XPSNICHE1650 - Bathroom accessory Vevor - Free user manual and instructions

Product Type	Recessed Shower Niche
Brand	Vevor
Model	XPSNICHE1650
Dimensions (L x W x D)	Approx 127 x 40.6 x 10.2 cm (50 x 16 x 4 inches)
Material	Stainless steel
Net weight	Approx 3.5 kg
Maximum load capacity	15 kg
Main functions	Wall storage for shower items (shampoo, soap, etc.)
Installation type	Recessed into wall, requires cutting and sealing
Compatibility	Suitable for drywall, tile, etc.
Safety precautions	Wear safety glasses and gloves during installation; do not install if tired or under influence
Care and cleaning	Clean with a damp cloth and mild detergent; avoid abrasives
Package contents	Shower niche, installation manual
Warranty	Technical support and electronic warranty certificate via www.vevor.com/support
Repairability	Parts not available separately; contact support for any defects

Frequently Asked Questions - XPSNICHE1650 Vevor

What are the exact dimensions of the XPSNICHE1650 niche?

The approximate dimensions are 127 cm long, 40.6 cm wide, and 10.2 cm deep (50 x 16 x 4 inches).

What is the maximum weight supported by the niche?

The maximum load capacity is approximately 15 kg, allowing you to store several bottles of shower products.

How to properly install the Vevor shower niche?

Installation requires cutting into the wall, applying a sealant, then tiling. Follow the instructions in the manual for safe assembly.

Is a waterproofing treatment required before tiling?

Yes, it is imperative to use a waterproof sealant around the niche to prevent water infiltration.

Is the niche compatible with all types of tiles?

Yes, it adapts to most ceramic tiles and other materials. Ensure the tile thickness does not exceed the recess.

How to maintain the stainless steel niche?

Clean it with a soft cloth and soapy water. Avoid abrasive or acidic products that could scratch the surface.

What tools are needed for installation?

You will need a drywall saw, a level, a tape measure, work gloves, safety glasses, a sealant, and screws.

Is the niche provided with mounting accessories?

The niche is delivered ready to install, but screws and sealant are not included. Consult the manual for the full list.

Is there a warranty on the product?

Vevor offers technical support and an electronic warranty certificate. Register your product at www.vevor.com/support.

What to do if the niche is damaged or defective?

Contact Vevor customer service via www.vevor.com/support for replacement or repair under warranty.

USER MANUAL XPSNICHE1650 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

SHOWER NICHE

MODEL:

XPSNICHE1616/XPSNICHE1650/XPSNICHE1624/XPSNICHE1632/XPS NICHE161620

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent estimate of savings you might benefit from buying certain tools with us compared to top brands and does not necessarily mean to cover all categories of tools offered. We kindly remind you to verify carefully when placing an order with us whether you are actually saving half in comparison with the top major brands.

MODEL:

XPSNICHE1616/XPSNICHE1650/XPSNICHE1624/XPSNICHE1632/XPS

NICHE161620

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you if there are any technology or software updates on our product.

WARNING:

Please read this manual carefully before using the product. Failure to do so may result in serious injury.

WARNING:

Read this material before using this product. Failure to do so can result in serious injury.

Assembly precautions

1. Assemble only according to these instructions. Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Keep assembly area clean and well lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or when under the influence of alcohol, drugs, or medication.
6. Weight capacity and other product capabilities apply to properly and completely assembled product only.
7. For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap and separate all parts in a clean work area.

SAVE THIS MANUAL

1. Determine desired height of niche and draw level line on substrate.

1. Cut along line and remove top substrate layer. If necessary, install horizontal cross bracing to support Niche.

1. Use waterproof Sealant to adhere Niche to studs.

Seal joints between Niche and backer board with waterproof Sealant.

1. It is ready to tile; choose a different style of ceramic tile according to preferences.

Model	XPSNICHE1616	XPSNICHE1650	XPSNICHE1624	XPSNICHE1632	XPSNICHE161620
Product Size(inch)	4*16*16	4*16*50	4*16*24	4*16*32	4*16*40

Manufacturer: Shanghai Muxin Muye Youxian Gongsi

Address: Room 1602A-1609, No. 11, Lane 803, Shuangcheng Road, Baoshan District, Shanghai 200000, CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET, EASTWOOD NSW 2122, Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr. 69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

Modèle	XPSNICHE1616	XPSNICHE1650	XPSNICHE1624	XPSNICHE1632	XPSNICHE161620
ProduitTaille(pouce)	4*16*16	4*16*50	4*16*24	4*16*32	4*16*40

Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address:

Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported into Australia: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

YH CONSULTING LIMITED. C/O YH Consulting Limited

Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Modello	XPSNICHE1616	XPSNICHE1650	XPSNICHE1624	XPSNICHE1632	XPSNICHE161620
ProdottoMisurare(pollice)	4*16*16	Dimensioni: 4*16*50	Dimensioni: 4*16*24	Dimensioni: 4*16*32	Dimensioni: 4*16*40

Imported into AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported into USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

RAPPRESENTANZA DEL REGNO UNITO

YH CONSULTING LIMITED. C/O YH Consulting Limited Office

147, Centurion House, London Road, Staines-upon-

Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Magonza Landstr.69,

electronics www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Modelo	XPSNICHE1616		XPSNICHEXPS16241650	NXPSNICHE1632	XPSNICHE161620
ProductoTamaño(pulgada)		4*16*504*16*	16 4*16*24	4*16*32	4*16*40

Road, Staines-upon-Thames, Surrey, TW18 4AX

REPRESENTANTE CE

E-CrossStu GmbH

NEED HELP? CONTACT US!

Model	XPSNICHE1616	XPSNICHE1650	XPSNICHE1624	XPSNICHE1632	XPSNICHE161620
ProduktRozmiar(cal)	4*16*16	4*16*50	4*16*24	4*16*32	4*16*40

Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address:

Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

REP WIEL

KIEJ BRYTANII

Przedstaw ciel UE

YH CONSULTING LIMITED. C/O YH Consulting Limited

Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

Model	XPSNICHE1616	XPSNICHE1650	XPSNICHE1624	XPSNICHE1632	XPSNICHE161620
Product Maat (duim)	4*16*16	4*16*50	4*16*24	4*16*32	4*16*40

Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address:

Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

YH CONSULTING LIMITED. C/O YH Consulting Limited

Office 147, Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

warranty certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

Modell	XPSNICHE1616	XPSNICHE1650	XPSNICHE1624	XPSNICHE1632	XPSNICHE161620
ProduktStorlek(tum)	4*16*16	4*16*50	4*16*24	4*16*32	4*16*40

Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address:

Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

EC

REP

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

www.vevor.com/support