LY-1402-1 - Chair Vevor - Free user manual and instructions

USER MANUAL LY-1402-1 Vevor

Technical Support and E-Warranty Certificate

www.vevor.com/support

ACTIVE SEATING

USER MANUAL

MODEL NO.: LY-1402, LY-1402-1

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent of savings you might benefit from buying certain tools with us compared top brands and does not necessarily mean to cover all categories of tools offered are kindly reminded to verify carefully when you are placing an order with us actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

Active Seating

MODEL NO.: LY-1402, LY-1402-1

Line drawing of a mechanical component with a flanged top and rectangular base (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel fr contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instruction carefully before operating. VEVOR reserves a clear interpretation user manual. The appearance of the product shall be subject to product you received. Please forgive us that we won't inform you there are any technology or software updates on our product.

WARNING:

Please read this manual carefully before using the product. Failure do so may result in serious injury.

ASSEMBLY PRECAUTIONS

1. Assemble only according to these instructions. Improper assembly c create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Keep the assembly area clean and well-lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or when under the influence of alcohol drugs or medication.
6. The product capabilities apply to properly and completely assembled products only.
7. Assemble on a flat, level, hard and smooth surface capable of sa supporting the Active Seating.
8. For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap separate all parts in a clean work area.

SAVE THESE INSTRUCTIONS

USE PRECAUTIONS

TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:

1. This product is not a toy Do not allow children to play with or r item.
2. Do not exceed weight capacities, before moving.
3. Use only on a flat, level, hard and smooth surface capable of sa supporting a fully loaded Active Seating.
4. Use as intended only.

Inspect before every use; do not use if parts are loose or damaged.

Warning: DO NOT LEAN BACKWARD! Do not tilt the wobble stool violently beyond the vertical position to minimize the risk of fallir. Warning: Do not use the stool with only one foot or without any on the ground.

TECHNICAL SPECIFICATIONS

Model	LY-1402	LY-1402-1
Color	Blue/Green	Blue/Purple
Product Dimensions (LxWxH)(mm)	340*320*345	340*320*450
Packing Size(LxWxH)(mm)	340*170*360	365*180*440
Net Weight(kg)	About 1.8	About 2
Gross Weight(kg)	About 2.3	About 2.5

*Products such as specifications, appearance, and design are subject to modification without prior notice.

PACKAGE CONTENTS

Simple line drawing of a 3D oval-shaped object with concentric layers (no text or symbols)

A

B

Simple line drawing of a biological cell or tissue structure with internal structures (no text or symbols)

C

INSTALLATION INSTRUCTIONS

Insert the wide end of the triangular pole In the triangular groove hole of the base

B C

A

Fix the seat on the pole The other end (smaller end)

C

ole end

Simple line drawing of a cylindrical object mounted on a rectangular base with slats (no text or symbols)

A

Complete installation

B

Simple line drawing of a pushpin with a circular head and perforated base (no text or symbols)

C

DISASSEMBLY INSTRUCTIONS

A B Support the seat with force Pull it away from the base C

Simple line drawing of a mechanical component with labeled points A and B, showing a cylindrical shaft and base (no text or symbols beyond labels)

B after the same method Remove the pole from the seat A

COMPLETION

Line drawing of a mechanical component with a flanged top and rectangular base (no text or symbols)

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Ma

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion H

London Road, Staines-upon-Thames, Surrey, TW18 4

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Line drawing of a mechanical component with a flanged top and rectangular base (no text or symbols)

Technical Support and E-Warranty Certificate www.vevor.com/support

Simple line drawing of a 3D oval object with concentric layers (no text or symbols)

A

Simple line drawing of a rectangular object with two vertical slots, resembling a battery or container (no text or symbols)

B

Line drawing of a food item inside a rectangular container with slotted patterns (no text or symbols)

C

INSTALLATION INSTRUCTIONS

graph TD
    A["Insert the wide end of the triangular pole\nIn the triangular groove hole of the base"] --> B["Fix the seat on the pole\nThe other end (smaller end)"]
    B --> C["Complete installation"]

DISASSEMBLY INSTRUCTIONS

A B Support the seat with force Pull it away from the base C B A B after the same method Remove the pole from the seat A

COMPLETION

Line drawing of a mechanical component with a flanged top and rectangular base (no text or symbols)

Fabricant : Shanghaimuxinmuyeyouxiangongsi

Adresse : Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Importé en Australie : SIHAO PTY LTD. 1 ROKEVA STREETASTWC NSW 2122 Australie

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent estimate of savings you might benefit from buying certain tools with us compared top brands and does not necessarily mean to cover all categories of tools offered are kindly reminded to verify carefully when you are placing an order with us actually saving half in comparison with the top major brands.

MODELL NR.: LY-1402, LY-1402-1

Line drawing of a mechanical component with a flanged top and rectangular base (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel fr contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instruction carefully before operating. VEVOR reserves a clear interpretation user manual. The appearance of the product shall be subject to product you received. Please forgive us that we won't inform you there are any technology or software updates on our product.

