TR183636A3GW4C - Kitchen cart Vevor - Free user manual and instructions
Find the device manual for free TR183636A3GW4C Vevor in PDF.
| Product Type | Grid Kitchen Cart |
| Model | TR183636A3GW4C |
| Static Load Capacity | 300 kg (661 lb) |
| Dynamic Load Capacity | 160 kg (353 lb) |
| Number of Metal Shelves | 2 |
| Number of Metal Baskets | 1 |
| Number of Casters | 4 (with brake?) – not specified, default without brakes |
| Number of Hooks | 6 |
| Frame Material | Steel |
| Shelf Material | Wire mesh with PP mat |
| Included Accessories | 28 plastic clips, 4 casters, 6 hooks, 2 PP mats for shelves, 1 PP mat for basket |
| Net Weight | Not specified, estimated ~15-20 kg |
| Dimensions (L x W x H) | Not specified, typical dimensions ~90 x 40 x 90 cm |
| Recommended Usage | Flat, hard, and level surface |
| Care and Cleaning | Wipe with a damp cloth, dry immediately |
| Safety | Do not sit or stand; do not exceed maximum load; check before each use |
| Warranty | Electronic warranty certificate available at www.vevor.com/support |
| Repairability | Spare parts available on request from Vevor support |
Frequently Asked Questions - TR183636A3GW4C Vevor
User questions about TR183636A3GW4C Vevor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Kitchen cart in PDF format for free! Find your manual TR183636A3GW4C - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TR183636A3GW4C by Vevor.
USER MANUAL TR183636A3GW4C Vevor
Technical Support and E-Warranty Certificate www.vevor.com/support
Grid Kitchen Cart
Model: TR183636A3GW4C
We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.
VEVOR®
TOUGH TOOLS, HALF PRICE
Grid Kitchen Cart
MODEL: TR183636A3GW4C

NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact us:
Technical Support and E-Warranty Certificate www.vevor.com/support
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
Thank you for using this product. In order to make sure that you can operate the machine correctly, read this instruction carefully before operation and keep it properly for future reference. Please read the precautions and safety rules on this page to ensure your safe use. This manual will outline safety warnings and precautions, operating, maintenance and cleaning. The warnings and instructions reviewed in this manual cannot cover all possible conditions and situations that may occur. Caution and common sense are not built into this product, since we believe that the uses will comply with these codes.
PRODUCT PARAMETERS
| Model NO. | Static load bearing | Dynamic load bearing | PP Mat |
| TR183636A3GW4C | Max. 661.38 Pounds (About 300 Kg) | Max. 352.74 Pounds (About 160 Kg) | PP Mat for Wire Shelf * 2 PP Mat for Wire Basket * 1 |
Attention:
- The maximum load bearing capacity is obtained by placing the weights equally on the top two wire shelves and the bottom wire basket!
- Do not place all the weights on the same layer!
- The placement time under the maximum load bearing capacity shall not exceed 1 hour!
ASSEMBLY PRECAUTIONS
- Please assemble the product in strict accordance with the instructions. Incorrect assembly could be hazardous.
- Please wear safety goggles and work gloves properly during assembly.
- Do not try to assemble the product when feeling tired or when under the influence of alcohol, drugs or medication.
- Load bearing capacity and other product parameters are applied to the properly and completely assembled product only.
USE PRECAUTIONS
- This product is not a toy. Do not allow children to play with or get access to this item.
- Follow the intended uses only. Do not sit or stand on the cart.
- Check carefully before each use. Do not use if parts get loosened or damaged.
- Use on flat, level, and hard surfaces only.
- Do not exceed the listed load bearing capacity. Tighten all the knobs securely before placing weights on. Be aware of the dynamic load bearing capacity! Sudden load changes may temporarily cause excessive load, resulting in product failure.
ASSEMBLY INSTRUCTIONS
For additional information regarding the parts listed below, please refer to the Assembly Diagram of this manual. Unwrap and separate all parts in a clear work area.
| NO. A B C D | ||||
| Name | Wire Shelf Wire Basket Pole | Handle | ||
| Parts | ![]() | ![]() | ![]() | ![]() |
| Quantity | 2PCS 1PC 4PCS 1PC | |||
| NO. E F | G H I | ||||
| Name | Plastic Clip | Caster | Hook | PP Mat for Wire Shelf | PP Mat for Wire Basket |
| Parts | ![]() | ![]() | ![]() | ![]() | ![]() |
| Quantity | 28PCS | 4PCS | 6PCS | 2PCS | 1PC |
ASSEMBLY STEPS
STEP 1:
Screw the Casters (F) into the bottom of each Pole (C) by wrench. Then snap a pair of Plastic Clips (E) on the same lower grooves of each pole. Make sure the arrow of all plastic clips is pointed up, and the grooves of the pole are covered by the convex line of the plastic clips.

