2123A - Hand truck Vevor - Free user manual and instructions

Brand	Vevor
Model	2123A
Product Type	Hand Truck (material handling cart)
Material	Plastic + alloy steel
Maximum Load Capacity	80 kg (176 lb)
Assembly	Press the push button, pull the handle upward, open the plate until it forms a right angle with the frame
Handle Height	Adjustable, lockable in high position
Safety	No overloading, no transporting people, no use on stairs
Protection	Avoid prolonged sun exposure to prevent aging
Maintenance	Inspect accessories for wear, cracks, and damage before each use; replace defective parts immediately
Recommended Use	Ground handling, flat surfaces; do not go up or down stairs
Manufacturer	Shanghaimuxinmuyeyouxiangongsi, Shuangchenglu 803nong11hao1602A-1609shi, Baoshanqu, Shanghai 200000, China
EU Importer	E-CrossStu GmbH, Mainzer Landstr.69, 60329 Frankfurt am Main
UK Importer	YH CONSULTING LIMITED
Australia Importer	SIHAO PTY LTD, 1 ROKEVA STREET, ASTWOOD NSW 2122
USA Importer	Sanven Technology Ltd, Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
Technical Support	www.vevor.com/support
Warranty	Electronic warranty certificate available on Vevor website
Safety Instructions	Read and understand the manual before assembly, installation, use, or maintenance
Tool Type	Manual wheeled handling tool

Frequently Asked Questions - 2123A Vevor

How to assemble the Vevor 2123A hand truck?

To assemble the hand truck, first press the push button, then pull the handle upward. Open the plate until it forms a right angle with the frame. Pull the handle up to the highest position, where it locks automatically.

What is the maximum load capacity of the 2123A hand truck?

The maximum load capacity is 176 lb (80 kg). Never exceed this limit to avoid accidents and damage.

Can I transport people with this hand truck?

No, it is strictly forbidden to transport people under any circumstances. This hand truck is designed only for transporting goods.

Can I use the hand truck on stairs?

No, this product cannot be used to go up or down stairs. Use it only on flat surfaces.

How to maintain the Vevor 2123A hand truck?

Before each use, inspect the accessories for any wear, cracks, or damage. Replace defective parts immediately. Avoid prolonged sun exposure to prevent plastic aging.

What to do if a part is damaged?

If a part is damaged, replace it immediately before further use. Contact technical support via www.vevor.com/support for spare parts or assistance.

Where to find technical support for the 2123A hand truck?

Technical support and the electronic warranty certificate are available on the website www.vevor.com/support. You can ask questions and request help there.

What safety precautions should be observed?

Read the manual carefully before use. Do not overload the hand truck, do not transport people, do not use on stairs, and avoid fast movements near potholes. Keep these instructions.

What materials is the hand truck made of?

The hand truck is made of plastic and alloy steel, providing a good balance between lightness and strength.

How to contact Vevor customer service?

You can contact customer service via the website www.vevor.com/support. For urgent inquiries, refer to the importer information in the manual (e.g., Sanven Technology Ltd for the USA).

USER MANUAL 2123A Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

MODEL: 2123A

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent estimate of savings you might benefit from buying certain tools with us compared top brands and does not necessarily mean to cover all categories of tools offered are kindly reminded to verify carefully when you are placing an order with us actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

MODEL: 2123A

Exterior view of a gray and silver manual lift truck with two red wheels (no text or symbols visible)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of o user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you ag there are any technology or software updates on our product.

SAFETY INSTRUCTIONS

WARNING: Read and understand this manual before assembling, installing, operating, or servicing this product. Failure to follow these warnings and instructions can caus death, personal injury or damage to valuable property.

1. Please do not put it near flammable materials.
2. It is forbidden to carry people under any condition.
3. This product cannot be used to go up or down stairs.
4. Overload is strictly prohibited.
5. Don't move too fast when passing pothole areas.