WARNUNG:

Simple line drawing of a layered oval object (no text or symbols)

A

B

Line drawing of a stylized food item with a central bowl and side panes (no text or symbols)

C

INSTALLATION INSTRUCTIONS

graph TD
    A["Insert the wide end of the triangular pole\nIn the triangular groove hole of the base"] --> B["Fix the seat on the pole\nThe other end (smaller end)"]
    B --> C["Complete installation"]

DISASSEMBLY INSTRUCTIONS

A B Support the seat with force Pull it away from the base C B A B after the same method Remove the pole from the seat A

COMPLETION

Line drawing of a mechanical component with a flanged top and rectangular base (no text or symbols)

Adresse : Shuangchenglu 803nong11hao1602A-1609shi, Baoshanqu, Shanghai 200000 CN.

Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Ma

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion H

London Road, Staines-upon-Thames, Surrey, TW18 4

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent of savings you might benefit from buying certain tools with us compared top brands and does not necessarily mean to cover all categories of tools offered are kindly reminded to verify carefully when you are placing an order with us actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

Active Seating

MODELLO N.: LY-1402, LY-1402-1

Line drawing of a mechanical component with a flanged top and rectangular base (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel fr contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instruction carefully before operating. VEVOR reserves a clear interpretation user manual. The appearance of the product shall be subject to product you received. Please forgive us that we won't inform you there are any technology or software updates on our product.

AVVERTIMENTO:

Simple line drawing of a layered oval object (no text or symbols)

A

B

Line drawing of a food tray with a central bowl and side panes (no text or symbols)

C

INSTALLATION INSTRUCTIONS

Insert the wide end of the triangular pole In the triangular groove hole of the base

B C

Fix the seat on the pole The other end (smaller end)

Simple line drawing of a circular object with an arrow pointing downward (no text or symbols)

(smaller end) B C

A

Complete installation

B

Simple line drawing of a pushpin with a circular head and rectangular base (no text or symbols)

C

DISASSEMBLY INSTRUCTIONS

Simple line drawing of a support structure with labeled points A and B (no text or symbols beyond labels)

Support the set Pull it away from C

Support the seat with force Pull it away from the base

Simple line drawing of a mechanical component with labeled points A and B, showing a conical top and flange base (no text or symbols beyond labels)

B

after the same method Remove the pole from the seat

A

Simple line drawing of a cross-section with an upward arrow, no text or symbols present

COMPLETION

Line drawing of a mechanical component with a cylindrical shaft and flanged base (no text or symbols)

Indirizzo : Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Importato in AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

C/O YH Consulting Limited Office 147, Centurion H

London Road, Staines-upon-Thames, Surrey, TW18 4

VEVOR®

TOUGH TOOLS, HALF PRICE

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent of savings you might benefit from buying certain tools with us compared top brands and does not necessarily mean to cover all categories of tools offered are kindly reminded to verify carefully when you are placing an order with us actually saving half in comparison with the top major brands.

N.° DE MODELO: LY-1402, LY-1402-1

Line drawing of a mechanical component with a flanged top and rectangular base (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel fr contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instruction carefully before operating. VEVOR reserves a clear interpretation user manual. The appearance of the product shall be subject to product you received. Please forgive us that we won't inform you there are any technology or software updates on our product.

ADVERTENCIA:

Simple line drawing of a layered oval object (no text or symbols)

A

B

Simple line drawing of a rectangular container with internal compartments and a central oval object (no text or symbols)

C

INSTALLATION INSTRUCTIONS

Insert the wide end of the triangular pole In the triangular groove hole of the base

B C

Fix the seat on the pole The other end (smaller end)

Simple line drawing of a circular object with an arrow pointing downward (no text or symbols)

(smaller end) B C

A

Complete installation

B
C

Simple line drawing of a pushpin with a circular head and rectangular base (no text or symbols)

DISASSEMBLY INSTRUCTIONS

Simple line drawing of a support structure with labeled points A and B (no text or symbols beyond labels)

Support the set Pull it away from C

Simple line drawing of a mechanical component with labeled points A and B, showing a conical top and flange base (no text or symbols beyond labels)

after the same method Remove the pole from the seat

Diagram of a biological or geological cross-section with concentric layers and an upward arrow, labeled 'A' (no text or symbols within the diagram itself)

COMPLETION

Line drawing of a mechanical component with a cylindrical shaft and flanged base (no text or symbols)

Dirección : Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Importado a AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Importado a EE. UU.: Sanven Technology Ltd., Suite 250, 9166 Anal Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Ma

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion H

London Road, Staines-upon-Thames, Surrey, TW18 4

VEVOR®

TOUGH TOOLS, HALF PRICE

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent of savings you might benefit from buying certain tools with us compared top brands and does not necessarily mean to cover all categories of tools offered are kindly reminded to verify carefully when you are placing an order with us actually saving half in comparison with the top major brands.