STEP 2:
Please make sure that you have the Wire Basket (B) correct way up. Keep collar gap of the basket downward. Then slide it from the top of each pole down onto the plastic clips until there is snug fit.

VEVOR®
TOUGH TOOLS, HALF PRICE
Technical Support and E-Warranty Certificate
www.vevor.com/support
STEP 3:
Set the cart upright. Refer to Step 1 and 2 to snap plastic clips on the same grooves of each pole at your desired position and assemble the first Wire Shelf (A) first. And then snap plastic clips on the same grooves of two poles and slide the Handle (D) down onto the plastic clips as shown in the figure below.

STEP 4:
Refer to Step 3 to snap plastic clips on the top grooves of each pole and assemble the remaining wire shelf.

STEP 5:
Hang the 6 pieces Hooks (G) onto the side of the top wire shelf frame as shown in the figure below.

STEP 6 :
Put the PP Mat (I) onto the wire basket as shown in the figure below.
Similarly, place two pieces of PP Mats (H) on two wire shelves respectively.

STEP 7
Firmly push down the corners of each shelf and basket by Rubber Mallet to make all the shelves and basket secure onto the plastic clips. Now the grid kitchen cart is completely assembled.


Manufacturer: Shanghaimuxinmuyeyouxiangongsi
Address: Shuangchenglu 803nong11hao1602A-1609shi,
baoshanqu, shanghai 200000 CN.
Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD
NSW 2122 Australia
Imported to USA: Sanven Technology Ltd. Suite 250,
9166 Anaheim Place, Rancho Cucamonga, CA 91730
| EC | REP |
E-CrossStu GmbH Mainzer Landstr.69,
60329 Frankfurt am Main.
| UK | REP |
YH CONSULTING LIMITED. C/O YH
Consulting Limited Office 147,
Centurion House, London Road,
Staines-upon-Thames, Surrey, TW18 4AX
VEVOR®
TOUGH TOOLS, HALF PRICE
NEED HELP? CONTACT US!
STEP 2:
VEVOR®
TOUGH TOOLS, HALF PRICE
STEP 3:
STEP 4:
STEP 5:
STEP 6:
STEP 7

Manufacturer: Shanghaimuxinmuyeyouxiangongsi
Address: Shuangchenglu 803nong11hao1602A-1609shi,
Baoshan District, Shanghai 200000 CN.
Imported into AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia
Imported into USA: Sanven Technology Ltd. Suite
250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
| EC | REP |
E-CrossStu GmbH Mainzer Landstr.69,
60329 Frankfurt am Main.
| UK | REP |
YH CONSULTING LIMITED. C/O YH
Consulting Limited Office 147,
Centurion House, London Road,
Staines-upon-Thames, Surrey, TW18 4AX
VEVOR®
TOUGH TOOLS, HALF PRICE
STEP 2:
VEVOR®
TOUGH TOOLS, HALF PRICE
www.vevor.com/support
STEP 3:
STEP 4:
STEP 5:
STEP 6:
STEP 7

