BBZ-3601 - Bed rail Vevor - Free user manual and instructions

USER MANUAL BBZ-3601 Vevor

Affordable. Reliable. Home Improvement.

KIDS BED RAILS

MODEL:BBZ-3601

MODEL:BBZ-3601

Line drawing of a simple mechanical or architectural component with a flat top and curved base (no text or symbols)

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product y received. Please forgive us that we won't inform you again if there are a technology or software updates on our product.

Warning-To reduce the risk of injury, user must read instructions manual carefully.

WARNING

1. This product is suitable for children aged 6 months to 24 months.
2. The bed guardrail can only be used safely when the lifting system is locked.
3. This product is only for prevention and protection, and cannot replace adult supervision. Infants under 2 years old should be under the full supervision of their parents during the use of this product to avoid fatal danger.
4. Do not leave children unattended while playing in the bed guardrail.
5. Do not leave anything that could be used as a foothold or cause suffocation or strangulation in the bed guardrail.
6. Do not disassemble, move, or alter any structure or parts of the be rail.
7. The cover can be washed with warm water and air dried naturally.
8. please regularly clean the bed rail to ensure a clean environment for y baby's healthy growth.

The guardrail effectively protects against height growth and Suitable bed and mattress sizes

Name	Dimensions	Suitable bed and mattress sizes	Mattress thickness
BBZ-3601	800*400 mm	All	50-300mm

INSTRUCTIONS

Step1.

1.1. Flip down the support rods first.
1.2. Push the support rods forward after flipping down, and hear a click on both sides to ensure the rods are locked in place.
1.3.Finally,unfold both sides of the bed guardrail and fully extend it.

Diagram illustrating a mechanical assembly process with numbered steps and a separate view of the device's internal structure.

Step2.

2.1.Lift the mattress and place it on the support rods of the portable bed guardrail.
2.2.Under the front of the bed guardrail, find the lifting button on both sides, adjust the bottom edge of the bed guardrail to be at the appropriate height with no gap between it and the mattress surface.

Technical diagram showing a bed with structural components and an inset close-up of a mechanical assembly with labeled parts ① and ②.

Step3.

The steps for storage are opposite to the steps for unfolding.

Simple line drawing of a two-panel device with directional arrows indicating rotation (no text or symbols)

3.1. Lift one side of the guardrail with both hands and fold it inward .

Diagram of a device with two panels and a base, showing directional arrows indicating movement or force (no text or symbols)

3.2. press down on the base spring and pull out the pipe fittings.

Technical line drawing of a dual-panel mechanical device with curved brackets (no text or symbols)

3.3. Lift the bottom support feet upward to fold it up.

Accessory Kits

Shaped Drive x 3 (25mm)

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

Affordable. Reliable. Home Improvement.

BARRIÈRES DE LIT POUÉNFANTS

MODÈLE : BBZ-3601

MODÈLE : BBZ-3601

Line drawing of a mechanical bracket or frame structure with no text or symbols

Diagram illustrating a mechanical assembly process with numbered steps and a separate view of the device's internal structure.

Étape 2.

Technical diagram showing a bed with structural components and an inset close-up of a mechanical assembly with labeled parts ① and ②.

Étape 3.

Diagram of a mechanical device with two panels and rotating arrows, no text or symbols present

Diagram of a laptop with two panels and a base, showing directional arrows indicating movement (no text or symbols)

Technical line drawing of a dual-panel mechanical device with curved supports (no text or symbols)

YH CONSULTING LIMITED. A/S YH Consulting Limited, bureau 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

REPRÉSENTANT DE LA CE

E-CrossStu GmbH Mainzer Landstr.69, 60329 Francfort-sur-le-Main.

VEVOR

Affordable. Reliable. Home Improvement.

Kinderbettgitter

MODELL: BBZ-3601

MODELL: BBZ-3601

Line drawing of a mechanical bracket or frame structure with no text or symbols

Diagram illustrating a mechanical assembly process with numbered steps and a separate view of the device's internal structure.

Schritt 2.

Technical diagram showing a bed with structural components and an inset close-up of the mechanical assembly with labeled parts ① and ②.

Schritt 3.

Simple line drawing of a two-panel cabinet with directional arrows indicating rotation (no text or symbols)

Diagram of a device with two panels and directional arrows indicating movement or force (no text or symbols)

Technical line drawing of a dual-panel mechanical frame structure (no text or symbols)

YH CONSULTING LIMITED. C/O YH Consulting Limited, Büro 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

EG-Vertreter

Affordable. Reliable. Home Improvement.