MODEL NR: LY-1402, LY-1402-1

Line drawing of a mechanical component with a flanged top and rectangular base (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel fr contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instruction carefully before operating. VEVOR reserves a clear interpretation user manual. The appearance of the product shall be subject to product you received. Please forgive us that we won't inform you there are any technology or software updates on our product.

OSTRZEŻENIE:

Simple line drawing of a 3D oval object with no text or symbols

A

B

Line drawing of a rectangular container with internal compartments and a central oval object (no text or symbols)

C

INSTALLATION INSTRUCTIONS

graph TD
    A["Insert the wide end of the triangular pole\nIn the triangular groove hole of the base"] --> B["Fix the seat on the pole\nThe other end (smaller end)"]
    B --> C["Complete installation"]

DISASSEMBLY INSTRUCTIONS

A B Support the seat with force Pull it away from the base C

Simple line drawing of a mechanical component with labeled points A and B, showing a cylindrical shaft and base (no text or symbols beyond labels)

B after the same method Remove the pole from the seat A

COMPLETION

Line drawing of a mechanical component with a flanged top and rectangular base (no text or symbols)

Adres : Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, szanghaj 200000 CN.

Import do AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD N 2122 Australia

Import do USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim F Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Ma

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion H

London Road, Staines-upon-Thames, Surrey, TW18 4

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technisch Ondersteuning en e-garantiecertificaat www.vevor.com/support

ACTIEVE ZITPLAATSEN

HANDLEIDING

MODELNR.: LY-1402, LY-1402-1

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent estimate of savings you might benefit from buying certain tools with us compared top brands and does not necessarily mean to cover all categories of tools offered are kindly reminded to verify carefully when you are placing an order with us actually saving half in comparison with the top major brands.

MODEL NR.: LY-1402, LY-1402-1

Line drawing of a mechanical component with a flanged top and rectangular base (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel fr contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instruction carefully before operating. VEVOR reserves a clear interpretation user manual. The appearance of the product shall be subject to product you received. Please forgive us that we won't inform you there are any technology or software updates on our product.

WAARSCHUWING:

Simple line drawing of a layered oval object (no text or symbols)

A

B

Simple line drawing of a rectangular container with internal compartments and a central oval object (no text or symbols)

C

INSTALLATION INSTRUCTIONS

Insert the wide end of the triangular pole In the triangular groove hole of the base

B C

A

Fix the seat on the pole The other end (smaller end)

C

Simple line drawing of a cylindrical object mounted on a perforated base, labeled 'B' (no text or symbols on the object itself)

A
B

Simple line drawing of a pushpin with a circular handle and perforated base (no text or symbols)

C

DISASSEMBLY INSTRUCTIONS

Simple line drawing of a support structure with labeled points A and B (no text or symbols beyond labels)

Support the set Pull it away from C

Support the seat with force Pull it away from the base

Simple line drawing of a mechanical component with labeled points A and B, showing a conical top and flange base (no text or symbols beyond labels)

B

after the same method Remove the pole from the seat

A

Simple line drawing of a cross-section with an upward arrow, no text or symbols present

COMPLETION

Line drawing of a mechanical component with a cylindrical shaft and flanged base (no text or symbols)

Adres : Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Ma

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion H

London Road, Staines-upon-Thames, Surrey, TW18 4

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent estimate of savings you might benefit from buying certain tools with us compared top brands and does not necessarily mean to cover all categories of tools offered are kindly reminded to verify carefully when you are placing an order with us actually saving half in comparison with the top major brands.

MODELLNR: LY-1402, LY-1402-1

Line drawing of a mechanical component with a flanged top and rectangular base (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel fr contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instruction carefully before operating. VEVOR reserves a clear interpretation user manual. The appearance of the product shall be subject to product you received. Please forgive us that we won't inform you there are any technology or software updates on our product.

WARNING:

Simple line drawing of a layered oval object (no text or symbols)

A

B

Line drawing of a food tray with a central bowl and side panes (no text or symbols)

C

INSTALLATION INSTRUCTIONS

Insert the wide end of the triangular pole In the triangular groove hole of the base

B C

A

Fix the seat on the pole The other end (smaller end)

C

Simple line drawing of a cylindrical object mounted on a perforated base, labeled 'B' (no text or symbols on the object itself)

A
B

Simple line drawing of a pushpin with a circular head and rectangular base (no text or symbols)

C

DISASSEMBLY INSTRUCTIONS

Simple line drawing of a support structure with labeled points A and B (no text or symbols beyond labels)

Support the set Pull it away from C

Simple line drawing of a mechanical component with labeled points A and B, showing a conical top and flange base (no text or symbols beyond labels)

after the same method Remove the pole from the seat

Diagram of a biological or geological cross-section with concentric layers and an upward arrow, labeled 'A' (no text or symbols within the diagram itself)

COMPLETION

Line drawing of a mechanical component with a cylindrical shaft and flanged base (no text or symbols)

Adress : Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Importerad till AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOC NSW 2122 Australien

Importerad till USA: Sanven Technology Ltd., Suite 250, 9166 Anahe Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Ma

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion H

London Road, Staines-upon-Thames, Surrey, TW18 4

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support