80E01C - Nautical accessory Vevor - Free user manual and instructions

Product Type	Boat Fender (bumper)
Brand	Vevor
Model	80E01C
Dimensions (per piece)	585 × 186 mm
Weight (per piece)	0.95 kg
Number of pieces	4
Main Material	Reinforced PVC (vinyl)
Included Accessories	4 ropes (ø9.5 mm × 1.6 m), 1 air pump, 4 needles, 1 storage bag
Power Supply	None (manual inflation)
Main Function	Protection of the boat hull from impacts with docks or other boats
Installation	Inflate with the pump, then attach to the boat cleats using the ropes passed through the eyelets
Recommended Number	One fender every 3 meters of waterline, at least 3 on one side
Usage	Daytime use only, remove after each use
Maintenance	Rinse with clean water, dry, store in a dark and dry place
Safety	Do not use for long-term mooring or storage; check for damage before each use
Repairability	Spare parts available: ropes, needles, pump. Can be repaired with a patch if a hole occurs.
Warranty	Electronic warranty certificate available at www.vevor.com/support
Origin	Made in China

Frequently Asked Questions - 80E01C Vevor

How to inflate the boat fender?

Insert the supplied needle into the pump, then inflate the fender by pumping until the desired size. Remove the needle after inflation.

How to attach the fender to the boat?

Pass the rope through the top eyelet of the fender and the rope loop. Tie the rope to the boat cleat with a secure knot to prevent it from falling.

How many fenders are needed for my boat?

Place one fender every 3 meters (10 feet) of waterline, with at least 3 fenders along one side. For example, for a 6 m (20 ft) boat, plan for at least 3 fenders.

Can I leave the boat fender in the water permanently?

No, it is recommended to remove the fender after each use. Do not use it for long-term mooring or boat storage.

What are the important safety warnings?

Do not use the fender in extreme weather conditions. Check that it is not damaged before each use. Only use it during the day and remove it after use.

How to maintain the boat fender?

Rinse with clean water, dry with a clean cloth. Avoid high temperatures, chemicals, and sharp objects. Store in a dark place to extend its lifespan.

What to do if the boat fender leaks?

If you notice a leak, reinflate it in time. If the leak is significant, replace the fender with a new one to avoid damaging your hull.

What accessories are included with the 80E01C model?

The set contains 4 fenders, 4 ropes (ø9.5 mm × 1.6 m), 1 air pump, 4 needles, and 1 storage bag.

Where to find technical support and warranty?

Technical support and the electronic warranty certificate are available at www.vevor.com/support.

What are the exact dimensions of the 80E01C fender?

Each fender measures 585 mm in length and 186 mm in diameter, with a weight of 0.95 kg.

USER MANUAL 80E01C Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

BOAT FENDER

MODEL: 80E01B 80E01C 80E01D

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent of savings you might benefit from buying certain tools with us compared top brands and does not necessarily mean to cover all categories of tools offered are kindly reminded to verify carefully when you are placing an order with us actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

Boat Fender

MODEL: 80E01B 80E01C 80E01D 80E01B 80E01C 80E01D

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel fr contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instruction carefully before operating. VEVOR reserves a clear interpretation user manual. The appearance of the product shall be subject to product you received. Please forgive us that we won't inform you there are any technology or software updates on our product.

PARAMETER LIST

Model	80E01B	80E01C	80E01D
Product Size (mm)	510*150*150mm	585*186*186 mm	686*245*245 mm
Quantity (pcs)	4	4	4
Product Weight (kg/pc)	0.83	0.95	1.8

PART LIST

Model	Picture	Specification	Quantity
			80E01B	80E01C	80E01D
Fender			4	4	4
Ropes		Size: Φ9.5mm*1.6m	4	4	4
Air Pump		Size: 550*300*300mm	1	1	1
Needle			4	4	4
Storage Bag			1	1	1

SECURITY & WARNINGS

1. The use of the fender is voluntary and done at your own risk.
2. VEVOR makes no claims regarding the protective qualities of the fender for your specific docking application.
3. Never use the fender in extreme weather conditions.
4. Supervise its use until you understand how it works and performs in your particular docking application.
5. For daytime use only.
6. Never use the fender for long-term mooring or boat storage.
7. VEVOR is not responsible for any damage to your boat or other property resulting from your use of the fender.
8. Remove the fender from your dock or boat after each use.
9. Updates on our product.

OPERATION

1. Insert the needle into pump 2. Inflate via pump 3. Take out the needle.

Pump the fender to the right size.

1. If the product leaks, please inflate it in time.

1. Use rope to fix the fender on each boat side.

5.1 Let the rope go through fender top eyelets and rope loop.

5.2 Attach the fender line to the boat cleat; tie a knot, ensuring it doesn't come loose.

STORAGE

• Please take off the fender when you are not using it. Store it in a cool, dry place. Rinse with clean water and dry with a dry towel.
• Avoid high temperatures, exposure to chemicals, and contact with sharp objects.
• Storing in a dark place is more conducive to prolonging the product's life.
• Before use, please check the fender surface for any damage. If it is damaged, please replace it with a new fender in time to avoid damage to your hull.
• Please use the fender correctly; be careful during the suspension process to avoid the fender falling into the sea.

APPLICATION

Place one fender at every 10ft of waterline, with at least 3 fenders along the side.

Boat Length	Minimum Fender at One Side
15-20FT	3
20-30FT	3
30-40FT	4
40-50FT	5
50-60FT	6

Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW : Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

Pooledas Group Ltd

Unit 5 Albert Edward House, The Pavilion Preston, United Kingdom

EC

REP

SHUNSHUN GmbH

Römeräcker 9 Z2021, 76351

Technical Support and E-Warranty Certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

STORAGE

Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai Imported in

Australia: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122

Australia

80E01B

80E01C

80E01D

STORAGE

STORAGE

Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai

Imported in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

RAPPRESENTANZA DEL REGNO UNITO

Pooledas Ltd Group

1. Insert the needle into the pump. 2. Inflate using the pump. 3. Remove the needle

STORAGE

Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

Pooledas Ltd Group

80E01B

80E01C

80E01D

NEED HELP? CONTACT US!

STORAGE

Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

REP WIEL KIEJ BRYTANII

Pooledas Ltd Group

Unit 5 Albert Edward House, The Pavilions

NEED HELP? CONTACT US!

STORAGE

Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai

Unit 5 Albert Edward House, The Pavilions

80E01C 80E01D80E01B

NEED HELP? CONTACT US!

STORAGE

Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai Imported

to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122

Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place,

Rancho Cucamonga, CA 91730

UK

REP

Pooledas Group Ltd

Unit 5 Albert Edward House, The Pavilions