SAVE THESE INSTRUCTIONS

PRODUCT PARAMETERS

Material: Plastic + Alloy Steel

Load capacity: Cannot exceed 176 lbs.

INSTRUCTIONS

1. Press the push button down first, pull the handle up and open the plate until it is in a right angle with frame. See fig.1, fig.2 and fig.3

Three identical 3D model of a gray and silver wheeled pallet jack with red wheels, shown from different angles (no text or symbols)

fig.1 fig.2 fig.3

1. Pull the handle up until it is in the highest position. At this position, handle will be locked. See fig.4 and fig.5.

fig.4 fig.5

MAINTENANCE

1. Avoid prolonged exposure to the sun to avoid aging.
2. Inspect accessories for wear, cracks and other damage before use, replace defective accessories immediately.

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd, Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

REPE

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main.

REPU

YH CONSULTING LIMITED.

R/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Exterior view of a gray and silver two-wheel lift (no text or symbols visible)

BESOIN D'AIDE? CONTACTEZ-NOUS!

PARAMÈTRES DU PRODUIT

INSTRUCTIONS

3D mechanical part with green directional arrows indicating motion or force vectors (no text or symbols)

fig.4

Exterior view of a gray and silver manual lift with two red wheels (no text or symbols visible)

fig.5

ENTRETIEN

C/O YH Consulting Limited Bureau 147, Centurion House, Route de Londres, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Exterior view of a gray and silver manual lift truck with two red wheels (no text or symbols visible)

ANWEISUNGEN

3D mechanical device with green directional arrows indicating motion or force vectors (no text or symbols)

Abb.4

Exterior view of a gray and silver manual lift with two red wheels (no text or symbols visible)

Abb.5

WARTUNG

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

elettronica www.vevor.com/support

Modello: 2123A

Exterior view of a gray and silver two-wheel lift (no text or symbols visible)

ISTRUZIONI

Importato in AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Exterior view of a gray and silver two-wheel lift (no text or symbols visible)

INSTRUCCIONES

Importado a AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Importado a EE. UU.: Sanven Technology Ltd, Suite 250, 9166 Anaheim Lugar, Rancho Cucamonga, CA 91730

E-CrossStu GmbH

Exterior view of a gray and silver two-wheel lift (no text or symbols visible)

POTRZEBUJESZ POMOCY? SKONTAKTUJ SIE Z NAMI!

INSTRUKCJE

3D mechanical part with green directional arrows indicating motion or force vectors (no text or symbols)

rys.4

Exterior view of a gray and silver manual lift with two red wheels (no text or symbols visible)

rys.5

KONSERWACJA

Importowane do AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

C/O YH Consulting Limited Biuro 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Exterior view of a gray and silver two-wheel lift (no text or symbols visible)

HULP NODIG? NEEM CONTACT MET ONS OP!

INSTRUCTIES

3D mechanical device with green directional arrows indicating motion or force vectors (no text or symbols)

figuur 4

Exterior view of a gray and silver manual lift truck with red wheels (no text or symbols visible)

figuur 5

ONDERHOUD

C/O YH Consulting Limited Kantoor 147, Centurion House, Londen Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Technische ondersteuning en e- garantiecertificaat www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

Modell: 2123A

Exterior view of a gray and silver two-wheel lift (no text or symbols visible)

BEHÖVER HJÄLP? KONTAKTA OSS!

INSTRUKTIONER

3D mechanical part diagram showing a lever mechanism with green and red directional arrows (no text or symbols)

fig.1 fig.2

3D mechanical part with green directional arrows indicating motion or force (no text or symbols)

Exterior view of a gray and silver manual lift with two red wheels (no text or symbols visible)

fig.3

3D mechanical part with green directional arrows indicating motion or force vectors (no text or symbols)

fig.4

Metallic handrail with red wheels and black handle (no text or symbols visible)

fig.5

UNDERHÅLL

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support