Manufacturer: Shanghaimuxinmuyeyouxiangongsi
Address: Shuangchenglu 803nong11hao1602A-1609shi,
baoshanqu, Shanghai 200000 CN.
Imported into AUS by: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD
NSW 2122 Australia
9166 Anaheim Place, Rancho Cucamonga, CA 91730
| EC | REP |
E-CrossStu GmbH Mainzer Landstr.69,
60329 Frankfurt am Main.
| UK | REP |
YH CONSULTING LIMITED. C/O YH
Consulting Limited Office 147,
Centurion House, London Road,
Staines-upon-Thames, Surrey, TW18 4AX
VEVOR®
TOUGH TOOLS, HALF PRICE
NEED HELP? CONTACT US!
PRODUCT PARAMETERS
STEP 2:
VEVOR®
TOUGH TOOLS, HALF PRICE
STEP 3:
STEP 4:
STEP 5:
STEP 6:
STEP 7

Manufacturer: Shanghaimuxinmuyeyouxiangongsi
Address: Shuangchenglu 803nong11hao1602A-1609shi,
baoshanqu, Shanghai 200000 CN.
Imported in Australia: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia
250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
| EC | REP |
E-CrossStu GmbH, Mainzer Landstr. 69, 60329 Frankfurt am Main.
| UK | REP |
YH CONSULTING LIMITED, C/O YH
Consulting Limited, Bureau 147,
Centurion House, London Road,
Staines-upon-Thames, Surrey, TW18 4AX
VEVOR®
TOUGH TOOLS, HALF PRICE
Technical support and e-warranty certificate: www.vevor.com/support
Grid Kitchen Cart
Model: TR183636A3GW4C
NEED HELP? CONTACT US!
STEP 2:
VEVOR®
TOUGH TOOLS, HALF PRICE
www.vevor.com/support
STEP 3:
STEP 4:
STEP 5:
STEP 6:
STEP 7

Manufacturer: Shanghaimuxinmuyeyouxiangongsi
Address: Shuangchenglu 803nong11hao1602A-1609shi,
baoshanqu, shanghai 200000 CN.
250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
| EC | REP |
E-CrossStu GmbH Mainzer Landstr.69,
60329 Frankfurt am Main.
| UK | REP |
YH CONSULTING LIMITED. C/O YH
Consulting Limited Kantoor 147,
Centurion House, London Road,
Staines-upon-Thames, Surrey, TW18 4AX
VEVOR®
TOUGH TOOLS, HALF PRICE
NEED HELP? CONTACT US!
STEP 2:
VEVOR®
TOUGH TOOLS, HALF PRICE
www.vevor.com/support
STEP 3:
STEP 4:
STEG 5:
STEG 6:
STEG 7
Manufacturer: Shanghaimuxinmuyeyouxiangongsi
Address: Shuangchenglu 803nong11hao1602A-1609shi,
baoshanqu, shanghai 200000 CN.
Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia
Imported to USA: Sanven Technology Ltd. Suite 250,
9166 Anaheim Place, Rancho Cucamonga, CA 91730
| EC | REP |
E-CrossStu GmbH Mainzer Landstr.69,
60329 Frankfurt am Main.
| UK | REP |
YH CONSULTING LIMITED. C/O YH
Consulting Limited Office 147,
Centurion House, London Road,
Staines-upon-Thames, Surrey, TW18 4AX
VEVOR®
TOUGH TOOLS, HALF PRICE
STEP 2:
VEVOR®
TOUGH TOOLS, HALF PRICE
Machine Translated by Google
STEP 3:
STEP 4:
Machine Translated by Google
STEP 5:
STEP 6:
Machine Translated by Google
STEP 7

Manufacturer: Shanghaimuxinmuyeyouxiangongsi
250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
| EC | REP |
E-CrossStu GmbH Mainzer Landstr.69, 60329
Frankfurt am Main.
| UK | REP |
147, Centurion House, London Road,
Staines-upon-Thames, Surrey, TW18 4AX
VEVOR®
TOUGH TOOLS, HALF PRICE
STEP 2:
VEVOR®
TOUGH TOOLS, HALF PRICE
electronics www.vevor.com/support
STEP 3:
STEP 4:
STEP 5:
STEP 6:
STEP 7

Imported into AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia
250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
| EC | REP |
E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main.
| UK | REP |
YH CONSULTING LIMITED. C/O YH
Consulting Limited Office 147,
Centurion House, London Road,
Staines-upon-Thames, Surrey, TW18 4AX








