BT-30S - Food insulated container Vevor - Free user manual and instructions

Product Type	Insulated Soup Carrier
Brand	Vevor
Model	BT-30S
Estimated Capacity	30 Liters
Exterior Material	Double-walled, seamless polyethylene
Insulation	High-density polyurethane
Door	Removable, with nylon wide-strap lock
Handles	Ergonomic, cart-friendly
Main Functions	Keeps food hot or cold during transport
Recommended Use	Restaurants, caterers, delivery services
Maintenance	Clean with a soft cloth and soapy water; do not use abrasive products
Safety	Do not sit or stand on the device; use on a flat surface
Spare Parts	Door and seal available (contact customer service)
Warranty	Electronic warranty certificate available at vevor.com/support
Country of Origin	China

Frequently Asked Questions - BT-30S Vevor

How to clean the BT-30S insulated container?

Clean the inside and outside with a soft cloth soaked in soapy water. Rinse with clean water and dry. Avoid abrasive products or rough sponges to prevent scratching the surface.

Can the BT-30S be used for cold food?

Yes, the polyurethane insulation holds both heat and cold. You can use it to transport cold dishes, chilled drinks, or ice.

What is the capacity of the BT-30S?

The BT-30S model has a capacity of approximately 30 liters, ideal for transporting soups, saucy dishes, or drinks in large quantities.

Is the container suitable for gastronorm trays?

Yes, it accepts standard 1/1, 1/2, and 1/3 trays. For metal trays, make sure to wrap them to avoid scratching the inner wall.

How to open the door of the BT-30S?

The door locks with a wide nylon strap. To open it, unlock the strap and pull the handle. The door is removable for easy cleaning.

Does the BT-30S come with casters?

The BT-30S model does not have integrated casters. It is designed to be carried using its ergonomic handles or placed on a cart.

Can the BT-30S be used for hot food without preheating?

It is recommended to preheat the container with hot water before placing hot food to optimize heat retention. Similarly, you can pre-cool it for cold food.

Is the device under warranty?

Yes, Vevor offers an electronic warranty. To activate it or get technical support, go to vevor.com/support with your model number BT-30S.

What safety precautions should I follow?

Never sit on the container. Use it only on a flat and stable surface. Empty it before moving. Keep children away.

Is the door seal replaceable?

Yes, the door seal can be replaced. Contact Vevor customer service via the website to order the appropriate spare parts for the BT-30S.

USER MANUAL BT-30S Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

Product Description

MODEL: BW-90S/BW-90D/BW-120/ZF-30/BT-30S/EP-90L

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent estimate of savings you might benefit from buying certain tools with us compared to top brands and does not necessarily mean to cover all categories of tools offered. We kindly remind you to verify carefully when placing an order with us to ensure you are actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

Insulated Food Carriers

Name: Insulated Food Carriers

Model: BW-90S

Model: BW-90D

Model: BW-120

Name: Insulated Food Carriers

Model: ZF-30

Name: Insulated Soup Carrier, Name: Insulated Food Carriers

Model: BT-30S

Model: EP-90L

★ The picture is for reference only, please refer to the actual product.

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you if there are any technology or software updates on our product.

Warning - To reduce the risk of injury, user must read the instructions manual carefully.

PRODUCT DESCRIPTION

A Incubator

1. Kimball insulation equipment can keep the temperature of hot and cold food during transportation.
2. Solid, integrated, seamless double-wall polyethylene exterior is easy to clean and does not dent, crack, rust, lose shape, or damage.
3. The print-free nylon caster construction is rugged and durable, providing smooth shipping of a full incubator for use between kitchen meal locations.
4. Ergonomic handles are installed at the safety height of low and high equipment, making handling operation very convenient.
5. Wide nylon locks the door securely and form a seal to keep safe of hot food temperature.
6. The exterior of the incubator is kept cool during the operation.

Polyurethane insulation can maintain the temperature of hot and cold food during transportation when the equipment is plugged in.

B Insulation Barrels

1. The open-cover food insulation bucket is the best insulation equipment for transporting food products. It can be used to store, transport, and supply food to restaurants, buildings, suburbs, or catering service centers.
2. Tough and durable seamless polyethylene or structural thick foam insulation. Excellent insulation performance, with optimal temperature for heat storage or refrigeration.

MATTERS NEED ATTENTION

1. If metal plates are used, cool them to 95°C before placing them on the slide rail. It can be applied to 1/1, 1/2, 1/3, and other international standard-size plates.
2. If metal plates are used, it is recommended to choose a good quality plate that is wrapped or rolled. Otherwise, in long-term use, it may scratch the inner wall of the incubator and could cause injury to employees.
3. Built-in air holes can balance the pressure and release steam. (Figure 1)
4. The door is removable and easy to clean.
5. When handling vehicles, please use handling tools for loading and unloading in an orderly manner. Avoid improper operation that could cause artificial damage; otherwise, the consequences are your responsibility.
6. When the loading capacity of food in the incubator is saturated, please open the air vent on the box door and the bucket cover to prevent excessive expansion of the air from causing the deformation of the buckle.

