MSW-25 - Hair Dryers MPM - Free user manual and instructions

USER MANUAL MSW-25 MPM

EN We wish you satisfaction from using the product and invite you to check a wide range of other MPM appliances.

Black and white photo of a hairless electric shaver with a gold clip, no visible text or symbols.

MSW-25

FFN NAVIASY HAARTROCKNER

STFINGTHPAS MAMION

HAPPYER

SCHI CHI VI UX

HA.SZARITO

ASCRUGACAPF

PIAUKU DZIOVINTUVAS

N=10/4V-1

SUSZARKA DO VI OSÓV

USCATOR DE PAR

OFH

ФИЛИНИВОЛОССИ

cz NAVOD K OBSLUZE 3

Close-up of a black textured object with gold textured bands and white floral elements (no visible text or symbols)

Folding design2-stage temperature control

Magnetic focusing nozzle Hanging hook

BEZPEČNOSTNÍ POKYNY PŘI POUŽÍVÁNÍ

• Read the instructions carefully before use.
• Do not handle the device with wet hands.
• Take special care when children are near the device.
• Do not use the device for purposes other than those for which it was intended.
• Do not immerse the device, cable or charger in water or other liquids.
• Do not leave the device unattended during operation.

- Always remove the plug from the mains socket when not in use or before cleaning.

- Never use a damaged device, including one with a damaged cord or plug, in which case have it repaired at an authorised service centre.

- Do not use the device outdoors.

- Do not hang the power cable on sharp edges or allow it to come into contact with hot surfaces.

- Do not place the device neither on hot surfaces, nor in close proximity of other electric devices, e.g. cookers, burners, ovens, etc.

- The device should be put on a dry, flat and stable surface.

- The device is intended for domestic use only.

-Always ensure that all parts of the device are correctly fitted before starting work.

- Use of accessories not recommended by the manufacturer may cause damage to the device, fire or personal injury.

- This equipment may be used by children of at least 8 years of age and by persons of diminished physical, mental capacity and lack of experience and knowledge of the equipment if supervision or instruction is provided regarding the safe use of the equipment so that the hazards involved are understood. Unsupervised children should not perform cleaning and maintenance of the equipment.

-Children should be supervised to ensure that they do not play with the equipment/device.

-Keep the device and its cord out of reach of children under 8 years of age.

- Do not pull the plug out of the power socket by pulling the cord.

- The equipment is not designed to operate using external timers or a separate remote control.

- Do not connect the plug to the power socket with wet hands.

- For the safety of children, please do not leave freely accessible parts of the packaging (plastic bags, cardboard boxes, polystyrene, etc.).

- WARNING! Do not allow children to play with the film. Danger of suffocation!

-Check that the power parameters on the device's rating plate correspond to the parameters of your power supply network.

- CAUTION! Before starting cleaning and maintenance works, disconnect the device from the power supply network and wait until it cools down completely after work. Do not submerge the device into water!

- CAUTION! Do not use sharp objects, abrasive polishes, solvents or other strong chemicals for cleaning since their use may cause damages to the device.

- Keep the appliance away from water!

- Do not use when taking a bath/shower!

- If the device accidentally falls into water, immediately disconnect the plug from the power socket!

- While drying, be careful not to let hair become caught in the air inlet and outlet holes.

- Do not direct hot air towards the eyes or other sensitive areas of the body.

- Do not wind the power cord around the device!

- The air outlet and air inlet openings must not be covered!

- For additional protection, it is advisable to install a residual current device (RCD) with a rated residual current not exceeding 30mA in the electrical circuit that supplies the bathroom. A specialist electrician should be consulted in this regard.

- When using the hair dryer in the bathroom, disconnect it from the power source after use, as the proximity of water is constituted a hazard, even when the device is turned off.

WARNING! Do not use this equipment near water.

WARNING! Do not use this equipment near bathtubs, showers, swimming pools and similar water tanks.

DESCRIPTION OF THE APPLIANCE

1. Focusing cap
2. Housing
3. Air inlet screen

4. Mode change switch

5. Folding handle

6. Hanging bracket
7. Power cable

BEFORE FIRST USE

1. Remove the device from the box, remove all bags, labels, cardboard profiles and fillers. Make sure the appliance has not been damaged during transport. Contact the seller in case of any doubts.
2. Make sure the electrical mains parameters match the technical data on the appliance's rating plate.

USING THE DRYER

1. Connect the dryer to a power source, making sure that the mode change button (4) is in the O position.
2. Use the mode change switch (4) to select your preferred speed setting:

▶ C – cool blowing
▶ 1 – light blowing of warm air
▶ 2 – strong blowing of warm air

1. When drying is complete, set the mode change button (4) to the O position.

The device is equipped with an air ionization function. Thanks to this feature, negative ions are released when the device is turned on, which, settling on the hair, cause positive charges to be neutralized. As a result, hair does not electrify, and individual strands are smoothed out.

CAUTION! During use, do not cover the air inlet screen (3), which is located at the back of the dryer, as the device can then easily overheat.

CLEANING AND MAINTENANCE

The device should be kept clean in order to ensure its proper functioning. Follow the rules below before cleaning.

1. Always disconnect the device from the power supply after use.
2. After the dryer has cooled down, wipe the outer part of the casing with a damp cloth.
3. Do not wrap the cord around the appliance, instead wind it loosely at the side.

CAUTION! Do not use sharp objects, abrasive polishes, solvents or other strong chemicals for cleaning since their use may cause damages to the device.

TECHNICAL DATA

Model MSW-25
Power supply 220-240V ~ 50-60HZ
Power 1800W
Off and standby mode available unavailable
Power consumption in standby mode -
Power consumption in off mode -
Power consumption in network standby mode	-
It automatically goes into standby mode after -
Automatically goes into shutdown mode after -
Network standby mode, if the device has a connection function with the appli cation	-
Length of mains cable 1.0 m

CAUTION! MPM agd S.A. reserves the right to technical changes.

Proper disposal of the product (waste electrical and electronic equipment)

Marking on the product indicates that after the service-life of the product expires, it should not be disposed with other type of municipal waste. Used equipment may have a negative impact on the environment and health of people due to potentially containing hazardous substances, mixtures and components. Mixing electric waste with other types of waste or disassembling those in an unprofessional manner may cause a release of substances that are hazardous to the environment and health.

Used equipment should be handed-over to a point for collection of electric waste. In order to obtain detailed information regarding the electric waste collection points, the user should contact the municipal point of electric waste collection or used equipment processing department.

BESCHRIJVING VAN HET APPARAAT

▶ C - chłodny nadmuch

Legible signature of the buyer