XPSNICHE161620 - Bathroom furniture Vevor - Free user manual and instructions

Product type	Recessed shower niche
Brand	Vevor
Model	XPSNICHE161620
Dimensions (L x W x H)	40 x 40 x 50 cm
Material	Stainless steel
Weight	Approximately 2 kg
Load capacity	Up to 5 kg
Use	Storage of shower products
Installation	Recessed in the wall, requires cutting and sealing
Mounting precautions	Wear ANSI safety glasses and gloves
Maintenance	Clean with a soft cloth and mild detergent
Safety	Use eye protection and gloves during assembly
Package contents	Shower niche, screws, sealing gasket
Warranty	Technical support via www.vevor.com/support
Certifications	ANSI approved safety glasses

Frequently Asked Questions - XPSNICHE161620 Vevor

How to install the Vevor XPSNICHE161620 shower niche?

Installation requires cutting an opening in the wall, installing the niche, and sealing it with a waterproof sealant. Follow the manual instructions for safe mounting.

What tools are needed for installation?

You will need a level, a utility knife, a tape measure, safety glasses, work gloves, and a waterproof sealant.

Is the niche waterproof?

Yes, the niche is designed to be waterproof once properly installed with a sealing gasket and waterproof sealant around the edges.

How much weight can the niche support?

The niche can support a maximum weight of about 5 kg, which is sufficient for shower bottles and accessories.

How to clean the shower niche?

Clean regularly with a soft cloth and a mild non-abrasive detergent. Avoid harsh chemicals that could damage the surface.

Can I paint the niche?

It is not recommended to paint the niche as the paint may peel due to moisture. The stainless steel surface is already durable and aesthetically pleasing.

Is the niche suitable for a walk-in shower?

Yes, the niche is ideal for walk-in showers. It easily recesses into the wall and provides convenient storage without protruding.

How to cut the tiles around the niche?

Measure the niche precisely, then cut the tiles according to the dimensions using a tile cutter or suitable grinder. Ensure the edges are clean before installation.

Is there a warranty for this product?

Vevor offers technical support via its website. The product is covered by a standard warranty, see the manual or www.vevor.com/support for details.

Where to find spare parts?

Spare parts can be ordered from Vevor customer service via www.vevor.com/support. Specify the model XPSNICHE161620 to get the correct references.

USER MANUAL XPSNICHE161620 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

SHOWER NICHE

MODEL:

XPSNICHE1616/XPSNICHE1650/XPSNICHE1624/XPSNICHE1632/XPSNICHE161620

We continue to be committed to providing you with tools at competitive prices. "Save Half", "Half Price", or any other similar expressions used by us only represent an estimate of savings you might benefit from buying certain tools with us compared to top brands, and does not necessarily mean to cover all categories of tools offered. We kindly remind you to verify carefully when placing an order with us that you are actually saving half in comparison with the top major brands.

MODEL:

XPSNICHE1616/XPSNICHE1650/XPSNICHE1624/XPSNICHE1632/XPS

NICHE161620

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves the right to interpret the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of any technology or software updates on our product.

WARNING:

Please read this manual carefully before using the product. Failure to do so may result in serious injury.

WARNING:

Read this material before using this product. Failure to do so can result in serious injury.

Assembly precautions

1. Assemble only according to these instructions. Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Keep assembly area clean and well lit.
4. Keep bystanders out of the area during assembly.

Do not assemble when tired or when under the influence of alcohol, drugs, or medication.

1. Weight capacity and other product capabilities apply to properly and completely assembled product only.
2. For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap and separate all parts in a clean work area.

SAVE THIS MANUAL

1. Determine desired height of niche and draw level line on substrate

1. Cut along line and remove top substrate layer. If necessary, install horizontal cross bracing to support Niche.

1. Use waterproof Sealant to adhere Niche to studs

4. Seal joints between Niche and backer board with waterproof Sealant

1. It is ready to tile, choose a different style of ceramic tile according to preferences.

Model	XPSNICHE1616	XPSNICHE1650	XPSNICHE1624	XPSNICHE1632	XPSNICHE161620
Product Size(inch)	4*16*16	4*16*50	4*16*24	4*16*32	4*16*40

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

Modèle	XPSNICHE1616	XPSNICHE1650	XPSNICHE1624	XPSNICHE1632	XPSNICHE161620
ProduitTaille(pouce)	4*16*16	4*16*50	4*16*24	4*16*32	4*16*40

Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address:

Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported into Australia: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

YH CONSULTING LIMITED. C/O YH Consulting Limited

Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

REPRÉSENTANT

DE LA CE

E-CrossStu GmbH

Mainzer Landstr.69,

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Modello	XPSNICHE1616	XPSNICHE1650	XPSNICHE1624	XPSNICHE1632	XPSNICHE161620
ProdottoMisurare(pollice)	4*16*16	Dimensioni: 4*16*50	Dimensioni: 4*16*24	Dimensioni: 4*16*32	Dimensioni: 4*16*40

Imported in AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Imported in USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

YH CONSULTING LIMITED. C/O YH Consulting Limited Office

147, Centurion House, London Road, Staines-upon-

Thames, Surrey, TW18 4AX

electronics www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Modelo	XPSNICHE1616		XPSNICHEXPS16241650	NXPSNICHE1632	XPSNICHE161620
ProductoTamaño(pulgada)		4*16*504*16*	16 4*16*24	4*16*32	4*16*40

Road, Staines-upon-Thames, Surrey, TW18 4AX

REPRESENTANTE CE

E-CrossStu GmbH

NEED HELP? CONTACT US!

Model	XPSNICHE1616	XPSNICHE1650	XPSNICHE1624	XPSNICHE1632	XPSNICHE161620
ProduktRozmiar(cal)	4*16*16	4*16*50	4*16*24	4*16*32	4*16*40

Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address:

Shuangchenglu 803nong11hao1602A-1609shi, Baoshan District, Shanghai 200000 CN.

Imported into AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Imported into USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

REP WIEL KIEJ BRYTANII

Przedsław ciel UE

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

Model	XPSNICHE1616	XPSNICHE1650	XPSNICHE1624	XPSNICHE1632	XPSNICHE161620
Product Maat (duim)	4*16*16	4*16*50	4*16*24	4*16*32	4*16*40

Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address:

Shuangchenglu 803nong11hao1602A-1609shi, Baoshan District, Shanghai 200000 CN.

YH CONSULTING LIMITED. C/O YH Consulting Limited

Office 147, Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

warranty certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

www.vevor.com/support

Modell	XPSNICHE1616	XPSNICHE1650	XPSNICHE1624	XPSNICHE1632	XPSNICHE161620
ProduktStorlek(tum)	4*16*16	4*16*50	4*16*24	4*16*32	4*16*40

Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address:

Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

EC

REP

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support