SPONDE PER LETTO PER BAMBINI

MODELLO: BBZ-3601

MODELLO: BBZ-3601

Line drawing of a mechanical bracket or frame structure with no text or symbols

Diagram illustrating a mechanical assembly process with numbered steps and a separate view of the device's internal structure.

Fase 2.

Technical line drawing of a mechanical assembly with an inset showing internal components (no text or symbols)

Fase 3.

Diagram of a two-panel device with bidirectional arrows indicating rotation, mounted on a base (no text or symbols)

Diagram of a device with two panels and directional arrows indicating movement or force (no text or symbols)

Technical line drawing of a dual-panel storage unit with curved metal brackets (no text or symbols)

Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Importato negli USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA91730

RAPPRESENTANTE DEL REGNO UNITO

YH CONSULTING LIMITED. C/O YH Consulting Limited Ufficio 147, Centurion House, London Road, Staines- upon-Thames, Surrey, TW18 4AX

Affordable. Reliable. Home Improvement.

Line drawing of a mechanical bracket or frame structure with no text or symbols

Diagram illustrating a mechanical assembly process with numbered steps and a separate view of the device's internal structure.

Paso 2.

Technical diagram showing a bed with structural components and an inset close-up of the mechanical assembly with labeled parts ① and ②.

Paso 3.

Diagram of a mechanical device with two panels and rotating arrows, no text or symbols present

Diagram of a laptop with two panels and a curved base, showing directional arrows indicating movement (no text or symbols)

Technical line drawing of a dual-panel mechanical structure with curved supports (no text or symbols)

YH CONSULTING LIMITADA. A/C YH Consulting Limited Oficina 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Affordable. Reliable. Home Improvement.

BARIERKI DO ŁÓŻEK DZIECIĘCYCH

MODEL:BBZ-3601

MODEL:BBZ-3601

Line drawing of a mechanical bracket or frame structure with no text or symbols

Diagram illustrating a mechanical assembly process with numbered steps and a separate view of the device's internal structure.

Krok 2.

Technical diagram showing a bed with structural components and an inset close-up of a mechanical assembly with labeled parts ① and ②.

Krok 3.

Diagram of a mechanical device with two panels and rotating arrows, no text or symbols present

3.1. Podnieś jedną

Diagram of a laptop with two panels and a curved base, showing directional arrows indicating movement (no text or symbols)

Technical line drawing of a dual-panel mechanical structure with curved supports (no text or symbols)

3.3. Podnieśspód

YH CONSULTING LIMITED. C/O YH Consulting Limited Biuro 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Przedstawiciel WE

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt nad Menem.

VEVOR

Affordable. Reliable. Home Improvement.

KINDERBED RAILS

MODEL:BBZ-3601

MODEL:BBZ-3601

Line drawing of a mechanical bracket or frame structure with no text or symbols

Diagram illustrating a mechanical assembly process with numbered steps and a separate view of the device's internal structure.

Stap 2.

Technical line drawing of a bed with an inset showing mechanical assembly (no text or symbols)

Stap 3.

Diagram of a mechanical device with two panels and rotating arrows, no text or symbols present

Diagram of a laptop with two panels and a curved base, showing directional arrows indicating movement or orientation (no text or symbols present)

Technical line drawing of a dual-panel metal frame structure with curved supports (no text or symbols)

3.3. Til de onderkamp

YH CONSULTING LIMITED. T.a.v. YH Consulting Limited Kantoor 147, Centurion House, London Road, Staines- upon-Thames, Surrey, TW18 4AX

EC

REP

Affordable. Reliable. Home Improvement.

SÄNGRÄNGER FÖR BARN

MODELL: BBZ-3601

MODELL: BBZ-3601

Line drawing of a flat-panel electronic device with metal brackets and connectors (no text or symbols)

Diagram illustrating a mechanical assembly process with numbered steps and a separate view of the device's internal structure.

Steg 2.

Technical diagram showing a bed with structural components and an inset close-up of the mechanical assembly with labeled parts ① and ②.

Steg 3.

Diagram of a two-panel device with bidirectional arrows indicating rotation, mounted on a base (no text or symbols)

Diagram of a device with two panels and directional arrows indicating movement or force (no text or symbols)

Technical line drawing of a dual-panel mechanical frame structure (no text or symbols)

YH CONSULTING LIMITED. C/O YH Consulting Limited Kontor 147, Centurion House, London Road, Staines- upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.