B144-3 - Clothing Vevor - Free user manual and instructions

Product Type	Silicone Body
Brand	Vevor
Model	B144-3
Main Material	Silicone
Recommended Use	Costume, body simulation, cosplay
Color	Flesh tone (real skin simulation)
Size	One size adult (standard size)
Realism Level	Very realistic, reproduced skin texture
Elasticity	High elasticity, high rebound capacity
Tear Resistance	Tensile resistant, does not crack
Wear Resistance	Good resistance, long lifespan
Non-toxic	Yes, no side effects
Odor	Odorless, tasteless
Temperature Resistance	Resistant to cold and heat
Surface	Dry, oil-free, does not yellow
Maintenance	Clean with water or mild detergent
Usage Precautions	Wear gloves, apply talc before each use
Storage	Ventilated dry place, avoid humidity, grease and direct sunlight
Safety	Not suitable for children under 3 years
Included Accessories	None (body only)
Warranty	Electronic warranty certificate provided
Country of Origin	China
Repairability	Not repairable, no spare parts

Frequently Asked Questions - B144-3 Vevor

How to put on the silicone body?

First apply talc to the area to be worn and put on gloves. Follow the steps in the manual: start with the legs, then gradually pull up. Avoid pulling abruptly.

Is the body safe for skin?

Yes, it is made of non-toxic silicone, odorless and with no side effects. However, it is recommended to wear gloves and apply talc to avoid irritation and nail marks.

How to clean this silicone garment?

Clean it with clear water or a mild detergent. Avoid harsh solvents. After cleaning, dry it in a ventilated place, away from sunlight.

Is the product suitable for children?

No, it is not recommended for children under 3 years. It contains small parts and may pose a choking hazard.

Can I wear this silicone body for daily use?

It is designed for occasional use (costume, simulation). Prolonged wearing may be uncomfortable. Follow the usage precautions.

Does the silicone body leave marks on clothes?

If the surface is dry and oil-free, it should not discolor. Test on a hidden area first before wearing with light-colored clothes.

What to do if the body tears?

Silicone is resistant but can tear under sharp objects. Avoid contact with scissors, knives, etc. If torn, the product is not repairable.

How to store the body when not in use?

Store it in a dry place, away from heat and humidity. Do not expose to direct sunlight. Ideally, store flat in a cloth bag.

Is the body reusable?

Yes, it is designed for repeated use. With proper care, it retains its shape and elasticity. Apply talc before each use.

Where can I find the instruction manual?

The manual is available for free download on notice-facile.com. You can also contact Vevor technical support via www.vevor.com/support.

USER MANUAL B144-3 Vevor

SILICONE BODYSUIT

MODEL: B144-3

We continue to be committed to providing you with tools that offer competitiveness. Expressions such as "Save Half", "Half Price", or any other similar expressions used represent an estimate of savings you might benefit from when buying tools from us compared to major top brands, and do not mean to cover all categories of tools offered by us. You are reminded to verify carefully when placing an order with us that you are actually saving half in comparison with the top major brands.

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us: Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves the right to interpret our user manual. The application of the product shall be subject to the product you received. Please forgive us and we will inform you again if there are any technology or software updates on our products.

WEAR STEPS

Note: Before wearing, please apply talcum powder and wear gloves in the wearing area to prevent the nails from being scratched or leaving marks that affect the wearing effect.

STEP1 STEP2 STEP3 STEP4

STEP5 STEP6 STEP7 STEP8

PRECAUTIONS

1. Please wear gloves before wearing to prevent nails from scratching the product or leaving nail marks that affect the wearing effect.
2. During use, prevent damage to sharp objects on the product. For example, scissors, knives, needles, and other sharp objects. If scratched, they will shorten or directly damage the product, thus affecting use.
3. When cleaning with clean water or neutral detergent, please remove the product accessories such as high resilience foam, rope, elastic belt, and nipple part. Cleaning should avoid scratching and decolorization.
4. Please make sure that the clothes do not fade before wearing them, so as not to affect the color of the product.
5. The product is not easy to store in damp, greasy, high temperature places, or in direct sunlight. Store in a ventilated and dry place.

WARNING: Not for children under 3 years. Put on gloves and apply talcum powder evenly to the wearing area before each wear. Prevent sharp objects from damaging the product.

CHARACTERISTICS

This product is developed and produced by our own factory. It has a simulated appearance, strong tensile resistance, wear resistance, non-toxic and no side effects. The mold imitates the shape of the human body and has a scientific

thin-edge design. After wearing, it is very realistic, soft and elastic, comparable to real skin.

Safe, non-toxic, tasteless, and does not turn yellow. ■ Simulation, soft, high elasticity, with high rebound ability, long-term wear without deformation. Non-cracking, long service life, no pressure for repeated use, cold and high temperature resistance, and the surface is dry and oil-free. - The thin edge design is an excellent fit to the body without leaving traces. Reproduces the texture of real-life skin.

Manufacturer: Henan Hansong Silicon Products Co., Ltd

Address: Chuangye Avenue Industrial Science and Technology Park, Yanling County, Xuchang City, Henan Province, China.

Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREET EASTWOOD NSW 2 Australia

Imported to USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

Manufacturer: Henan Hansong Silicon Products Co., Ltd

C/O YH Consulting Limited Bureau 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

C/O YH Consulting Limited Office 147, Centurion House,

London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

Address: Chuangye Avenue Industrial Science and Technology Park, Yanling

Imported into AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122

Australia

Imported into USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho

Cucamonga, CA 91730

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main.

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House,

Via Roma, 101, 00186 Rome, Italy

VEVOR

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

STEP 7 STEP 8 STEP 6 STEP 5

PRECAUTIONS

C/O YH Consulting Limited Office 147, Centurion House,

London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR

TOUGH TOOLS, HALF PRICE

Technical support and electronic warranty certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Manufacturer: Henan Hansong Silicon Products Co., Ltd

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

Address: Chuangye Avenue Industrial Science and Technology Park, Yanling

County, Xuchang City, Henan Province, China.

Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREET EASTWOOD NSW 2122

Australia

Imported to USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho

Cucamonga, CA 91730

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main.

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House,

London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical support and e-warranty certificate www.vevor.com/support

SILICONE BODYSUIT

MODELbyB144-3

NEED HELP? CONTACT US!

www.vevor.com/support

Address: Chuangye Avenue Industrial Science and Technology Park, Yanling

County, Xuchang City, Henan Province, China.

Imported by AUS: SIHAO PTY LTD, 1 ROKEVA STREET EASTWOOD NSW 2122

Australia

C/O YH Consulting Limited, Office 147, Centurion House,

London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support