Figure 1

TYPE SPECIFICATION

Model	Color	Capacity (L)	Outer Dimension (mm)	Accessories
BW-90S	Black	90	L645*W445*H610	/
BW-90D	Blue	90	L625*W447*H755	4"Directional wheel*2PCS; 4"Omni-directional wheel*2PCS; 8*20mm screw*16PCS; Shim*16PCS; Anti-slip gasket*16PCS;
BW-120	Black	120	L625*W445*H790	4"Directional wheel*2PCS; 4"Omni-directional wheel*2PCS; 8*20mm screw*16PCS; Shim*16PCS; Anti-slip gasket*16PCS;
ZF-30	Black	30	L627*W430*H310	/
BT-30S	Black	30	L435*W435*H540	/
EP-90L	Black	90	L640*W435*H600	/

SCHEMATIC DIAGRAM OF THE INCUBATOR LOADING TRA

★ The picture is for reference only, please refer to the actual product.

WARNING:

Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL

Assembly precautions:

1. Assemble only according to these instructions. Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Keep assembly area clean and well lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or when under the influence of alcohol, drugs, or medication.
6. Product capabilities apply to properly and completely assembled product only.
7. Assemble on a flat, level, hard and smooth surface capable of safely supporting a fully loaded insulated food case.

USE PRECAUTIONS:

TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:

1. DO NOT SIT, STAND ON THIS ITEM.
2. This product is not a toy nor a toy case. Do not allow children near this item.
3. Empty, close the insulated food case before moving.
4. Use only on a flat, level, hard and smooth surface capable of safely supporting a fully loaded insulated food case.
5. Do not lift while loaded.
6. Use as intended only.
7. Inspect before every use; do not use if parts are loose or damaged.

There may be minor changes to the numbers included in the user manual without prior notice.

Manufacturer: Shanghai Muxin Muye Youxian Gongsi

Address: Shuangcheng Road 803, Lane 11, Room 1602A-1609, Baoshan District, Shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consultin Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

EC

REP

Technical Support and E-Warranty Certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Model: BW-90D

Model: BW-120

Riser vent

Figure 1

TYPE SPECIFICATION

Couleur du modèle	Capacité (L)	Dimension extérieure (mm)	Accessoires
BW-90S Noir	90	L645*L445*H610	/
BW-90D Bleu	90	L625*L447*H755	Roue directionnelle 4"*2PCS; Roue omnidirectionnelle 4"*2PCS; Vis 8*20mm*16PCS; Cale*16PCS; Joint antidérapant * 16PCS;
BW-120 Noir	120	L625*L445*H790	Roue directionnelle 4"*2PCS; Roue omnidirectionnelle 4"*2PCS; Vis 8*20mm*16PCS; Cale*16PCS; Joint antidérapant * 16PCS;
ZF-30 Noir /	30	L627*L430*H310
BT-30S Noir	30	L435*L435*H540	/
EP-90L Noir /	90	L640*L435*H600

INCUBATOR LOADING PLATE DIAGRAM

SAFETY INSTRUCTIONS

WARNING:

Route, Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

Model: BW-90D

Model: BW-120

Riser vent

Figure 1

TYPE SPECIFICATION

SAFETY INSTRUCTIONS

WARNING:

YH CONSULTING LIMITED. C/O YH Consulting

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Model: BW-90D

Model: BW-120

Imported into AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD

New South Wales 2122 Australia

Model: BW-90D

Model: BW-120

Model: BT-30S

Model: EP-90L

www.vevor.com/support

Riser vent

Figure 1

YH CONSULTING LIMITED. IN CHARGE OF YH Consulting

Road, Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr. 69,

Model: BW-90D

Model: BW-120

www.vevor.com/support

Riser vent

Figure 1

TYPE SPECIFICATION

SAFETY INSTRUCTIONS

WARNING:

YH CONSULTING LIMITED. C/O YH Consulting

Office Limited 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

Przedstaw ciel UE

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

Model: BW-90D

Model: BW-120

NEED HELP? CONTACT US!

www.vevor.com/support

SAFETY INSTRUCTIONS

WARNING:

Model: BW-90D

Model: BW-120

Riser vent Figure 1

TYPE SPECIFICATION

Modell färg		Kapacitet (L)	Yttre dimension (mm)	Tillbehör
BW-90S Svart		90	L645*W445*H610	/
BW-90D Blå		90	L625*W447*H755	4" Riktningshjul*2PCS;4" rundstrålande hjul*2PCS;8*20mm skruv*16PCS;Shim*16PCS;Anti-halk packning*16PCS;
BW-120 Svart		120	L625*W445*H790	4" Riktningshjul*2PCS;4" rundstrålande hjul*2PCS;8*20mm skruv*16PCS;Shim*16PCS;Anti-halk packning*16PCS;
ZF-30	Svart /	30	L627*W430*H310
BT-30S Svart		30	L435*W435*H540	/
EP-90L Svart /		90	L640*W435*H600

SCHEMATIC DIAGRAM OF THE INCUBATOR CHARGING BACK

SAFETY INSTRUCTIONS

WARNING:

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

www.vevor.com/support