PooledasGroupLtd
Enhet 5 Albert Edward House, The Pavilions Preston, Storbritannien
SHUNSHUN GmbH
Importado a AUS: SIHAO PTY LTD, 1 ROKEVA STREET-EASTWOOD NSW 2122 Australia
9166Anaheim Place, Rancho Cucamonga, CA 91730
Grupo Pooledas Ltd
Unidad 5 Casa Albert Edward, The Pavilions Preston,
Reino Unido
SHUNSHUN GmbH
www.vevor.com/support
Importato in AUS: SIHAO PTY LTD, 1 ROKEVA STREET
EASTWOOD NSW 2122 Australia
9166Anaheim Place, Rancho Cucamonga, CA 91730
Gruppo Pooledas Ltd
Technical Support and E-Warranty Certificate www.vevor.com/support
RECTANGLE CHAFING DISH DT-C1104
We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.
VEVOR
TOUGH TOOLS, HALF PRICE
RECTANGLE CHAFING DISH
MODEL NO.:DT-C1104
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact us:
Technical Support and E-Warranty Certificate www.vevor.com/support
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
IMPORTANT SAFEGUARDS
- Children and minors cannot use this product.
- Only solid fuel can be used as heating fuel. Do not use gasoline, alcohol, etc.
- Please use the ignition torch to ignite the fuel.
- When the fuel is burning, special personnel shall be assigned to watch over it to prevent it from being hit or toppled.
- Close the metal cover of the container to extinguish the fuel. Do not blow it out.
- It is not allowed to add new fuel before the burning fuel is extinguished and cooled.
- Remember to clean the food tray and fuel container after each use.
- Do not clean with corrosive solvents such as strong acid and alkali
Thank you for using this product. In order to make sure that you can operate the machine correctly, read this instruction carefully before operation and keep it properly for future reference. Please be sure to read the precautions and safety rules listed above to ensure your safe use.
PRODUCT COMPONENTS
-
Lid
-
Food Pan
-
Water Pan
-
Frame
-
Fuel Holder
OPERATING INSTRUCTIONS
Before using the product for the first time, peel off any promotional materials and packaging materials, and check that the food pan and water pan are clean and free of dust. If necessary, wipe them over with a damp cloth. Spread over with an absorbent kitchen towel and wipe off any excess oil.
- Take all the components out of the box and unwrap.
- Place the frame on a firm surface (see diagram for included parts).
- Place the fuel holder at the center of the base carefully.
- Put the water pan into the frame and fill with water (fill in hot water for faster heating).
- Remove the cover from the fuel holder, and ignite the fuel to heat the water (steam from the heated water will keep the food hot).
- Place food in the food pan and set this pan into the water pan. The food pan will be suspended above the water. Then, place the cover over the food pan.
- Replace the cover over the fuel holder to extinguish the burning fuelr—DO NOT BLOW IT OUT.
NOTE:
- Always use a scald-proof pad when touching the fuel holder. Fuel, fuel holder and its cover can get extremely hot.
- For the best heating efficiency, please keep the lid closed when heating, and check the water level periodically, since the hot water will evaporate into steam.
CLEANING AND MAINTENANCE
- The frame and cover may be cleaned with warm, soapy water. Never use abrasive materials or scouring pads. Thoroughly wipe off the mild soap instead of immersing the frame into water. If needed, you can polish it with stainless steel cleaner or glass cleaner without ammonia.
- Parts that can be cleaned in a commercial dishwasher: Food Pan and Water Pan.
Address: Baoshanqu Shuangchenglu 803long 11hao
1602A-1609shi Shanghai
Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREET
EASTWOOD NSW 2122 Australia
Imported to USA: Sanven Technology Ltd., Suite 250, 9166
Anaheim Place, Rancho Cucamonga, CA 91730
PooledasGroupLtd
Unit 5 Albert Edward House, The Pavilions Preston, United Kingdom
SHUNSHUN GmbH
Technical Support and E-Warranty Certificate
www.vevor.com/support
